SHANGHAI, May 7, 2024
/PRNewswire/ -- Anycubic, a renowned brand in consumer 3D printing,
showcased its latest advancements at the highly anticipated TCT
Shanghai event, held at Booth number 8E22. The event coincided with
Anycubic's Annual Product Launch Event, hosted by James Ouyang, the co-founder of Anycubic.
Anycubic's booth exudes a sleek and modern aesthetic, primarily
adorned in crisp white. Accentuating this clean backdrop are four
vibrant decorative colors carefully curated from the PANTONE Color
Institute. These hues are strategically incorporated into the
featured display shelf and its backdrop, both constructed using
real PANTONE exclusive filaments. Additionally, the colors adorn
the aisle arch, infusing the entire stand with a lively and dynamic
ambiance. This attention to detail serves as a highlight for
Anycubic's latest innovation, the multi-color FDM Printer, Kobra 3
Combo, showcased at the event.
James took the stage in front of the featured display zone,
marking the beginning of the event. With passion and pride, he
embarked on a journey through Anycubic's remarkable achievements in
both FDM and resin printing technology. From the pioneering Kossel
series in 2015 to the latest multi-color Kobra 3 Combo,
highlighting the evolution from single-color to multi-color
printing and a staggering increase in printing speed from 50mm/s to
an impressive 600mm/s, James underscored Anycubic's commitment to
making optimal 3D printing technology accessible for
households.
In the realm of resin printing, Anycubic's venture into photonic
innovation began with the introduction of the Anycubic Photon in
September 2017. Fast forward to 2020,
and the Photon Mono X emerged onto the scene, boasting a
4K monochrome screen and a
significantly reduced 5-second per layer printing time. Further
enhancing precision and user experience, the Photon M3 Premium and
Photon Mono M5s Pro introduced innovative technologies, including
LighTurbo 2.0 and smart features, respectively. However, the latest
pinnacle of this journey is the introduction of the Photon Mono M7
Pro. This latest resin printer not only upholds the tradition of
precision but also elevates it with enhanced ultra-fast speed and a
host of new features designed to enhance ease of use.
"We are thrilled to debut our latest innovations at TCT Shanghai
2024," said James, co-founder of Anycubic. "With the launch of our
annual new products, we'd want our users could unleash their
creativity and explore endless possibilities in 3D printing"
James takes the lead in operating and showcasing Anycubic's
latest innovations, the Kobra 3 Combo and Photon Mono M7 Pro,
providing firsthand demonstrations of their capabilities.
Let's begin with the Kobra 3 Combo. This powerhouse boasts the
Anycubic Color Engine Pro (ACE Pro) at its core. ACE Pro enables
simultaneous printing in two linked boxes, accommodating up to
eight colors at once. With features like active drying and
side-drying functionality, combined with RFID recognition for
Anycubic filaments, the Kobra 3 Combo ensures optimal filament
conditions for up to 24 hours and seamless printing quality. With a
maximum printing speed of 600mm per minute (single-color mode) and
support from the Anycubic App and Slicer, the Kobra 3 Combo
delivers an unparalleled printing experience.
Next up is the Photon Mono M7 Pro, setting a new standard for
precision and performance in resin printing. Using regular resin,
the Photon Mono M7 Pro reaches a maximum print speed of around
130mm/h with a 0.1mm layer height. This speed increases to 170mm/h
when employing high-speed resin. With a high precision of
14K empowered by upgraded LighTurbo
3.0 and an impressive resolution of 13312×5120 that contributes an
XY axis measurement of 16.8×24.8 μm, the Photon Mono M7 Pro
promises intricate print quality and accuracy. Equipped with
advanced features such as dynamic light output compensation and the
Dynamic Temperature Controlling Resin Vat, this printer ensures
smooth and precise printing results every time. Moreover, with
support from Anycubic's Makeronline community platform, users can
connect, collaborate, and participate in dynamic competitions,
fostering creativity and innovation.
After presenting the Kobra 3 Combo and Photon Mono M7 Pro, James
proceeded to announce the addition of a 3D printing application
line to Anycubic's commercial offerings.
"The Application line signifies our commitment to bringing 3D
printing into every household," said James, co-founder of
Anycubic.
This new venture is aimed at providing practical and exciting
models and accessories to enhance the 3D printing experience for
users. With the introduction of models such as the Light Saber and
Star Tunnel, along with accompanying LED kits, Anycubic aims to
elevate the fun and practicality of 3D printing.
James also announced that there will be an online livestream
event tonight at 21:00 UTC+8. Anycubic will be inviting
representatives from PANTONE and influential figures from the
industry to participate in an in-depth discussion. The livestream
will feature detailed displays of Anycubic's latest products,
followed by a Q&A session where viewers can engage directly
with the hosts. Exciting prizes will also be up for grabs during
the event. Be sure to stay tuned for this exclusive opportunity and
potentially win some fantastic prizes!
The Livestream Information:
Time: 8 AM UTC-5 or 3 PM CET, May 7th,
2024.
Where to watch: YouTube, Facebook,TikTok
For more information about Anycubic and its latest 3D printing
solutions, visit Anycubic's website.
View original content to download
multimedia:https://www.prnewswire.com/news-releases/anycubic-debuts-its-annual-flagship-products-and-announces-a-new-business-department-at-tct-shanghai-2024-302138100.html
SOURCE ANYCUBIC