- Annual Report (10-K)
26 Marzo 2010 - 3:24PM
Edgar (US Regulatory)
Table of Contents
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
|
|
|
ý
|
|
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
|
For the fiscal year ended: December 31, 2009
|
or
|
o
|
|
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
|
For the transition period
from to
|
Commission File Number: 0-23678
BioSphere Medical, Inc.
(Exact Name of Registrant as Specified in Its Charter)
|
|
|
Delaware
(State or Other Jurisdiction of
Incorporation or Organization)
|
|
04-3216867
(I.R.S. Employer
Identification No.)
|
1050 Hingham Street, Rockland, Massachusetts
(Address of Principal Executive Offices)
|
|
02370
(Zip Code)
|
(781) 681-7900
(Registrant's telephone number, including area code)
Securities
registered pursuant to Section 12(b) of the Act:
|
|
|
Title of Class
|
|
Name of Each Exchange on Which Registered
|
Common Stock, $.01 par value per share
|
|
NASDAQ Global Market
|
Securities
registered pursuant to Section 12(g) of the Act:
None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Yes
o
No
ý
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.
Yes
o
No
ý
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act
of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the
past 90 days. Yes
ý
No
o
Indicate by check mark whether the registrant has submitted electronically and posted to its corporate Website, if any, every Interactive Data File required to be
submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period
that the registrant was required to submit and post such files). Yes
o
No
o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter)
is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this
Form 10-K or any amendment to this Form 10-K.
ý
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting
company. See definition of "large accelerated filer," "accelerated filer," and "smaller reporting company" in rule 12b-2 of the Exchange Act. (Check one):
|
|
|
|
|
|
|
Large accelerated filer
o
|
|
Accelerated filer
o
|
|
Non-accelerated filer
o
(Do not check if a smaller reporting company)
|
|
Smaller reporting company
ý
|
Indicate
by check mark whether the registrant is a shell company (as defined in rule 12b-2 of the Act).
Yes
o
No
ý
The aggregate market value of voting common stock held by non-affiliates of the registrant on June 30, 2009, was $24,741,889 based on the
closing price of the common stock as reported on the NASDAQ Global Market as of such date.
The
Registrant had 18,419,895 shares of common stock outstanding as of March 1, 2010.
Documents incorporated by reference:
Portions of the information required by Part III of Form 10-K will appear in the registrant's definitive Proxy Statement on
Schedule 14A for the 2010 Annual Meeting of Stockholders and are hereby incorporated by reference into this report.
Table of Contents
BioSphere Medical, Inc.
INDEX
2
Table of Contents
PART I
This annual report on Form 10-K contains forward-looking statements that involve risks,
uncertainties and assumptions that, if they never materialize or prove incorrect, could cause the results of BioSphere Medical, Inc. to differ materially from those expressed or implied by such
forward-looking statements. All statements other than statements of historical fact are statements that could be deemed forward-looking statements, including any projections of revenue, expenses,
earnings or losses from operations, or other financial items; any statements of the plans, strategies and objectives of management for future operations; any statements concerning product research,
development, regulatory approval and commercialization timelines; any statements about our expectations regarding market acceptance and market penetration for our products and product liability
challenges with respect to our products; any statements of expectation or belief; and any statements of assumptions underlying any of the foregoing. The risks, uncertainties and assumptions referred
to above include risks that are described in "Risk Factors" and elsewhere in this annual report on Form 10-K and that are otherwise described from time to time in our Securities and
Exchange Commission reports filed after this annual report on Form 10-K.
The forward-looking statements included in this annual report on Form 10-K represent our estimates as of the date of this annual report on
Form 10-K. We specifically disclaim any obligation to update these forward-looking statements in the future. These forward-looking statements should
not be relied upon as representing our estimates or views as of any date subsequent to the date of this annual report on Form 10-K. Unless the context otherwise requires, references
in this annual report on Form 10-K to "BioSphere," "we," "us" and "our" refer to BioSphere Medical, Inc. and our
subsidiaries.
Item 1. BUSINESS
OVERVIEW
We develop, manufacture and market products for medical procedures that use embolotherapy. Embolotherapy is the minimally invasive,
image-guided therapeutic introduction of various biocompatible substances into a patient's circulatory system to occlude a blood vessel, either to arrest or prevent hemorrhaging, or to devitalize or
destroy the structure by occluding its blood supply. Our core technologies consist of patented bioengineered polymers, which are chemical compounds created through the application of medical science,
engineering principles and manufacturing methods. These core technologies are used to produce miniature spherical embolic particles, or microspheres, that are designed to have uniquely beneficial
properties for a variety of medical applications.
We
currently market and sell four microsphere products:
-
-
Embosphere Microspheres,
which are marketed for symptomatic uterine
fibroids, hypervascularized tumors and arteriovenous malformations, in the United States, the European Union, the People's Republic of China and several other markets outside the United States;
-
-
EmboGold Microspheres,
which are marketed for hypervascularized tumors and
arteriovenous malformations in the United States, the European Union and several other markets outside the United States;
-
-
HepaSphere Microspheres,
which are marketed in the European Union, Brazil
and Russia for primary and metastatic liver cancer, and in the European Union and Russia for drug delivery in the treatment of primary and metastatic liver cancer; and
-
-
QuadraSphere Microspheres,
which are marketed for the treatment of
hypervascularized tumors and arteriovenous malformations in the United States.
Our
Embosphere® Microspheres and EmboGold® Microspheres have a number of beneficial properties that we believe make them well suited for embolotherapy procedures.
Because of their uniform spherical shape and soft, slippery surface, our particles are easy to inject through small
3
Table of Contents
catheters,
which enables an even distribution within the vessel network. Additionally, we offer these products to clinicians in calibrated size ranges so they can be selected to target the occlusion
of specific-sized vessels. The use of appropriately size-ranged microspheres is designed to produce more predictable results and optimize therapeutic benefit.
Our
expanding embolics, HepaSphere Microspheres and QuadraSphere® Microspheres, have different properties than Embosphere Microspheres and EmboGold Microspheres.
Specifically, HepaSphere Microspheres and QuadraSphere Microspheres have an ability to absorb fluids and expand to four times their dry state in the body while maintaining their spherical form.
HepaSphere Microspheres and QuadraSphere Microspheres occlude with a high degree of conformity to the vessel wall.
Our
strategic priorities are to accelerate our revenue growth by expanding the market for the minimally invasive treatment of symptomatic uterine fibroids using a treatment called
uterine fibroid embolization, or UFE, and by broadening treatment options for several medical conditions, including liver cancer.
Uterine
fibroids are noncancerous, or benign, hypervascular tumors growing within or on the wall of the uterus. Such tumors are treatable with UFE. UFE is a minimally invasive procedure
in which microspheres are injected through a microcatheter into the blood vessels that supply the uterus. Blood flow guides these particles into the network of vessels that preferentially flow toward
the fibroids, thereby blocking the blood supply to the fibroids but not the surrounding healthy tissue. Most patients with uterine fibroids are not initially symptomatic and remain untreated until the
patient experiences
symptoms such as abnormal bleeding, increased urinary frequency, pain, pelvic discomfort or fertility difficulties. In each of the years ended December 31, 2009, 2008 and 2007, the majority of
our revenue was derived from the sale of our Embosphere Microspheres for UFE, and we believe that UFE will remain the principal application for our microsphere products for the foreseeable future.
We
believe that there are growth opportunities for other embolotherapy procedures, notably in the treatment of other hypervascularized tumors, such as primary liver cancer tumors. Our
HepaSphere Microspheres are marketed and sold in Europe, Brazil and Russia for the treatment of primary and metastatic liver cancer. Our QuadraSphere Microspheres are identical in all respects to our
HepaSphere Microspheres. However, FDA regulations require that we conduct clinical trials and submit a marketing application which includes positive data from the clinical trials to the United States
Food and Drug Administration, or FDA, in order to obtain the approvals and clearances required to promote QuadraSphere Microspheres for the treatment of a specific disease or condition, including
primary and metastatic liver cancer. European Union regulations do not require preclearance clinical trials for this class of medical device on an indication-by-indication
basis. In October 2009, we submitted to the FDA an investigational device exemption, or IDE, application to commence a clinical trial to compare the effectiveness of our QuadraSphere Microspheres
combined with the chemotherapeutic agent doxorubicin against conventional transarterial chemoembolization with doxorubicin in patients with primary liver cancer. The FDA has advised us that our study
protocol will need to include survival as a primary endpoint for the trial, rather than overall tumor response rate at six months, which was the primary endpoint that we proposed in our initial IDE
application. Our satisfactory resolution of the FDA's comments on the IDE is a condition to starting the clinical trial. We are currently evaluating the FDA's protocol requirements for the trial,
including how the primary endpoint requirements will affect our plans regarding the size of the trial and the timeline and cost for completion. We have not reached a conclusion about whether or when
to undertake the clinical trial.
On
April 16, 2009, we entered into an international distribution agreement with Nippon Kayaku Co., Ltd., or Nippon Kayaku. The agreement grants Nippon Kayaku the
exclusive right to distribute our HepaSphere Microspheres and Embosphere Microspheres in Japan upon regulatory approval. The agreement provides that Nippon Kayaku is responsible for filing, obtaining
and
4
Table of Contents
maintaining
all regulatory approvals necessary for the sale, marketing, pricing and reimbursement of the products in Japan, including performing any clinical trials required as a result of seeking
such regulatory approvals in Japan. We anticipate a clinical trial in Japan will be necessary to seek such regulatory approval. Assuming we successfully obtain product approval, we will provide
HepaSphere Microspheres and Embosphere Microspheres to Nippon Kayaku for distribution and sale in Japan. Additionally, Nippon Kayaku has made a nonrefundable milestone payment of $1.00 million
in 2009 and has agreed to make up to $3.00 million in additional milestone payments based upon specified objectives, including achievement of clinical, regulatory and sales goals.
We
have a number of patent applications and issued U.S. patents related to the use of our microspheres for non-embolotherapy applications. Although our current focus is on
embolotherapy markets, and, as such, we are not currently devoting significant resources to research relating to non-embolotherapy applications, we believe that these
non-embolotherapy uses may provide us, at some point in the future, with development and commercialization opportunities through internal efforts or third-party licensing, collaboration or
similar opportunities.
We
were incorporated in Delaware in 1993. Our principal executive offices are located at 1050 Hingham Street, Rockland, Massachusetts 02370, and our telephone number is
(781) 681-7900.
We
maintain an Internet Web site with the address www.biospheremed.com. We are not including the information contained in our Web site as part of, or incorporating it by reference into,
this annual report on Form 10-K. We make our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on
Form 8-K and all amendments to those reports available free of charge on our Web site as soon as reasonably practicable after we electronically file those materials with, or furnish
those materials to, the United States Securities and Exchange Commission, or SEC. Our code of business conduct and ethics and the charters of the audit committee, compensation committee, and
nominating and corporate governance committee of our board of directors are all available on the corporate governance section of our Web site. Stockholders may request a free copy of any of these
documents by writing to Investor Relations, BioSphere Medical, Inc., 1050 Hingham Street, Rockland, Massachusetts, U.S.A. 02370 or submitting a request through the Web site.
BioSphere
Medical®, Embosphere®, EmboGold®, EmboCath® Plus, Sequitor®, Segway®, HepaSphere,
QuadraSphere®, Tenor, ask4UFE.com®, Ask4Tell4 and PassThru® are trademarks of BioSphere Medical, Inc. Other trademarks appearing in
this annual report on Form 10-K are the property of their respective holders.
INDUSTRY OVERVIEW
Embolotherapy Markets
Embolotherapy has been in use for more than 20 years by interventional radiologists to mechanically block the flow of blood to
treat certain peripheral tumors and arteriovenous malformations and to control blood loss. Interventional radiologists around the world employ embolotherapy procedures, including UFE and embolization
for the treatment of certain
cancers, including primary liver cancer tumors. We believe that an increasing number of uterine fibroid and liver cancer patients are seeking treatments with embolotherapy due to their desire for less
invasive treatment options than those presented by non-embolotherapy procedures.
Until recently, women suffering from uterine fibroids have had few treatment options. These treatment options include the
following:
-
-
Hysterectomy.
Hysterectomy is a surgical procedure to remove
the uterus. A hysterectomy may be performed as an open surgery with or without robotic assistance or as a laparoscopic
5
Table of Contents
procedure.
While hysterectomy has a relatively low complication rate, it requires a hospital stay of several days, a recovery period of up to six to eight weeks, and results in loss of fertility.
Furthermore, hysterectomies have been tied to adverse psychological effects, sexual and urinary dysfunction, as well as the onset of early menopause. In addition, for many women who have their ovaries
removed during hysterectomy, this treatment may result in the need for extended hormone replacement therapy.
-
-
Myomectomy.
Myomectomy is the surgical removal of the uterine
fibroids without removal of the uterus. It is usually performed on women who wish to preserve their fertility. Only fibroids that can be easily accessed and excised are candidates for removal with
this technique. Because some fibroids are difficult to identify while others are difficult to remove, there is a relatively high recurrence rate, between 10% and 60%, after myomectomy.
-
-
Drug Therapy and "Watchful Waiting."
Drug therapies include
nonsteroidal anti-inflammatory drugs, oral contraceptive pills, progestational agents and gonadotropin-releasing hormone agonists. Physicians may choose to monitor women with less severe
symptoms who elect against drug therapy and those seeking to conceive, and may determine to administer therapy only if the patient's condition worsens.
-
-
Other Treatments.
Other treatments for uterine fibroids
include high-intensity focused ultrasound and global endometrial ablation. High-intensity focused ultrasound is a method of delivering ultrasonic energy to a discrete point
with resultant heat and tissue destruction, but without causing a significant temperature increase or cellular injury to tissue in the path of the ultrasound beam. Global endometrial ablation
describes the minimally invasive application of energy to destroy the endometrial lining in women who are experiencing severe menstrual bleeding and who do not desire future pregnancy.
Liver cancer is one of the most prevalent forms of cancer worldwide. There are several types of liver cancer. Primary liver cancer
refers to cancer that begins within the liver itself. Chronic hepatitis B and chronic hepatitis C, inflammations of the liver associated with the hepatitis virus, are contributing factors to the
development of primary liver cancer. Primary liver cancer is typically diagnosed at a stage that is too advanced to cure surgically. As a result, the majority of patients diagnosed with primary liver
cancer are not surgical candidates. For these patients, existing treatment options are primarily designed to improve quality of life rather than cure the underlying disease. Metastatic liver cancer
occurs when cancer begins in another part of the body, such as the colon or breast, and then migrates, or spreads, to the liver. Metastatic liver cancer is more prevalent than primary liver cancer.
However, the rate of primary liver cancer is expected to increase due to the prevalence of hepatitis C, a key risk factor for primary liver cancer. Numerous studies and medical publications indicate
that embolotherapy has been used for at least 20 years to treat liver cancer. For example, particle embolization is commonly used in Japan to manage liver cancer patients. Embolic particles are
commonly injected with chemotherapeutic agents to control and target distribution of the chemotherapy agents, thereby increasing the therapeutic exposure at a specific area.
6
Table of Contents
PRODUCTS
The following tables summarize information about our principal products.
|
|
|
|
|
PRODUCT
|
|
CLEARED FOR THE FOLLOWING
INTENDED USES
|
|
PRINCIPAL GEOGRAPHIC APPROVALS
|
Microsphere Products:
|
|
|
|
|
Embosphere Microspheres
|
|
Uterine fibroids, hypervascularized tumors and other arteriovenous malformations
|
|
United States, Canada, European Union, Argentina, Brazil, Panama, Peru, Uruguay, Hong Kong, Taiwan, Israel, Australia, People's Republic of China, Russia, Switzerland, South Africa and New Zealand
|
EmboGold Microspheres
|
|
Hypervascularized tumors (other than uterine fibroids) and arteriovenous malformations
|
|
United States, Canada, European Union, Brazil, Panama, Peru, Uruguay, Hong Kong, Taiwan, Israel, Australia, Russia, Switzerland,
South Africa and New Zealand
|
HepaSphere Microspheres
|
|
Primary and metastatic liver cancer
|
|
Canada, European Union, Argentina, Brazil, Hong Kong, Israel, Australia, Russia, Switzerland and South Africa
|
HepaSphere Microspheres
|
|
Transarterial chemoembolization, or TACE, of hepatocellular carcinoma in combination with doxorubicin
|
|
European Union, Israel, Australia, Russia, Switzerland and South Africa
|
QuadraSphere Microspheres
|
|
Hypervascularized tumors and arteriovenous malformations
|
|
United States
|
Delivery System Products:
|
|
|
|
|
EmboCath Plus Infusion Microcatheter
|
|
Infusion of various diagnostic, embolic and therapeutic agents and super-selective angiography within peripheral vasculature
|
|
United States, Canada, European Union, Switzerland, Israel, South Africa, Panama and Peru
|
Sequitor Steerable Guidewire
|
|
Various diagnostic and interventional procedures within peripheral vasculature
|
|
United States, Canada, European Union, Switzerland, Israel, South Africa, Brazil, Panama, Peru and People's Republic of
China
|
Segway Guidewire
|
|
Peripheral embolization procedures
|
|
United States, Canada, Argentina, Brazil, Panama and People's Republic of China
|
Tenor Steerable Guidewire
|
|
Various diagnostic and interventional procedures within peripheral vasculature
|
|
United States
|
7
Table of Contents
Embosphere Microspheres
Our Embosphere Microspheres are intended for use in embolotherapy to block or control the blood supply to certain tumors and other
vascular malformations.
In
November 2002, we received 510(k) clearance from the FDA to market our Embosphere Microspheres for UFE. We were the first company to gain regulatory clearance to market a product for
UFE in the United States. Over the past three years, we have focused on growing our Embosphere Microsphere business through the development of physician-referral networks and patient-awareness
programs. In each of the years ended December 31, 2009, 2008, and 2007, the majority of our revenue was derived from the sale of our Embosphere Microspheres for UFE. We believe that UFE will
remain the principal application for our microsphere products for the foreseeable future.
Uterine
fibroid embolization is a minimally invasive procedure, performed principally by interventional radiologists, in which microspheres are injected through a small catheter into the
blood vessels that supply the uterus. Blood flow delivers these spheres into the network of vessels that preferentially supply the fibroids, thereby selectively blocking the blood supply to the
fibroids and minimizing impact to the surrounding healthy uterine tissue. The goal of the uterine fibroid-embolization procedure is to eliminate the flow of blood to the uterine fibroids, thereby
causing fibroid shrinkage and alleviating related symptoms, while attempting to preserve normal uterine and ovarian function.
We
believe that embolotherapy is a significantly more attractive alternative for treatment of uterine fibroids when compared to the invasiveness of such surgical procedures as
hysterectomy or myomectomy, or to drug therapy and "watchful waiting." Traditional therapies can have significant adverse side effects, including loss of fertility, lengthy recovery periods, high
costs, discomfort and risk of recurrence of fibroids. Embolotherapy may not be an alternative for patients with certain types of fibroids, allergies to contrast medium, or other
pre-existing medical conditions or patients who are pregnant. Third-party clinical data and publications support the safety, efficacy, cost-effectiveness and
long-term durability of UFE. The January 2008 issue of
Obstetrics & Gynecology
concluded that over the long term, and in a broad
range of practice settings, uterine artery embolization produces a high level of durable symptom control and results in a significant improvement in a woman's health-related quality of life.
Three-year data from the largest, multicenter, prospective voluntary registry on any procedure for benign uterine fibroids showed that 90 percent of the women participating avoided
a hysterectomy, and of these, 85 percent had a substantial improvement in symptoms and quality of life. In August 2008, the American College of Obstetricians and Gynecologists, or ACOG,
recommended UFE as a Level A alternative to hysterectomy, which means it is based on "good and consistent scientific evidence." We believe the ACOG Level A recommendation for UFE will be
a catalyst for increased acceptance of UFE as an effective alternative for patients who are on drug therapy or are considering undergoing surgery, such as hysterectomy or myomectomy, for treatment of
their uterine fibroids. As such, we anticipate that the number of UFE procedures will continue to increase.
Most
uterine fibroid embolization procedures can be performed in less than one hour, while the patient is sedated, but awake. The patient often stays overnight in the hospital to manage
any discomfort and/or pain associated with the procedure and typically returns to everyday activities in several days. In contrast, hysterectomy patients undergo general anesthesia and typically stay
in the hospital for two to three days and have a recovery period lasting up to six to eight weeks.
Embosphere
Microspheres have a variety of characteristics that we believe make them preferable to other currently marketed particles. These include:
-
-
Uniform Spherical Shape/Calibrated Particle Size.
We are able
to synthesize embolic particles with uniform sizing and a spherical shape. When embolic materials are nonspherical or irregularly sized, as is the case with the polyvinyl alcohol, or PVA, particles
that have been
8
Table of Contents
Embosphere
Microspheres are currently available in size ranges, from 40 to 1,200 microns. They are designed for targeted and controlled occlusions. They can be used with our accessory
catheter products or with other commercially available catheter and delivery systems.
EmboGold Microspheres
Our EmboGold Microsphere product contains a product enhancement that adds color to our Embosphere Microsphere product for improved
visibility in the syringe during preparation and injection. Our EmboGold Microspheres received 510(k) clearance from the FDA in 2001 for the treatment of hypervascularized tumors and arteriovenous
malformations. However, we do not have FDA clearance to market our EmboGold Microspheres for use in the treatment of uterine fibroids, and have determined not to seek such approval at this time.
HepaSphere Microspheres
In November 2004, we received CE Mark approval in the European Union to market our HepaSphere Microspheres for the treatment of primary
and metastatic liver cancer and hepatic metastases, and in December 2007, we received CE Mark approval for use of HepaSphere Microspheres with the delivery of doxorubicin for the same treatments. CE
Mark approval denotes conformity with European standards for quality and allows certified devices to be placed in the market in European Union countries.
In
June 2007, we received approval to market our HepaSphere Microspheres in Brazil for the treatment of primary and metastatic liver cancer.
9
Table of Contents
In
February 2009, we received approval to market our HepaSphere Microspheres with or without delivery of doxorubicin in Russia for treatment of primary and metastatic liver cancer and
hepatic metastases.
The
product attributes of HepaSphere Microspheres are:
-
-
the ability to absorb, or "carry," a chemotherapeutic agent;
-
-
an ability to expand and absorb fluids, such as saline, contrast agents and human serum, that creates expansion to four
times its dry-state diameter in the body64 times its initial volumewhile maintaining its spherical form;
-
-
a high degree of conformity to vessel anatomy; and
-
-
a capability for complete occlusion of a vessel with, on average, just a single particle.
Like
treatment of uterine fibroids, targeted liver embolotherapy is intended to starve the liver tumor without damaging the surrounding tissue or causing any adverse side effects to
other parts of the body, as would be observed with alternative therapies such as chemotherapy and radiation.
In
connection with the CE Mark approval of our HepaSphere Microspheres, we intend to conduct a post-market study in approximately ten European centers as part of an
international multi-site clinical trial.
QuadraSphere Microspheres
In November 2006, the FDA granted marketing clearance for our QuadraSphere Microspheres in the United States for the treatment of
hypervascularized tumors and peripheral arteriovenous malformations. The product attributes of QuadraSphere Microspheres are:
-
-
the ability to absorb, or "carry," a chemotherapeutic agent;
-
-
an ability to expand and absorb fluids, such as saline, contrast agents and human serum, that creates expansion to four
times its dry-state diameter in the body64 times its initial volumewhile maintaining its spherical form;
-
-
a high degree of conformity to vessel anatomy; and
-
-
a capability for complete occlusion of a vessel with, on average, just a single particle.
Our
QuadraSphere Microsphere product is technically identical in all respects to our HepaSphere Microsphere product. However, FDA regulations require that we conduct clinical trials
regarding the use of QuadraSphere Microspheres for the treatment of a specific disease or condition, including primary and metastatic liver cancer, while European Union regulations do not require
trials for this class of medical device on an indication-by-indication basis. In October 2009, we submitted to the FDA an IDE application to commence a clinical trial to
compare the effectiveness of our QuadraSphere Microspheres combined with the chemotherapeutic agent doxorubicin against conventional transarterial chemoembolization with doxorubicin in patients with
primary liver cancer. The FDA has advised us that our study protocol will need to include survival as a primary endpoint for the trial, rather than overall tumor response rate at six months, which was
the primary endpoint that we proposed in our initial IDE application. Our satisfactory resolution of the FDA's comments on the IDE is a condition to starting the clinical trial. We are currently
evaluating the FDA's protocol requirements for the trial, including how the primary endpoint requirements will affect
our plans regarding the size of the trial and the timeline and cost for completion. We have not reached a conclusion about whether or when to undertake the clinical trial.
10
Table of Contents
Delivery Systems
Our EmboCath Plus Infusion Microcatheter, Sequitor Steerable Guidewire and Tenor Steerable Guidewire products are used to deliver
embolization material into the target area. In developing these devices we sought to build on the advantages of our existing EmboCath Infusion Catheter and Segway Guidewire products by adding enhanced
tracking, torque response (guidewire products), and coating technology to the product lines. These products were also specifically designed to be used together to optimize performance.
EmboCath Plus Infusion Microcatheter.
The EmboCath Plus Infusion Microcatheter is a microcatheter that is designed to be used to
deliver embolic,
diagnostic and therapeutic agents into the peripheral vascular system for interventional procedures such as UFE and the embolization of other hypervascular tumors.
The
product attributes of the EmboCath Plus Infusion Microcatheter are:
-
-
controlled delivery, featuring the largest internal lumen diameter in its class0.028"which
provides a greater flow rate;
-
-
a flexible, kink-resistant, durable design that offers optimal balance for agile tracking;
-
-
a clear, chemo-compatible hub designed for smooth, continuous injection of microspheres; and
-
-
enhanced fluoroscopic ability via an extra-bright tip.
Sequitor Steerable Guidewire.
Our Sequitor Steerable Guidewire is designed specifically to complement our EmboCath Plus Infusion
Microcatheter.
Guidewires are used in most intravascular catheter procedures to establish a support structure for, and to facilitate placement of, the catheter. We designed our Sequitor Steerable Guidewire to
address the needs of interventionalists. The product attributes of Sequitor Steerable Guidewire are:
-
-
a durable atraumatic polymer tip that is designed to reduce the risk of vascular spasm but retain its shape for selective
vessel access;
-
-
a highly visible distal segment, comprised of a radiopaque coil and polymer jacket, which provides visibility under live
imaging;
-
-
a specially tempered wire core designed to transmit one-to-one torque response without kinking;
and
-
-
PassThru® lubricious, hydrophilic coating that facilities wire trackability.
Segway Guidewire.
Our Segway Guidewire is intended for placement of catheters for various peripheral vascular diagnostic and
interventional
procedures. It is a hydrophilic guidewire with composite construction providing a combination of support, softness and durability. The patented advanced composite construction combines a highly
supporting PFTE coated stainless steel shaft with a kink-resistant nitinol distal segment. The radiopaque soft platinum tip allows for smooth, selective access and the ultra slippery
surface enhances navigation through tortuous anatomy.
Tenor Steerable Guidewire.
Our Tenor Steerable Guidewire is also designed specifically to complement our EmboCath Plus Infusion
Microcatheter. We
designed our Tenor Steerable Guidewire as a second generation to our Sequitor Steerable Guidewire. The product attributes of the Tenor Steerable Guidewire are:
-
-
exceptional pushability and torqueability for precise navigation;
-
-
a specially designed distal core with a highly shapeable tip to suit challenging anatomy;
11
Table of Contents
-
-
a platinum coil supported by a radiopaque polymer jacket provides for accurate placement and increased durability;
-
-
hydrophilic coating for smooth tracking and superb handling; and
-
-
an environmentally friendly proximal polytetrafluoroethylene, or PTFE, coated core free of perfluorooctanic acid, or PFOA.
Other Products
We also sold barium delivery kits and other ancillary products in the European Union during 2008 and 2007. We purchased barium from a
third party and resold it for use in gastrointestinal medical testing. While we generated 3% and 9% of our revenue in 2008 and 2007, respectively, from these nonstrategic products, we phased out this
nonstrategic business during 2008 in order to focus on our core embotheraphy business.
MANUFACTURING AND SUPPLY
We currently produce and package all of our microsphere products at our facility in Roissy, France. Manufacturing of our microsphere
products includes the synthesis and processing of raw materials and third-party manufactured compounds. The assembly and packaging of delivery systems, which include the EmboCath Plus Infusion
Microcatheter, Sequitor Steerable Guidewire, Tenor Steerable Guidewire and Segway Guidewire are conducted by medical device contract manufacturers in the United States and Europe. We currently
purchase key components and services with respect to our microspheres, catheters and guidewires from approximately ten third-party vendors, including third parties from whom we purchase guidewires for
our catheters for our EmboCath Plus Infusion Microcatheter product and guidewires for our Sequitor Steerable Guidewire, Tenor Steerable Guidewire and Segway Guidewire products.
MARKETING AND SALES
In 2009, we marketed our embolotherapy and delivery systems products through a direct sales force covering 22 territories in the United
States and two territories in France, and through distributors in Europe, Asia, Canada, the Middle East, South America and other parts of
the world. Approximately 82% of our product revenue was generated through our direct sales force in 2009.
As
part of our sales and marketing efforts, we attend major medical conventions throughout the world pertaining to our targeted markets and invest in market development, including
physician training, practice building, referral network education and patient outreach. We work closely with major interventional radiology centers in the areas of training, therapy awareness
programs, clinical studies and ongoing research. In 2009, one of our key initiatives was what we have called "Community Health Talks," or CHTs, an educational outreach to women likely to have
symptomatic fibroids. These programs were executed in partnership with the hospital, with close collaboration between physicians in interventional radiology and gynecology. The goal of the CHT
initiative is to educate women about fibroids and all their available treatment options, even though they many not seek immediate consult for UFE. We believe these women typically will seek a consult
with their gynecologist or primary care or family practice physician who may then be referred back for a UFE sometime in the future.
No
single customer accounted for more than 10% of our revenue in 2009. Our principal source of revenue in each of the last three fiscal years was from sales of our microsphere products.
For the years ended December 31, 2009, 2008 and 2007, revenue from the sale of our microsphere products accounted for 94%, 92% and 85% respectively, of our total revenue.
On
April 16, 2009, we entered into an international distribution agreement with Nippon Kayaku Co. Ltd., or Nippon Kayaku. The agreement grants Nippon Kayaku the
exclusive right to
12
Table of Contents
distribute
our HepaSphere Microspheres and Embosphere Microspheres in Japan, upon regulatory approval. The agreement provides that Nippon Kayaku is responsible for filing, obtaining and maintaining
all regulatory approvals necessary for the sale, marketing, pricing and reimbursement of the products in Japan, including performing any clinical trials required as a result of seeking such regulatory
approvals in Japan. The distribution agreement establishes specified dates for the achievement of specified regulatory approval-related milestones by Nippon Kayaku and also provides that Nippon
Kayaku's failure to achieve such milestones shall constitute a material breach of the distribution agreement, except in the circumstances of an excused delay. As further provided in the distribution
agreement, Nippon Kayaku agrees to use diligent efforts to comply with its obligations thereunder.
Nippon
Kayaku has not been granted manufacturing rights under the distribution agreement and we have the right to terminate the distribution agreement on 18 months' prior written
notice if we determine to cease manufacturing the products; provided that we and Nippon Kayaku may elect to negotiate in good faith the terms of an exclusive royalty-bearing manufacturing license
grant to Nippon Kayaku if it desires to continue distributing the products for the remainder of the term of the distribution agreement.
Assuming
product approval, we will provide HepaSphere Microspheres and Embosphere Microspheres to Nippon Kayaku for distribution and sale in Japan in accordance with a predetermined
formula that is indexed to the Japanese government reimbursement rate. Additionally, Nippon Kayaku made a non-refundable milestone payment of $1.00 million in 2009 and has agreed to
pay up to $3.00 million in additional milestone payments based upon specified objectives, including achievement of clinical, regulatory and sales goals.
Assuming
regulatory approvals have been obtained, thereafter Nippon Kayaku is subject to minimum purchase requirements. Failure to meet such requirements will constitute a breach of the
distribution agreement, unless we elect to appoint Nippon Kayaku as a non-exclusive distributor in the territory. All intellectual property that arises out of Nippon Kayaku's performance
under the distribution agreement will be jointly owned by the parties in Japan and solely by us outside of Japan, subject to the terms of the distribution agreement. In addition, Nippon Kayaku agrees
not to compete with us during, or for a specified period of time after, the term of the distribution agreement, subject to limited exceptions.
The
term of the agreement begins on April 16, 2009 and runs until April 16, 2022 unless earlier terminated (i) by either party as a result of a material breach or
default under the agreement that remains uncured, (ii) as a result of bankruptcy, insolvency, reorganization, receivership or otherwise of either party, and (iii) on a
product-by-product basis if the parties are unable to agree on a purchase price for a particular product or if Nippon Kayaku reasonably determines that a product infringes or
is likely to infringe on the intellectual property of a third party.
RESEARCH AND DEVELOPMENT
Research and development expenses for the years ended December 31, 2009, 2008 and 2007 were $3.42 million,
$3.31 million and $2.34 million, respectively, or 11%, 11% and 9%, respectively, of total revenue. Research and development expenses in these periods relate primarily
to:
-
-
efforts to develop improved manufacturing processes for our currently marketed products;
-
-
research to identify and evaluate new and innovative embolotherapy products based on our platform microsphere technology,
including a smaller-sized microsphere for our HepaSphere Microsphere and QuadraSphere Microsphere product offerings;
-
-
research to identify and evaluate new applications for our products;
13
Table of Contents
-
-
efforts to develop a new generation of steerable guidewire to augment and/or replace our current guidewire product
offerings; and
-
-
further preclinical testing and nonclinical trials to support initial and/or additional clinical indications and/or
premarketing clearances for our Embosphere Microspheres, HepaSphere Microspheres, QuadraSphere Microspheres, Sequitor Steerable Guidewire and EmboCath Plus Infusion Microcatheter, all of which are
currently cleared and marketed for specified indications and in specified geographic locations.
COMPETITION
We encounter, and expect to continue to encounter, competition in the sale of our current and future embolotherapy and delivery system
products. Many of our current competitors have, and our future competitors are likely to have, greater financial, operational, sales and marketing resources and more experience in research and
development than we have. We compete primarily on the basis of product performance, ease of use, degree of targeted embolization control, and quality of patient outcome.
Embolotherapy.
The primary competitive embolotherapy product has been non-spherical polyvinyl alcohol, or PVA, particles, a
product
introduced into the market more than 20 years ago. Currently, the primary products with which our microspheres compete are spherical PVA, sold by Boston Scientific Corporation, Biocompatibles
and Terumo Corporation; Embozene sold by CeloNova
Biosciences, Inc.; gel foam, sold by Pfizer Inc.; and non-spherical (particle) PVA, sold by Boston Scientific and Cook Incorporated.
UFE.
Our principal competitors in UFE are Biocompatibles, Boston Scientific, Cook, Cordis Corporation, a Johnson &
Johnson company, Pfizer and
Terumo, as well as companies selling or developing non-embolotherapy solutions for UFE.
Within
the field of uterine artery embolization, we believe we are the market share leader and one of only three companies in the United States to have embolic products specifically
indicated for use in UFE. Based on both research and clinical studies conducted on our product for UFE, we believe we offer physicians a high degree of consistent and predictable product performance,
ease of use, targeted delivery, and durable vessel occlusion, and therefore satisfactory short- and long-term clinical outcomes validated by peer-reviewed publications, when
compared to our competitors.
UFE
competes with other treatments that are used to address symptoms related to fibroids. Endometrial ablation is a technique for addressing excessive uterine bleeding, or menorrhagia,
in women. Most endometrial ablation systems are not indicated for use in treatment of fibroids; however, obstetricians and gynecologists may use this procedure to resolve symptoms secondary to
fibroids. Robotic surgery is an additional option that offers a less invasive alternative to a full surgical hysterectomy or myomectomy. These procedures require purchase of an expensive piece of
equipment and disposables required for the procedure. Although robotic surgery generally requires a smaller incision and therefore reduced time for healing, these procedures are still a surgical
procedure requiring the surgical removal of either the tumor or entire uterus. Robotic surgery also requires extensive training and a specialized skill set.
Several
companies have announced development programs intended to offer solutions that would enable gynecologists to treat uterine fibroids in their office using high-energy
ultrasound, RF ablation, mechanical action or other energy-based techniques. No company is currently approved by the FDA to market a product in the gynecologist office market for this purpose.
14
Table of Contents
Liver Cancer.
We market and sell our HepaSphere Microspheres product for liver cancer indications in
the European Union, Brazil and Russia. Our primary competitor in Europe for the treatment of liver cancer is Biocompatibles.
Delivery Systems.
Our primary competitors in the field of delivery systems are Terumo Corporation, Cordis Corporation and Boston
Scientific
Corporation.
GOVERNMENT REGULATION
FDA Regulation.
The FDA, and other federal, state, local, and foreign authorities regulate our products and manufacturing activities.
Pursuant to the
Federal Food, Drug, and Cosmetic Act and the regulations promulgated under that act, the FDA regulates the design, development, clinical trials, testing, manufacture, packaging, labeling, storage,
distribution and promotion of medical devices. Before a new device that we develop can be introduced to the market, we must obtain market clearance through a 510(k) premarket notification or approval
through a premarket approval application. Additionally, the new device may only be introduced to the market if the manufacturer quality system complies with the Quality System Regulation (21 CFR
Part 820).
Changes in Cleared or Approved Devices.
We must obtain new FDA 510(k) clearance or premarket approval when there is a major change or
modification in
the intended use or indications for use of a legally marketed device or a change or modification of the device, including product enhancements and product line extensions of a legally marketed device,
as required by FDA regulations.
Current Good Manufacturing Practice / Quality System Regulation and Reporting.
The Federal Food, Drug, and Cosmetic Act requires us to
comply with
the Quality System Regulation pertaining to all aspects of our product design and manufacturing process, including requirements for packaging, labeling and record keeping, complaint handling,
corrective and preventive actions and internal auditing. The FDA enforces these requirements through periodic inspections of medical device manufacturers. In addition, the medical device reporting
regulation requires us to inform the FDA whenever information reasonably suggests that one of our devices may have caused or contributed to a death or serious injury, or when one of our devices has
malfunctioned, if the device would be likely to cause or contribute to a death or a serious injury in the event the malfunction were to recur. We believe that
we, and all who manufacture our delivery systems, are in compliance with applicable Quality System Regulation and medical device reporting requirements.
Labeling and Advertising.
Labeling and promotional activities are also subject to scrutiny by the FDA. Among other things, labeling
violates the law
if it is false or misleading in any respect or it fails to contain adequate directions for use. Moreover, product claims that are outside the labeling either approved or cleared by the FDA violate the
Federal Food, Drug, and Cosmetic Act.
Our
product promotion is also subject to regulation by the Federal Trade Commission under the Federal Trade Commission Act, which prohibits unfair methods of competition and unfair or
deceptive acts or practices in or affecting commerce, as well as unfair or deceptive practices such as the dissemination of any false advertisement pertaining to medical devices.
Import Requirements.
To import a device, the importer must file an entry notice and bond with the United States Customs Service pending
an FDA
decision on the product's admissibility. If the FDA refuses admission, Customs will issue a notice for redelivery. The failure to redeliver the product can result in monetary penalties. All devices
are subject to FDA examination before release from Customs. Any article that appears to be in violation of the Federal Food, Drug, and Cosmetic Act may be refused admission and a notice of detention
and hearing may be issued.
Export Requirements.
Products for export from Europe and from the United States are subject to foreign countries' import requirements
and the FDA's
or European regulating bodies' exporting
15
Table of Contents
requirements.
In addition to the import requirements of foreign countries, we must also comply with the U.S. laws governing the export of products regulated by the FDA. Foreign countries often
require, among other things, an FDA certificate for products for export, also called a Certificate for Foreign Government. To obtain this certificate from the FDA, the device manufacturer must apply
to the FDA. The FDA certifies that the product has been granted clearance or approval in the United States and that the manufacturing facilities were in compliance with Quality Systems Regulation
regulations at the time of the last FDA inspection.
Fines and Penalties for Noncompliance.
Failure to comply with applicable FDA regulatory requirements
could result in, among other things, withdrawal of market clearance or approval, injunctions, voluntary or mandatory patient/physician notifications, recalls, warning letters, product seizures, civil
penalties, fines and criminal prosecutions. Federal Trade Commission enforcement can result in orders requiring, among other things, limits on advertising, corrective advertising, consumer redress,
rescission of contracts and such other relief as may be deemed necessary.
Foreign Regulations.
Medical device laws and regulations are also in effect in many countries outside of the United States. These range
from
comprehensive device approval requirements for some or all of our medical device products to more basic requests for product data or certification. The number and scope of these requirements are
increasing. Sales of medical devices in the European Union are subject to compliance with the European Medical Device Directive. This directive contains requirements for quality system and essential
requirements with which all manufacturers must comply. In February 2006, we obtained ISO 13485:2003 Quality Management Systems Requirements for Regulatory Purposes certification at our French
facility and in April 2006 we obtained this certification at our facility in Rockland, Massachusetts.
Failure to Comply.
Failure to materially comply with applicable federal, state and foreign medical device laws and regulations would
likely have a
material adverse effect on our business. In addition, federal, state and foreign regulations regarding the manufacture and sale of medical devices are subject to future changes.
Environmental Regulations.
We are subject to various federal, state, local and foreign laws and regulations relating to the protection
of the
environment, as well as health and safety. In the course of our business, we are involved in the handling, storage and disposal of limited amounts of certain chemicals. The laws and regulations
applicable to our operations include provisions that regulate the discharge of materials into the environment. Usually these environmental laws and regulations impose "strict liability," rendering a
person liable without regard to negligence or fault on the part of such person. Such environmental laws and regulations may expose us to liability for the conduct of, or conditions caused by, others,
or for acts that were in compliance with all applicable laws at the time the acts were performed. We have not been required to expend material amounts in connection with our efforts to comply with
environmental requirements and do not believe that compliance with such requirements will have a material adverse effect upon our capital expenditures, results of operations or competitive position.
Failure to comply with applicable environmental and related laws could have a material adverse effect on our business. In addition, because the requirements imposed by such laws and regulations are
frequently changed, we are unable to predict the cost of compliance with such requirements in the future, or the effect of such laws on our capital expenditures, results of operations or competitive
position.
Anti-Kickback Statutes.
The Medicare and Medicaid Patient Protection Act of 1987, as amended, which is more commonly known as the
federal
health-care Anti-Kickback Statute, prohibits persons from, among other things, knowingly and willfully offering or paying remuneration, directly or indirectly, to a person to
induce the purchase, order, lease, or recommendation of a good or service for which payment may be made in whole or part under a federal health-care program such as Medicare or Medicaid.
The definition of remuneration has been broadly interpreted to include anything of value,
16
Table of Contents
including,
for example, gifts, discounts, the furnishing of supplies or equipment, credit arrangements, payments of cash and waivers of payments. Several courts have interpreted the statute's intended
requirement to mean that if any one purpose of an arrangement involving remuneration is to induce referrals or otherwise generate business involving goods or services reimbursed in whole or in part
under federal health-care programs, the statute has been violated. The law contains several statutory exceptions, including payments to bona fide employees, certain discounts and certain
payments to group purchasing organizations. Violations can result in significant penalties, imprisonment and exclusion from Medicare, Medicaid and other federal health-care programs.
Exclusion of a manufacturer would preclude any federal health-care program from paying for its products. In addition, some courts have held that kickback arrangements can provide the basis
for an action under the Federal False Claims Act, which is discussed in more detail below.
The
Anti-Kickback Statute is broad and potentially prohibits many arrangements and practices that are lawful in businesses outside of the health-care industry.
Recognizing that the Anti-Kickback Statute is broad and may technically prohibit many innocuous or beneficial arrangements, the Office of Inspector General of Health and Human Services, or
OIG, issued a series of regulations, known as the safe harbors, beginning in July 1991. These safe harbors set forth provisions that, if all the applicable requirements are met, will assure
health-care providers and other parties that they will not be prosecuted under the Anti-Kickback Statute. The failure of a transaction or arrangement to fit precisely within
one or more safe harbors does not necessarily mean that it is illegal or that prosecution will be pursued. However, conduct and business arrangements that do not fully satisfy each applicable safe
harbor may result in increased scrutiny by government enforcement authorities such as the OIG. Arrangements that implicate the Anti-Kickback Statute, and that do not fall within a safe
harbor, are analyzed by the OIG on a case-by-case basis.
Government
officials have focused recent enforcement efforts on, among other things, the sales and marketing activities of pharmaceutical, medical device, and other
health-care companies, and recently have brought cases against individuals or entities with personnel who allegedly offered unlawful inducements to potential or existing customers in an
attempt to procure their business. Settlements of these cases by health-care companies have involved significant fines and/or penalties and in some instances criminal pleas.
In
addition to the Federal Anti-Kickback Statute, many states have their own anti-kickback laws. Often, these laws closely follow the language of the federal law,
although they do not always have the same exceptions or safe harbors. In some states, these anti-kickback laws apply with respect to all payors, including commercial health insurance
companies.
False Claims Laws.
Federal false claims laws prohibit any person from knowingly presenting, or causing to be presented, a false claim
for payment to
the federal government or knowingly making, or causing to be made, a false statement to get a false claim paid. Manufacturers can be held liable under false claims laws, even if they do not submit
claims to the government, if they are found to have caused submission of false claims. The Federal Civil False Claims Act also includes whistle blower provisions that allow private citizens to bring
suit against an entity or individual on behalf of the United States and to recover a portion of any monetary recovery. Many of the recent highly publicized settlements in the health-care
industry relating to sales and marketing practices have been cases brought under the False Claims Act. The majority of states also have statutes or regulations similar to the federal false claims
laws, which apply to items and services reimbursed under Medicaid and other state programs, or, in several states, apply regardless of the payor. Sanctions under these federal and state laws may
include civil monetary penalties, exclusion of a manufacturer's products from reimbursement under government programs, criminal fines and imprisonment.
Privacy and Security.
The Health Insurance Portability and Accountability Act of 1996, or HIPAA, and the rules promulgated thereunder
require certain
entities, referred to as covered entities, to comply
17
Table of Contents
with
established standards, including standards regarding the privacy and security of protected health information, or PHI. HIPAA further requires that covered entities enter into agreements meeting
certain regulatory requirements with their business associates, as such term is defined by HIPAA, which, among other things, obligate the business associates to safeguard the covered entity's PHI
against improper use and disclosure. While not directly regulated by HIPAA, a business associate may face significant contractual liability pursuant to such an agreement if the business associate
breaches the agreement or causes the covered entity to fail to comply with HIPAA. In the course of our business operations, we have entered into several business associate agreements with certain of
our customers that are covered entities. Pursuant to the terms of these business associate agreements, we have agreed, among other things, not to use or further disclose the covered entity's PHI
except as permitted or required by the agreements or as required by law, to use reasonable safeguards to prevent prohibited disclosure of such PHI and to report to the covered entity any unauthorized
uses or disclosures of such PHI. Accordingly, we incur compliance-related costs in meeting HIPAA-related obligations under business associates agreements to which we are a party. Moreover, if we fail
to meet our contractual obligations under such agreements, we may incur significant liability.
In
addition, HIPAA's criminal provisions potentially could be applied to a non-covered entity that aided and abetted the violation of, or conspired to violate, HIPAA,
although we are unable at this time to determine conclusively whether our actions could be subject to prosecution in the event of an impermissible disclosure of health information to us. Also, many
state laws regulate the use and disclosure of health information, and are not necessarily preempted by HIPAA, in particular those laws that afford greater protection to the individual than does HIPAA.
Finally, in the event we change our business model and become a HIPAA-covered entity, we would be directly subject to HIPAA, its rules and its civil and criminal penalties.
PROPRIETARY TECHNOLOGY AND PATENT RIGHTS
We seek to establish and protect our proprietary technologies and products through a combination of patents, copyrights, trademarks and
trade secrets, as well as by entering into licensing agreements and utilizing confidentiality agreements or provisions where appropriate. We have implemented a patent strategy designed to maximize our
intellectual property rights. We are pursuing patent rights in the United States and foreign countries to protect the technology, inventions and improvements that we consider critical to the
development of our products and business.
In
1998, we entered into an agreement with L'Assistance Publique-Hôpitaux de Paris, referred to as AP-HP, pursuant to which AP-HP
has granted us the exclusive license to two United States patents and their foreign counterparts that we jointly own with AP-HP relating to Embosphere Microspheres. We are required to pay
to AP-HP a royalty on the commercial sale of any products that incorporate technology covered by the patents. We may sublicense these exclusive rights under the agreement only with the
prior written consent of AP-HP, which consent cannot be unreasonably withheld. Effective March 2, 2009, we and AP-HP amended our agreement such that our exclusive
license was extended for the duration of both (i) the jointly owned U.S. and foreign counterpart patents which will expire in 2014 and 2012, respectively, and (ii) the products and
specialties implementing the patents. The agreement can be terminated on three months' notice by either party if the other party does not perform one or more of its obligations under the agreement and
fails to cure its nonperformance during the notice period.
We
have a number of United States and foreign patents and pending applications related to our microsphere technologies and uses thereof. For example, we have at least six U.S. and twelve
foreign patents, and four U.S. and four foreign counterpart pending applications related to microspheres and uses thereof for tissue bulking, tissue construction, dermal augmentation, and the
treatment of gastroesophageal reflux disease, or GERD, and urinary incontinence that expire at various dates between 2019 and 2020. The U.S. and foreign counterpart patents expire at various dates
between 2019
18
Table of Contents
and
2020. We also have eleven issued foreign patents and at least four U.S. and fourteen foreign counterpart pending applications related to microspheres and uses thereof for drug delivery and gene
therapy that expire at various dates between 2019 and 2020. Additionally, we have at least three patents in the U.S. and six foreign patents, as well as at least three U.S. and four foreign
counterpart pending applications, related to PVA microspheres that expire in 2019. Other U.S. and foreign counterpart patent applications have also issued or are currently pending. The subjects of
these patents and applications include new materials for embolization, new methods of using our materials for embolization and other applications, as well as new uses of our materials outside of
embolization.
The
term of individual patents depends upon the legal term of the patents in the countries in which they are obtained. In most countries in which we file, the patent term is
20 years from the earliest date of filing a non-provisional patent application. In the United States, a patent's term may be lengthened by patent term adjustment, which compensates
a patentee for administrative delays by the U.S. Patent and Trademark Office in granting a patent, or may be shortened if a patent is terminally disclaimed over another patent.
The
patent term of a patent that covers an FDA-approved product may also be eligible for patent term extension, which permits patent term restoration as compensation for the
patent term lost during the FDA regulatory review process. The Drug Price Competition and Patent Term Restoration Act of 1984, or the Hatch-Waxman Act, permits a patent term extension of up to five
years beyond the expiration of the patent. The length of the patent term extension is related to the length of time the drug is under regulatory review. Patent extension cannot extend the remaining
term of a patent beyond a total of 14 years from the date of product approval and only one patent applicable to an approved product may be extended. Similar provisions are available in Europe
and other foreign jurisdictions to extend the term of a patent that covers an approved product.
We
currently own the following U.S. trademarks:
-
-
ask4UFE.com®
-
-
Ask4Tell4
-
-
BioSphere Medical®
-
-
Embosphere®
-
-
EmboCath® Plus
-
-
EmboGold®
-
-
HepaSphere
-
-
PassThru®
-
-
QuadraSphere®
-
-
Tenor
-
-
Segway®
-
-
Sequitor®
19
Table of Contents
Our success depends to a significant degree upon our ability to develop proprietary products and technologies and to obtain patent coverage for these products and
technologies. We intend to continue to file patent applications covering any newly developed products and technologies. However, as discussed above, there can be no guarantee that any of our pending
or future filed applications will issue as patents. There can be no guarantee that the United States Patent and Trademark Office or some third party will not initiate an interference proceeding
involving any of our pending U.S. applications or U.S. patents, or that a third party will not oppose any granted patent in Europe. There can be no guarantee that a third party will not file an
opposition or comparable proceeding against any of our foreign patents or pending patent applications. Finally, there can be no guarantee that our issued patents or future issued patents, if any, will
provide adequate protection from competition.
Patents
provide some degree of protection for our proprietary technology. However, the pursuit and assertion of patent rights, particularly in areas like medical device development,
involve complex legal and factual determinations and, therefore, are characterized by significant uncertainty. Specifically, enforcement or defense of our patents against potential or actual
third-party infringers may impose a significant burden on our financial and human resources, and we may be limited in our ability to protect all of our rights. If we enforce our patents against third
parties, they may challenge the validity or enforceability of our patents. We cannot predict whether we will be successful in enforcing our patents or defending their validity or enforceability.
In
addition, the laws governing patent issuance and the scope of patent coverage continue to evolve, particularly in the life sciences, and the patent rights we possess, or are pursuing,
generally cover our
technologies to varying degrees. As a result, we cannot ensure that patents will issue from any of our patent applications or from applications licensed to us, or that any of our issued patents will
offer meaningful protection. In addition, our issued patents or patents licensed to us may be successfully challenged, invalidated, circumvented or rendered unenforceable so that our patent rights may
not create an effective competitive barrier. Moreover, the laws of some foreign countries may not protect our proprietary rights to the same extent as do the laws of the United States. There can be no
assurance that any patents issued to us will provide a legal basis for establishing an exclusive market for our products or provide us with any competitive advantages, or that the patents of others
will not have an adverse effect on our ability to do business or to continue to use our technologies freely. In view of these factors, the value of our intellectual property position is uncertain.
We
have a European Patent, EP 1128816, related to certain PVA microspheres useful for embolization and methods thereof. We have validated this European patent in Germany, Spain, France,
United Kingdom and Italy. On January 13, 2005, we were notified of a Notice of Opposition filed in the European Patent Office, or EPO, by Biocompatibles UK Limited on December 23, 2004,
challenging the patentability of the claims in this European patent. We filed a response to the Notice of Opposition in August 2005. Biocompatibles UK Limited subsequently filed a response in 2006. On
December 10, 2007, the European Patent Office upheld the claims of our patent in amended form and rendered its formal written decision on December 27, 2007. We and Biocompatibles have
appealed this decision. The EPO has not set a date, but we expect oral proceedings to be scheduled within the next twelve months. We intend to continue defending our European PVA patent in this
appeal. While we are not able to predict the outcome of this proceeding, it will not impact our ability to sell our Embosphere Microsphere or HepaSphere Microsphere products in Europe.
We
have a European Patent, EP 1267839, which relates to certain drug-loaded microspheres and their use in embolization. We have validated this European Patent in Austria,
Belgium, Germany, Spain, France, United Kingdom, Greece, Italy, Luxembourg and the Netherlands. On July 1, 2008, Biocompatibles UK Limited filed a Notice of Opposition in the EPO challenging
the patentability of the claims in this European Patent. We filed a reply to Notice of Opposition on March 19, 2009. Oral Proceedings are scheduled for September 23, 2010. We intend to
continue to defend our European
20
Table of Contents
patent
and will file a timely response. We are not able to predict the outcome of this opposition proceeding.
We
may be subject to third parties filing claims asserting that our technologies or products infringe on their intellectual property. We cannot predict whether third parties will assert
such claims against us or our licensees or against the licensors of technology licensed to us, or whether those claims will harm our business. If we are forced to defend against such claims,
regardless of their merit or whether they are resolved in favor of or against us, our licensees or our licensors, we may face costly litigation and diversion of management's attention and resources.
As a result of such disputes, we may have to develop, at a substantial cost, non infringing technology, or enter into licensing agreements. These agreements, if necessary, may be unavailable on terms
acceptable to us, or at all, which could seriously harm our business or financial condition.
We
also rely in part on trade secret protection of our intellectual property. We attempt to protect our trade secrets by entering into confidentiality agreements with third parties,
employees and consultants. Our employees also sign agreements assigning to us their interests in inventions and original expressions and any corresponding patents and copyrights arising from their
work for us. However, it is possible that these agreements may be breached, invalidated or rendered unenforceable, and, if so, our trade secrets could be disclosed to others, including our
competitors, and there may not be an adequate corrective remedy available. Despite the measures we have taken to protect our intellectual property, parties to our agreements may breach the
confidentiality provisions in our contracts or infringe or misappropriate our patents, copyrights, trademarks, trade secrets and other proprietary rights. In addition, third parties may independently
discover or invent competitive technologies, or reverse engineer our trade secrets or other technology. Therefore, the measures we are taking to protect our proprietary technology may not be adequate.
SEGMENT INFORMATION
We develop microspheres and other ancillary embolotherapy products for use in the treatment of hypervascularized tumors, including
uterine fibroids and arteriovenous malformations. We operate exclusively in the embolotherapy product business, which we consider as one business segment. Further segment information can be found in
Note 10 of the notes to our consolidated financial statements, included elsewhere in this annual report on Form 10-K.
EMPLOYEES
As of December 31, 2009, we had approximately 88 employees. Of these employees, 8 are primarily engaged in research, development
and clinical activities, 27 are engaged in manufacturing, 42 are engaged in sales and marketing, and the remainder are engaged in finance and administration. Of these 88 employees, 54 are
located in the United States and 34 are located in France.
Our
employees in the United States are not covered by a collective bargaining agreement. In Europe, our employees are covered by the provisions of an agreement setting forth national
guidelines and standards for labor relations within our industry. We consider our relations with our employees to be good.
21
Table of Contents
ITEM 1A. RISK FACTORS
Investing in our common stock involves a high degree of risk. The risks described below are not the only ones
facing our company. Additional risks not presently known to us or that we deem immaterial may also impair our business operations. Any of the following risks could materially adversely affect our
business, operating results and financial condition and could result in a complete loss of your investment.
Risks Relating to Our Future Profitability, Our Financial Results and Need For Financing
Because we have a history of losses and our future profitability is uncertain, our common stock is a speculative investment.
We have incurred operating losses since our inception and, as of December 31, 2009, had an accumulated deficit of approximately
$93.38 million. We expect to spend substantial funds to continue research and product testing, to maintain sales, to perform clinical trials, for marketing, quality control, regulatory,
manufacturing and administrative capabilities and for other general corporate purposes. We expect to continue to incur operating losses in 2010 as we seek to execute on our business plan, including
continuing to establish sales and marketing capabilities and conducting research and development activities.
We
may never become profitable. If we do become profitable, we may not remain profitable on a continuing basis. Our failure to become and remain profitable could depress the market price
of our common stock and impair our ability to raise capital and expand, diversify or continue our operations.
We will continue to need additional funds, and if additional capital is not available, we may have to limit or scale back our operations.
We believe that our existing cash and other working capital, together with anticipated proceeds from sales of our products, will be
sufficient to fund our currently planned operating and capital requirements through at least the next twelve months.
Our
currently planned operating and capital requirements primarily include the need for working capital to:
-
-
produce and manufacture our products;
-
-
support our sales and marketing efforts for our Embosphere Microsphere products for UFE and other indications, as well as
our other products for sale;
-
-
support our QuadraSphere Microspheres clinical trial, if we commence such trial;
-
-
support our ongoing research and development activities; and
-
-
fund our general and administrative costs and expenses.
However,
our cash requirements may vary materially from those now planned due to a number of factors, including, without limitation:
-
-
unanticipated changes in the amount of revenue we generate from sales of our products, in particular from sales of our
Embosphere Microspheres for UFE;
-
-
an adverse judgment in a product liability lawsuit which could materially adversely affect market acceptance of our
products, and, if not covered by our product liability insurance, could have a material adverse effect on our liquidity;
-
-
unplanned costs associated with our QuadraSphere Microspheres clinical trial, if we commence such trial;
22
Table of Contents
-
-
costs resulting from changes in our research and development, regulatory and marketing strategies;
-
-
competitive advances that make it harder for us to market and sell our products;
-
-
the timing and cost of regulatory approvals and clearances; and
-
-
adverse global market and economic conditions.
We
may also need additional funds for possible strategic acquisitions of synergistic businesses, products and/or technologies.
We
will require substantial additional cash to fund our planned, and any unplanned, expenses. If adequate funds are not available, we could be required to reduce our capital
expenditures, scale back or eliminate some or all of our research, development, sales and marketing initiatives, reduce our workforce, and license to others or divest products or technologies that we
otherwise would seek to commercialize ourselves. We may seek additional funding through a combination of collaborative arrangements, debt financing or the sale of additional equity securities. We may
not receive such additional funding on reasonable terms, or at all. Any sales of equity or debt securities are likely to dilute the ownership of our existing stockholders, and the new securities may
have rights, preferences or privileges senior to those of existing holders of our capital stock. Debt financing, if available, may involve agreements that include covenants limiting or restricting our
ability to take specific actions such as incurring additional debt, making capital expenditures or declaring dividends. If we raise additional funds through collaboration and licensing arrangements
with third parties, we may have to relinquish valuable rights to our technologies or products, or grant licenses on terms that are not favorable to us.
If our operating results fluctuate significantly from quarter to quarter, then our stock price may decline.
Our operating results could fluctuate significantly from quarter to quarter. These fluctuations may be due to a number of factors,
including:
-
-
inflation and adverse global economic conditions, which may affect the rate of UFE procedures and the sales of our
products;
-
-
the timing and volume of customer orders for our products;
-
-
introduction or announcement of competitive products;
-
-
regulatory approvals or clearances;
-
-
product recalls;
-
-
product liability claims against our products, including any adverse judgments;
-
-
turnover in our direct sales force;
-
-
the timing and amount of expenses;
-
-
timing of orders by our distributors;
-
-
the effectiveness of new marketing and sales programs;
-
-
exchange rate fluctuations; and
-
-
liquidity constraints and losses in our invested cash due to the current adverse conditions in the global capital markets.
In
addition, a large portion of our expenses, including expenses for facilities, equipment and personnel, are relatively fixed. Accordingly, if our revenue declines or does not grow as
much as we anticipate, we might not be able to improve our operating margins. Failure to achieve anticipated levels
23
Table of Contents
of
revenue could significantly harm our operating results for a particular fiscal period. Due to these fluctuations, our operating results in some quarters may not meet the expectations of our
investors and our stock price may decline as a result.
Unstable market and economic conditions may have serious adverse consequences on our business.
As widely reported, global credit and financial markets have been experiencing extreme disruptions in the past year, including severely
diminished liquidity and credit availability, declines in consumer confidence, declines in economic growth, increases in unemployment rates, and uncertainty about economic stability. There can be no
assurance that further deterioration in credit and financial markets and confidence in economic conditions will not occur. Our general business strategy may be adversely affected by the recent
economic downturn and volatile business environment and continued unpredictable and unstable market conditions. The global economic crisis could adversely affect sales of our products. For example,
worldwide product revenue from sales of our microspheres for use in interventional gynecology for UFE procedures declined in part due to current economic conditions, including the high rate of
unemployment, which we believe reduced the demand for elective procedures and the use of our products. We may experience declines in revenue in 2010 and beyond as a result of these factors. Also, if
the current equity and credit markets deteriorate further, or do not improve, it may make any necessary debt or equity financing more difficult, more costly, and more dilutive. Failure to secure any
necessary financing in a timely manner and on favorable terms could have a material adverse effect on our growth strategy, financial performance and stock price and could require us to delay or
abandon clinical development plans. In addition, there is a risk that one or more of our current service providers, manufacturers and other partners may not survive these difficult economic times,
which would directly affect our ability to attain our operating goals.
At
December 31, 2009, we had $18.09 million of cash, cash equivalents and marketable securities consisting of corporate, bank, federal agency, mortgage-backed and
government obligations. We are not aware of any downgrades, material losses, or other significant deterioration in the fair value of our cash equivalents or marketable securities since
December 31, 2009, but no assurance can be given that further deterioration in conditions of the global credit and financial markets would not negatively impact our current portfolio of cash
equivalents and marketable securities or our ability to meet our financing objectives. Further dislocations in the credit market may adversely impact the value and/or liquidity of marketable
securities owned by us.
There
is also a possibility that our stock price may decline because of the volatility of the stock market and the general economic downturn.
Compliance with changing regulation of corporate governance and public disclosure, as well as potential new accounting pronouncements, could impact our future financial
position and results of operations.
Changing laws, regulations and standards relating to corporate governance and public disclosure, including SEC regulations and NASDAQ
Global Market rules, could result in continuing uncertainty regarding compliance matters and higher costs necessitated by ongoing revisions to disclosure and governance practices. In addition, future
changes in financial accounting standards may cause adverse, unexpected revenue fluctuations and affect our financial position or results of operations. New accounting pronouncements and varying
interpretations of pronouncements have occurred with frequency in the past and may occur again in the future, and as a result we may be required to make changes in our accounting policies.
Our
efforts to comply with evolving laws, regulations and standards have resulted in, and are likely to continue to result in, increased general and administrative expenses and
management time related to compliance activities. We expect these efforts to require the continued commitment of significant resources. If our efforts to comply with new or changed laws, regulations
and standards differ from the
24
Table of Contents
activities
intended by regulatory or governing bodies due to ambiguities related to practice, our reputation might be harmed and we might be subject to sanctions or investigation by regulatory
authorities, such as the SEC. Any such action could adversely affect our financial results and tour stock price.
Failure to maintain effective internal controls in accordance with section 404 of the Sarbanes-Oxley Act could have a material adverse effect on our business and
stock price.
Section 404 of the Sarbanes-Oxley Act of 2002 requires management's annual review and evaluation of our internal controls, and
will require attestation of the effectiveness of our internal controls by our independent registered public accounting firm beginning with the fiscal year ended December 31, 2010. This process
could require us to implement significant measures to improve our internal controls, may require us to hire additional personnel and outside advisory services, and will result in significant
accounting and legal expenses. Any failure by us to maintain effective internal controls could have a material adverse effect on our business, operating results and stock price.
Changes to our performance in each jurisdiction in which we operate, resulting from either changes in our business or as a result of routine tax audits, could materially
impact our deferred tax assets or could materially impact our future financial position or results of operations.
We use the asset and liability accounting method whereby deferred tax assets and liabilities are recognized based on temporary
differences between the financial statement carrying amounts and tax bases of assets and liabilities using current statutory tax rates in each tax jurisdiction in which we operate. A valuation
allowance against net deferred tax assets is recorded if, based on the available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized. Due to the size
of our net operating loss carryforward in relation to our history of unprofitable operations, we have not recognized any of our net deferred tax assets. However, future improvements in operational
performance in any tax jurisdiction in which we operate, while not guaranteed, could result in increased certainty of our ability to apply deferred tax assets against taxable income, which could, in
turn, result in a significant impact on the value of our deferred tax assets and reported operating results.
Risks Relating to Our Industry, Business and Strategy
A significant portion of our revenue is derived from sales of our Embosphere Microspheres for UFE, and if we do not successfully commercialize and achieve widespread market
acceptance of our Embosphere Microspheres for UFE, our business will be materially harmed and our stock price will decline.
The majority of our revenue for the year ended December 31, 2009 was derived from the sale of Embosphere Microspheres for use in
UFE. Our principal business focus is to grow our embolotherapy business through increases in the utilization rate for UFE procedures versus other procedures to treat uterine fibroids and in the
employment by medical providers of our Embosphere Microspheres in such procedures in lieu of competing products. We began marketing and selling Embosphere Microspheres for UFE in 2002, but to date we
have not achieved widespread market acceptance of UFE as an alternative to other procedures, including hysterectomy. Our ability to grow our product revenue is substantially dependent upon growth in
UFE procedures and our ability to achieve widespread acceptance of the use of Embosphere Microspheres for use in UFE procedures. If growth in UFE procedures does not occur; and if we do not achieve
such market acceptance, our product revenue and our prospects for profitability and success will be materially adversely affected.
25
Table of Contents
We face a number of significant risks relating to our ability to successfully commercialize Embosphere Microspheres for use in UFE, including risks relating
to:
-
-
our ability to successfully market and sell Embosphere Microspheres for use in UFE with our limited sales force;
-
-
the success of our sales and marketing strategies for Embosphere Microspheres for use in UFE, including, but not limited
to, our ask4UFE and consumer health talk, or CHT, campaigns and other public relations campaigns, in which we are seeking to increase awareness among patients, referring physicians, interventional
radiologists and third-party payors of UFE as an alternative treatment for fibroids;
-
-
the unknown future impact that Health Care Reform and other measures may have on our ability to educate patients about
fibroids and treatment options on behalf of or in partnership with hospitals;
-
-
our ability to recruit and train our sales force and the effectiveness of our sales force, in influencing referral
behavior with gynecologists and other health-care providers;
-
-
reimbursement treatment from government and third-party insurers for our products;
-
-
longstanding use of established treatment options for uterine fibroids and/or the emergence of new treatment options;
-
-
our ability to gain market acceptance of UFE using Embosphere Microspheres as a safe, effective and medically necessary
treatment for uterine fibroids;
-
-
the availability of substantial amounts of cash to fund our commercialization plans;
-
-
competitive factors;
-
-
our ability to effectively develop adequate marketing, manufacturing, and distribution capabilities;
-
-
our ability to maintain the necessary patent protection and regulatory approvals required to market and sell Embosphere
Microspheres for UFE;
-
-
unemployment levels and adverse economic conditions, which may cause a decrease in UFE procedure rates and sales of our
products; and
-
-
the various other factors discussed in detail throughout this section titled "Risk Factors."
If the market concludes that our products are not safe or effective, we will not achieve widespread market acceptance of our microsphere products, and our business prospects
will be seriously harmed.
In the United States, we began selling our first microsphere product in the first half of 2000. In November 2002, we received FDA
clearance to market our Embosphere Microspheres in the United States for UFE procedures. We began to market and sell our HepaSphere Microspheres in the European Union in the fourth quarter of 2005 and
received marketing clearance from the FDA for our QuadraSphere Microspheres in November 2006. Our success will depend upon increasing acceptance by the medical community, patients and third-party
payors that our Embosphere Microspheres and other products are medically therapeutic and cost-effective. Our products may not gain widespread market acceptance for a variety of reasons,
including:
-
-
Our microspheres are designed to occlude targeted blood vessels permanently. There is some risk that some or all of the
microspheres used in a medical procedure may travel in the blood system to sites other than the intended treatment site and occlude, or block, other blood vessels,
26
Table of Contents
In
March 2006, we instituted a voluntary recall of our HepaSphere Microspheres in Europe to correct a packaging defect that we identified while conducting aging studies. HepaSphere
Microspheres are contained in a prefilled vial that was in turn initially packaged inside a paper pouch. In the third quarter of 2006, we launched a new plastic packaging configuration for our
HepaSphere MicroSphere product designed to correct this defect. Although we are not aware of any adverse events resulting
from the defects in the paper packaging, our voluntary recall of this product, or any future recall, voluntary or mandatory, of any of our products, could result in reputational harm or a perception
that the recalled product is not safe, either of which could adversely affect market acceptance of our products and result in decreased sales.
Other
factors could also affect market acceptance of our products, including, without limitation, the introduction of competing products, safety concerns with similar products marketed
by others, ineffective sales, marketing and distribution support and significant warranty claims.
27
Table of Contents
If gynecologists, obstetricians, interventional radiologists and other health-care providers do not recommend and endorse our products, and if
health-care providers do not make the necessary referrals to interventional radiologists who administer our embolotherapy products, our sales may decline or we may be unable to increase
our sales and profits.
Our ability to establish and maintain favorable relationships with gynecologists, obstetricians, interventional radiologists and other
health-care providers is critical to our continued growth. We believe that the success of these relationships is, and will be, based on, among other things, the quality of our products,
such providers' perceptions concerning our commitment to embolotherapy treatments, our marketing efforts and our presence at medical society and trade association meetings. Any actual or perceived
diminution in our reputation or the quality of our products, or our failure or inability to maintain these or other efforts, could damage our current relationships or prevent us from forming new
relationships with health-care professionals and cause our growth to be limited and our business to be harmed.
In
order for us to sell our products, health-care professionals must recommend and endorse them. For example, our embolotherapy techniques are administered by interventional
radiologists. In the treatment of uterine fibroids, we believe that the UFE procedure utilizing our Embosphere Microspheres has not yet achieved widespread acceptance primarily because obstetrics and
gynecology physicians may elect to offer and provide other forms of treatment to their patients with uterine fibroids that do not require a referral to another specialist, such as an interventional
radiologist. The majority of our revenue is from the sale of our Embosphere Microspheres for UFE and, accordingly, our future success will depend upon obstetrics and gynecology physicians referring
patients to interventional radiologists to receive treatment using our Embosphere Microspheres in lieu of, or in addition to, receiving other forms of treatment that the obstetrics and gynecology
physicians can otherwise provide directly. We have not achieved widespread market acceptance for UFE as an alternative to other forms of treatment. Acceptance of UFE as a procedure, and our ability to
obtain the necessary endorsements and referrals, depend on educating the medical community as to the distinctive characteristics, perceived benefits, safety, clinical efficacy and
cost-effectiveness of our products compared to traditional methods of treatment and the
products of our competitors, and on training health-care professionals in the proper application of our products. If we are not successful in obtaining the recommendations or endorsements
of gynecologists, obstetricians, interventional radiologists and other health-care professionals for our products, our sales may decline or we may be unable to increase our sales and
profits.
Product
liability claims could create a perception that our products are unsafe. For example, we were named as a defendant in two product liability lawsuits in which the plaintiffs
claimed that they were harmed as a result of the use of our microspheres or the negligence of the health-care providers or both factors combined.
If we experience delays, difficulties or unanticipated costs in establishing and growing the sales, distribution and marketing capabilities necessary to successfully
commercialize our products, we will have difficulty maintaining and seeking to increase our sales.
We continue to develop sales, distribution and marketing capabilities primarily in the United States, the European Union, Asia and
South America to promote UFE awareness and the benefits of our product for the treatment of uterine fibroids. It has been, and we expect it will continue to be, expensive and
time-consuming for us to seek to develop a global sales and marketing force. At December 31, 2009, we had a sales and marketing force of 42 persons located principally in the United
States. Competition for skilled salespersons in the medical device industry is intense, and we may not be able to provide adequate incentives to maintain our sales and marketing force or to attract
new sales and marketing personnel to promote our products. We have only limited sales and marketing
28
Table of Contents
experience
in the United States and internationally and may not be successful in developing and implementing our strategy. Among other things, we need to:
-
-
provide or ensure that our distribution channels provide the technical and educational support customers need to use our
products successfully;
-
-
establish and implement successful sales and marketing and education programs that encourage our customers to purchase our
products;
-
-
manage geographically dispersed markets; and
-
-
modify our products and marketing and sales programs for foreign markets.
We
currently have distribution agreements with a number of third-party distributors, and we may choose or find it necessary to enter into additional third-party agreements to sell,
distribute or market our products in the future. Any third party with whom we have established a sales, distribution and/or marketing relationship may not devote sufficient time to the marketing and
sales of our products, thereby adversely affecting our planned revenue and exposing us to potential expenses in terminating such distribution agreements. We and any of our third-party collaborators
must also market our products in compliance with federal, state and local laws relating to the provision of incentives and inducements. Violation of these laws can result in substantial penalties. If
we are unable to successfully motivate and expand our marketing and sales force and further develop our sales and marketing capabilities, or if our distributors fail to promote our products, we will
have difficulty maintaining and increasing our sales, we may not achieve profitability and our stock price could decline.
We will be required to expend significant resources for research, development, testing and regulatory approval or clearance of our products under development, and these
products may not be developed successfully.
We are developing and commercializing products for medical applications using embolotherapy techniques, including, without limitation,
a smaller-sized version of our HepaSphere Microsphere and QuadraSphere Microsphere, which are still in preclinical development. Our products under development may not provide greater benefits than
current treatments or products, or alternative treatments or products under development.
All
of our products under development will require significant additional research, development, engineering and preclinical and/or clinical testing, as well as regulatory approval or
clearance and a commitment of significant additional resources prior to their commercialization. For example, FDA regulations require that we conduct clinical trials and submit a marketing application
which includes positive data from clinical trials to the FDA in order to obtain the approvals and clearances required to promote QuadraSphere Microspheres for the treatment of a specific disease or
condition, including primary and metastatic liver cancer. In October 2009, we submitted to the FDA an IDE application to commence a clinical trial to compare the effectiveness of our QuadraSphere
Microspheres combined with the chemotherapeutic agent doxorubicin against conventional transarterial chemoembolization with doxorubicin in patients with primary liver cancer. The FDA has advised us
that our study protocol will need to include survival as a primary endpoint for the trial, rather than overall tumor response rate at
six months, which was the primary endpoint that we proposed in our initial IDE application. Our satisfactory resolution of the FDA's comments on the IDE is a condition to starting the clinical trial.
We are currently evaluating the FDA's protocol requirements for the trial, including how the primary endpoint requirements will affect our plans regarding the size of the trial and the timeline and
cost for completion. We have not reached a conclusion about whether or when to undertake the clinical trial and if we determine to not undertake the trial, or if we undertake the trial and the results
are not sufficient to obtain FDA approval, then we will not be able to promote our QuadraSphere Microspheres for liver cancer indications. Our potential products may not:
-
-
be developed successfully;
29
Table of Contents
-
-
be proven safe and effective in clinical trials;
-
-
offer therapeutic or other improvements over current treatments and products;
-
-
meet applicable regulatory standards or receive regulatory approvals or clearances;
-
-
be capable of production in commercial quantities at acceptable costs and in compliance with regulatory requirements; or
-
-
be successfully marketed.
If we do not develop and introduce new products, our business may not grow and our future prospects may be adversely affected.
In order to grow our revenue in future periods we need to develop and introduce new applications for our embolotherapy technology and
pursue opportunities for microsphere technology in other medical applications. Any such new application for our embolotherapy technology or microsphere technology will be subject to a number of risks
inherent in the development and commercialization of a medical device product, including uncertainties with respect to the successful completion of clinical trials, our ability to achieve and
maintain, and our willingness to seek, required regulatory approvals or clearances and our ability to successfully commercialize, market and sell these new applications, if FDA approval or clearance
is achieved. If, as a result of these or other risks, we are not successful in developing new applications and products, our position in, and share of, the markets in which we participate, and our
business, financial condition, results of operations and prospects may be adversely affected.
We have been subject to product liability claims in the past and may be subject to additional claims in the future, we may incur substantial costs and expenses in defending
such claims, and if we are unable to obtain or maintain adequate product liability insurance, we may have to pay significant monetary damages in a successful product liability claim against us.
The development and sale of medical devices entails an inherent risk of product liability. For example, if physicians do not use our
products properly, if patients experience adverse side effects in procedures in which our products are used, or if patients, health-care providers or other constituencies conclude that any
of our products are not safe or effective for any reason, we may be exposed to product liability claims. Any such product liability claims may include allegations of defects in manufacturing, defects
in design, a failure to warn of dangers inherent in the product, negligence, strict liability, and a breach of warranties. Claims could also be asserted under state consumer protection acts. In 2005
and 2008, we were named as a defendant in two such product liability lawsuits in which the plaintiffs alleged, among other things, that they were harmed by the use of our microsphere products, the
negligence of the health-care providers or both of these factors combined. Although these lawsuits settled within the limits of our product liability insurance, we are subject to the risk
of additional product liability lawsuits, and our business, financial condition, results of operations and future prospects are subject to a number of significant risks relating to any such lawsuits,
including the following:
-
-
Claims asserting medical product liability have in the past resulted in multiple-million-dollar damage awards for
plaintiffs against various manufacturers of drugs and medical devices. Although we currently maintain product liability insurance coverage, if a plaintiff in a product liability lawsuit brought
against us were to prevail in his or her claims against us and was awarded substantial damages, our insurance, which is subject to a $5.00 million cap on the maximum amount our insurer is
required to pay for all claims within any one-year period and which is eroded by the costs of defense, may not provide us with adequate coverage for a judgment against us. If we are forced
to satisfy a judgment in excess of our product liability
30
Table of Contents
coverage,
we may not have sufficient cash to pay such judgment. There can be no assurance that, if required, we would be able to raise the additional funds required to satisfy such judgment on
favorable terms, or at all. In such case, we may be required to curtail our operations, which could have a material adverse effect on our financial condition, results of operations, the viability of
our business and future prospects, and would likely cause our stock price to decline.
-
-
Although we maintain product liability insurance, any claim that may be brought against us could result in court judgments
or settlements that are not covered, in whole or in part, by our insurance. For example, our current product liability insurance policy contains an exclusion for punitive damages, which are typically
sought in product liability lawsuits. Our insurance policies also have various other exclusions, and we may be subject to a product liability claim for which we have no coverage. We will have to pay
any amounts awarded by a court or negotiated in a settlement that exceed our coverage limitations or that are not covered by our insurance, and, in such case, we could be required to make a
substantial payment for which we may not have sufficient cash. There can be no assurance that, if required, we would be able to raise the additional funds required to make such payment on favorable
terms, or at all. In such case, we may be required to curtail our operations, which could have a material adverse effect on our financial condition, results of operations, the viability of our
business and our future prospects, and would likely cause our stock price to decline.
-
-
Any product liability claim brought against us, regardless of whether it has merit, could result in an increase in our
product liability insurance rates or our inability to secure additional insurance coverage in the future.
-
-
Defending litigation can be time consuming and can divert our management's attention from other priorities, including the
execution of business plans and strategies that are important to our ability to grow our business.
-
-
Our reputation with patients and health-care providers, including the referring gynecologists, oncologists and
interventional radiologists, who are key to our current sales and marketing strategies, could be harmed because we have been named as a defendant in product liability lawsuits in the past, and could
also be harmed if we are subject to any such claims in the future. Any reputational harm could adversely affect our ability to execute on our current sales and marketing strategies and, ultimately, on
the sales of our products, and our stock price would likely decline.
-
-
If, as a result of past or future product liability litigation, the market perceives that our products are unsafe, we
could be unsuccessful in our efforts to gain market acceptance of our products and experience a decline in our revenue, which could adversely affect our financial condition, results of operations and
the viability of our business, and cause our stock price to decline as a result.
-
-
In the prior lawsuits in which we were named as a party, the plaintiffs alleged that our microspheres were defective and
that the manner in which the applicable product was marketed was insufficient. As is often the case when product liability lawsuits arise that assert claims of defects in the manufacturing and design
of a medical device or of a failure to warn of risks inherent to such product, the FDA and comparable regulatory agencies outside of the U.S. could engage in a further review of the safety of these
products and their approved conditions for use. On the basis of that review, the FDA or such other regulatory agency could decide to impose additional requirements regarding the manufacturing,
marketing or promotion of these products, require changes to the labeling of these products, recall these products, or commence proceedings to withdraw its clearance of the products, any of which
could harm our reputation, adversely affect market acceptance of these products or cause a decline in revenue from the sale
31
Table of Contents
of
the applicable product, which could adversely affect our financial condition, results of operations, the viability of our business and our future prospects, and cause our stock price to decline.
If we are not able to compete effectively, we may experience decreased demand for our products, which may result in price reductions.
The medical device market is characterized by extensive research and development, and rapid technological change. Our success depends
upon our ability to develop and maintain a competitive position in both the embolotherapy and related delivery systems markets. We have many competitors in the United States and abroad, including
medical device, biotechnology and other alternative therapeutic companies, universities and other private and public research institutions. Our key competitors in both the fields of embolotherapy and
the delivery systems used in the UFE
procedure are Biocompatibles Limited, Boston Scientific Corporation, Cook Incorporated, Cordis Corporation, a Johnson & Johnson company, Pfizer Inc., Terumo Corporation and CeloNova
BioSciences, Inc.
Many
of our competitors may have greater capabilities, experience and financial resources than we do. As a result, they may develop products more quickly or at less cost, that compete
with our microsphere products and related delivery systems. For example, in recent years we have experienced increased competition from products that compete with Embosphere Microsphere products for
UFE. Moreover, some of our competitors have provided free or reduced-price samples of competing forms of microspheres for use in medical procedures for which our Embosphere Microspheres are indicated.
We believe the availability of these free or reduced-price samples may have adversely affected our revenue, and if this practice recurs our product revenue may continue to be adversely affected.
Currently,
the primary products with which our microspheres compete for some of our applications are spherical PVA sold by Boston Scientific, Terumo and Biocompatibles, Embozene by
CeloNova, gelfoam sold by Pfizer, and non-spherical (particle) PVA sold by Boston Scientific and Cook and drug-eluting beads manufactured by Biocompatibles.
In
the treatment of symptomatic uterine fibroids, our customers compete with obstetrics and gynecology physicians who elect to offer and provide other forms of treatment to their
patients with uterine fibroids that do not require referral to another specialist. These treatment options currently include hysterectomy, myomectomy, laparoscopic myomectomy, drug therapy and
robotic-assisted hysterectomy.
Developments
by other companies of new or improved products, processes or technologies, in particular in the market for treating uterine fibroids, may make our products or proposed
products obsolete or less competitive and may negatively impact our revenue. As a result of these and other factors, we may not be able to improve our products or develop new products or technologies
quickly enough to maintain a competitive position in our market and continue to develop our business commercially.
If we fail to maintain, or in some instances obtain, an adequate level of reimbursement for our products by third-party payors, there may be no commercially viable markets
for our products.
The availability and levels of reimbursement by governmental and other third-party payors affects the market for any medical device. We
may not be able to sell our products profitably if reimbursement is unavailable or limited in scope or amount. Some insurance companies do not fully reimburse for embolization procedures. These
third-party payors may attempt to contain or reduce the costs of health care by lowering the rate at which providers are reimbursed for embolization procedures or challenging the prices that companies
such as ours charge for medical products. For example, on January 1, 2007, the Centers for Medicare and Medicaid Services, or CMS, issued a rule providing for a single,
all-inclusive reimbursement code for UFE. This code is inclusive of all services occurring on the day of
32
Table of Contents
the
procedure. This physician reimbursement rate is lower than the rate historically received by physicians. We believe that some physicians have shifted their procedural mix away from UFE in response
to this change in reimbursement, which has, and may continue to, negatively affect our sales growth. Conversely, beginning January 1, 2008 the CMS assigned a new ambulatory procedure code, or
APC, for UFE procedures performed in an outpatient setting. We believe that this new APC code has resulted in an increase in hospital reimbursement for UFE procedures. However, CMS could adversely
change this APC code in the future or otherwise decrease the payment rate for such UFE procedures. Any change in reimbursement levels could have an adverse effect on utilization rates for UFE or liver
embolization procedures.
In
some foreign countries, particularly the countries of the European Union where our microsphere products are currently marketed and sold, the pricing of medical devices is subject to
governmental control, and the prices charged for our products have in some instances been reduced as a result of these controls.
Initiatives
to limit the growth of health-care costs, including price regulation, are underway in the United States and other major health-care markets. For
example, payors may increase the complexity of patient precertification required prior to performing a UFE procedure. In addition, we may be affected by prescription drug benefit legislation recently
enacted in the United States. It is unclear what, if any, impact on hospital and/or physician reimbursement levels for UFE may result from new health-care reform initiatives currently
being debated in the U.S. Congress. While these initiatives have in many cases related to pharmaceutical pricing, implementation of more sweeping health-care reforms in significant markets
may limit the price of, or the level at which reimbursement is provided for, our products and may influence a physician's selection of products used to treat patients.
If we do not recruit and retain senior management and other key employees, we may not be able to successfully implement our business strategy.
Our success is substantially dependent on our ability to recruit and retain members of our senior management, including Richard J.
Faleschini, our president and chief executive officer; Martin J. Joyce, our executive vice president of finance and administration and chief financial officer; Melodie R. Domurad, Ph.D., our vice
president of regulatory, medical affairs and quality systems; and Peter C. Sutcliffe, our vice president of manufacturing, and other key employees. Effective March 31, 2010, Willard W.
Hennemann, Ph. D., our vice president of new products and business development, and Joel B. Weinstein, our vice president of global marketing and sales, will step down from their positions and cease
to be employed by us. Disruptions in our business could result in the near term as a result of their departure or any other such departures. All of the agreements with our officers provide that their
employment may be terminated either by the employee or by us at any time and without notice. The loss of the services of any of these persons might impede the achievement of our research, development
and commercialization objectives. We do not carry key man life insurance on any of our executive officers or other personnel.
If we make any acquisitions, we will incur a variety of costs and may never successfully integrate the acquired businesses into ours.
We may attempt to acquire businesses, technologies, services or products that we believe are a strategic complement to our business
model. We may encounter operating difficulties and expenditures relating to the integration of an acquired business, technology, service or product. These acquisitions may also absorb significant
management attention that would otherwise be available for ongoing development of our business. Moreover, we may never realize the anticipated benefits of any acquisition. We may also make dilutive
issuances of equity securities, incur debt or experience a decrease in the cash available for our operations, or incur contingent liabilities in connection with any future acquisitions.
33
Table of Contents
Because key stockholders beneficially own a significant amount of our common stock, they may be able to exert control over us.
As of March 1, 2010, we believe that Sepracor Inc., an indirect wholly owned subsidiary of Dainippon Sumitomo
Pharma Co., Ltd., or Sepracor, and funds affiliated with Cerberus Capital Management, L.P., or Cerberus, beneficially owned approximately 21% and 13% of our outstanding common
stock, respectively, including shares of common stock issuable upon the
exercise of series A preferred stock held by these stockholders. Moreover, we have granted board-observation rights to Sepracor and Cerberus. Accordingly, Sepracor and Cerberus may have
significant influence over corporate actions requiring stockholder approval, such as the election of directors, amendment of our charter documents and the approval of merger or significant asset sale
transactions. In addition, the shares of our series A preferred stock held by Sepracor and Cerberus entitle them to certain voting rights in accordance with the terms and conditions of the
series A preferred stock. Specifically, we will need the consent of holders of at least 50% of the series A preferred stock initially purchased by Sepracor and Cerberus to undertake
certain key corporate actions, including the following:
-
-
amending our charter or bylaws in a manner that adversely affects the holders of series A preferred stock;
-
-
authorizing or issuing any equity security that is senior to or pari passu with the series A preferred stock; and
-
-
declaring or paying any dividends on, or redeeming or repurchasing any shares of, our capital stock, subject to customary
exceptions.
The
ownership concentration of Sepracor and Cerberus could cause the market price of our common stock to decline. In addition, conflicts of interest between these key stockholders and us
may arise, including with respect to competitive business activities and control of our management and our affairs.
The holders of shares of our series A preferred stock have rights that could adversely affect an investment in our common stock.
The holders of our series A preferred stock have the right to an adjustment in the conversion rate of the series A
preferred stock if we issue securities at a price below the purchase price paid by these holders. These provisions could substantially dilute stockholders' interest in us in the event of future
financing transactions. The holders of series A preferred stock also have the right to receive a 6% dividend per annum which, at our election, may be paid in cash or additional shares of
series A preferred stock. To the extent such dividends are paid in stock, this dividend could also further dilute stockholders' ownership interest. In addition, the holders of our
series A preferred stock have the right to participate in future capital-raising transactions by us. The existence of this right may reduce our ability to establish terms with respect to, or
enter into, any financing with parties other than the holders of our series A preferred stock.
In
the event that we enter into an acquisition or business combination in which we sell all or substantially all of our assets, or if there occurs a change of control of a majority of
our common stock outstanding prior to such transaction, the holders of our series A preferred stock will have the right to receive, before any distributions or payments to the holders of our
common stock, an amount in cash equal to their initial purchase price for the Series A preferred Stock, $8,000,000, plus an amount equal to any accrued but unpaid dividends, and will then
participate with the holders of the common stock on a pro-rata basis with respect to the distribution of any remaining assets. The existence of this right may make it difficult for us to
raise capital in financing transactions with third parties and will also result in holders of our common stock receiving smaller distributions or payments upon a change of control or
34
Table of Contents
asset
sale than they would be entitled to receive if no preferential payments were required to be made to holders of our series A preferred stock.
Our employees may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements and insider trading.
We are exposed to the risk of employee fraud or other misconduct. Misconduct by employees could include intentional failures to comply
with FDA regulations, to provide accurate information to the FDA, to comply with manufacturing standards we have established, to comply with federal and state health-care fraud and abuse
laws and regulations or the Foreign Corrupt Practices Act, to report financial information or data accurately or to disclose unauthorized activities to us. Employee misconduct could also involve the
improper use of customer information or information obtained in the course of clinical trials, which could result in regulatory sanctions and serious harm to our reputation. We have adopted a Code of
Business Conduct and Ethics, but it is not always possible to identify and deter employee misconduct, and the precautions we take to detect and prevent this activity may not be effective in
controlling unknown or unmanaged risks or losses.
The
marketing claims the FDA specifically authorized us to make regarding our microspheres in the United States were set forth in the FDA clearance. Our EmboGold Microspheres have not
been specifically cleared for use in UFE. Although our QuadraSphere Microspheres are identical to our HepaSphere Microspheres, which are currently marketed in the European Union for use in the
embolization of hepatocellular carcinoma and hepatic metastasis, our QuadraSphere Microspheres are not indicated for use in hepatocellular carcinoma and hepatic metastasis. We will need to conduct a
clinical trial and obtain approval of a marketing application from the FDA in order to claim the use of the QuadraSphere Microspheres for the treatment of a specific disease or condition, such as
hepatocellular cancer or hepatic metastasis in the United States, while European Union regulations do not require such an application for this class of medical devices. In order for us to seek FDA
approval or clearance to promote the use of QuadraSphere Microspheres for the embolization of hepatocellular carcinoma and hepatic metastasis, we will need to complete a clinical trial and submit
positive clinical data to the FDA. In October 2009, we submitted to the FDA an IDE application to commence a
clinical trial to compare the effectiveness of our QuadraSphere Microspheres combined with the chemotherapeutic agent doxorubicin against conventional transarterial chemoembolization with doxorubicin
in patients with primary liver cancer. The FDA has advised us that our study protocol will need to include survival as a primary endpoint for the trial, rather than overall tumor response rate at six
months, which was the primary endpoint that we proposed in our initial IDE application. Our satisfactory resolution of the FDA's comments on the IDE is a condition to starting the clinical trial. We
are currently evaluating the FDA's protocol requirements for the trial, including how the primary endpoint requirements will affect our plans regarding the size of the trial and the timeline and cost
for completion. We have not reached a conclusion about whether or when to undertake the clinical trial and if we determine to not undertake the trial, or if we undertake the trial and the results are
not sufficient to obtain FDA approval, then we will not be able to promote our QuadraSphere Microspheres for liver cancer indications. Although we have not received approval or clearance from the FDA
to market our QuadraSphere Microspheres for primary or metastatic liver cancer in the United States, we believe that some physicians are using QuadraSphere Microspheres off-label in the
treatment of primary and metastatic liver cancer. If the FDA were to conclude that we have improperly promoted our products for unapproved indications, the FDA could allege that our promotional
activities misbrand or adulterate our products.
35
Table of Contents
In addition, during the course of our operations, our directors, executives and employees may have access to material, nonpublic information regarding our
business, our results of operations or potential transactions we are considering. Despite our adoption of an Insider Trading Policy, we may not be able to prevent a director or employee from trading
in our common stock on the basis of, or while having access to, material, nonpublic information. If a director or employee were to be investigated, or an action were to be brought against a director
or employee for insider trading, it could have a negative impact on our reputation and our stock price. Such a claim, with or without merit, could also result in substantial expenditures of time and
money, and divert attention of our management team from other tasks important to the success of our business.
Risks Relating to Regulatory Matters
If we do not obtain and maintain the regulatory approvals or clearances required to market and sell our products, then our business may be unsuccessful and the market price
of our stock may decline.
We are subject to regulation by government agencies in the United States and abroad with respect to the design, manufacture, packaging,
labeling, advertising, promotion, distribution and sale of our products. For example, our products are subject to approval or clearance by the FDA prior to commercial marketing in the United States.
Similar regulations exist in most major foreign markets, including the European Union, Latin America and Asia. The process of obtaining necessary regulatory approvals and clearances is
time-consuming and expensive for us. If we do not receive required regulatory approval or clearance to market our products, or if any approvals or clearances we have received are revoked
or terminated, we may not be able to commercialize our products and become profitable, and the value of our common stock may decline.
We
are also subject to numerous U.S. and foreign regulatory requirements governing the conduct of clinical trials, marketing authorization, pricing and third-party reimbursement. The
foreign regulatory approval process includes all the risks associated with FDA approval or clearance described above, as well as risks attributable to the requirement to satisfy local regulations in
foreign jurisdictions. Approval or clearance by the FDA does not ensure approval by regulatory authorities of some countries outside the United States. Many foreign regulatory authorities, including
those in major markets such as Japan and the People's Republic of China, have different approval processes.
Clinical trials of new products or new indications for our products, if commenced, may not be successful, which may delay or prevent commercialization of such new products
or new indications.
In order to obtain regulatory approval to market new products or new indications for our products, we may be required to complete
clinical trials to demonstrate the safety and effectiveness of such new products or new indications. For example, FDA regulations require that we conduct clinical trials and submit a marketing
application seeking to obtain the approvals and clearances required to promote our QuadraSphere Microspheres for primary liver cancer. In October 2009, we submitted to the FDA an IDE application to
commence a clinical trial comparing the effectiveness of our QuadraSphere Microspheres combined with the chemotherapeutic agent doxorubicin against conventional transarterial chemoembolization with
doxorubicin in patients with primary liver cancer. We are currently in discussions with the FDA about the clinical trial protocol and have not reached a conclusion about whether or when to undertake
the clinical trial. Clinical testing is expensive, difficult to design and implement, can take multiple years to complete and is uncertain as to outcome. We may experience numerous unforeseen events
during, or as a result of, any clinical trials that could delay or prevent our ability to receive the regulatory approval we are seeking. These unforeseen events may
include:
-
-
regulatory authorities may not approve our application to commence such a trial, or we may be delayed in obtaining
approval of such application by the regulatory authority;
-
-
conditions imposed on us by the regulatory authority regarding the scope or design of such clinical trials;
36
Table of Contents
-
-
difficulty obtaining or maintaining institutional review board approval of such clinical trials at one or more clinical
sites;
-
-
difficulty in complying with applicable regulations for conducting such clinical trials;
-
-
any clinical trials we may undertake may produce negative or inconclusive results, and we may decide, or regulators may
require us, to conduct additional clinical trials;
-
-
the number of patients required for such clinical trials may be larger than we anticipate, enrollment in such clinical
trials may be slower than we anticipate, or participants may drop out of such clinical trials at a higher rate than we anticipate, any of which would result in significant delays and increased costs;
-
-
we might have to suspend or terminate clinical trials if the participants are experiencing unacceptable health risks;
-
-
regulators may require that we hold, suspend or terminate clinical research for various reasons, including noncompliance
with regulatory requirements;
-
-
the cost of clinical trials may be greater than we anticipate; and
-
-
we may not achieve the desired favorable effects, the treatment may not compare favorably with other methods or
procedures, may produce undesirable side effects or may have other unexpected characteristics.
If
we are required to conduct additional clinical trials or other testing of the use of new products or products for new indications, if we are unable to successfully complete clinical
trials or other testing, if the results of any such trials are not positive or are only modestly positive or if there are safety concerns, we may:
-
-
be delayed in obtaining marketing approval for the new products or new indications that are the subject of the clinical
trial;
-
-
not be able to obtain marketing approval; or
-
-
obtain approval for an indication that is not as broad as the indication that we sought.
The
delay, suspension or discontinuation of clinical trials for any of the foregoing reasons could adversely affect our efforts to obtain regulatory approval for and to commercialize the
new products or new indications that are the subject of the clinical trial, increase our operating expenses, and have a material adverse effect on our results of operations and financial condition.
If the FDA or another regulatory agency places restrictions on, or imposes additional approval or clearance requirements with respect to, products we are then marketing, we
may incur substantial additional costs and experience delays or difficulties in continuing to market and sell these products.
Even if the FDA grants us approval or clearance with respect to marketing any product, such product will be subject to ongoing
regulatory review and restrictions, including the review of clinical results which are reported after such product is made commercially available, and restrictions on the indications for which we can
market the product. The FDA can propose to withdraw approval or clearance or impose additional restrictions if new clinical data on the use of a product indicates that a product may not be safe for
use under the approved conditions of use. For example, we were named as a defendant in two product liability lawsuits in which the plaintiffs claimed that our microspheres were defective and not
accompanied by proper warnings and instructions for use. Product liability claims like these can lead the FDA and comparable regulatory agencies outside of the U.S. to engage in a further review of
the safety of these products and their approved conditions for use. On the basis of that review, the FDA or such other regulatory agency could determine to impose additional requirements regarding the
manufacturing, marketing or promotion of these products, require changes to the labeling of these products, or commence proceedings to withdraw its clearance of these products, any of which
37
Table of Contents
could
harm our reputation, adversely affect market acceptance of these products or cause a decline in revenue from the sale of the applicable product, which could adversely affect our financial
condition, results of operations, the viability of our business and our future prospects and cause our stock price to decline.
The
marketing claims we are permitted to make in labeling or advertising regarding our microspheres in the United States are limited to those consistent with any FDA approval or
clearance. For example, because our EmboGold Microspheres are not cleared for specific use in UFE, we may not promote them for this specific use. Although our QuadraSphere Microspheres are identical
in all respects to our HepaSphere Microspheres, which are currently marketed in the European Union for use in the embolization of hepatocellular carcinoma and hepatic metastasis, our QuadraSphere
Microspheres are not specifically indicated for use in hepatocellular carcinoma and hepatic metastasis. FDA regulations require that we conduct clinical trials prior to submitting a marketing
application to claim the use of QuadraSphere Microspheres for the treatment of a specific disease or condition, such as hepatocellular cancer or hepatic metastasis, while European Union regulations do
not require preclearance clinical trials for this class of medical device on an indication-by-indication basis. Accordingly, in order for us to seek FDA approval or clearance
to promote the use of QuadraSphere Microspheres for the embolization of hepatocellular carcinoma and hepatic metastasis, we will be required to undertake clinical trials. In October 2009, we submitted
to the FDA an IDE application to commence a clinical trial to compare the effectiveness of our QuadraSphere Microspheres combined with the chemotherapeutic agent doxorubicin against conventional
transarterial chemoembolization with doxorubicin in patients with primary liver cancer. The FDA has advised us that our study protocol will need to include survival as a primary endpoint for the
trial, rather than overall tumor response rate at six months, which was the primary endpoint that we proposed in our initial IDE application. Our satisfactory resolution of the FDA's comments on the
IDE is a condition to starting the clinical trial.
We are currently evaluating the FDA's protocol requirements for the trial, including how the primary endpoint requirements will affect our plans regarding the size of the trial and the timeline and
cost for completion. We have not reached a conclusion about whether or when to undertake the clinical trial and if we determine to not undertake the trial, or if we undertake the trial and the results
are not sufficient to obtain FDA approval, then we will not be able to promote our QuadraSphere Microspheres for liver cancer indications. If the FDA were to conclude that our advertisements, labeling
or statements made by our sales representatives or other company officials, improperly promote our products for unapproved indications or otherwise violate the law, the FDA could allege that our
promotional activities misbrand or adulterate our products. Specifically, the FDA could issue an untitled letter or warning letter, which may request, among other things, that we cease such
promotional activities, including disseminating the advertisements and promotional labeling, and that we issue corrective labeling, including sending letters to health-care providers. The
FDA also could take enforcement action, including seizure of product, injunction or criminal prosecution against us and our officers or employees, or seek civil penalties, disgorgement or restitution.
We
may in the future make modifications to our microspheres or their labeling or the process through which they are manufactured, which we determine do not necessitate the filing of a
new 510(k) notification or premarket approval application supplement, or PMA supplement. However, if the FDA does not agree with our determination, it may require us to make additional 510(k) filings
for the modification, or to file a PMA supplement, and we may be prohibited from marketing the modified product or the new claims until we obtain FDA approval or clearance. The FDA may also
institute an enforcement action against us in these circumstances. If we fail to comply with applicable federal, state or foreign laws or regulations, we could be subject to enforcement actions which
could affect our ability to develop, market and sell our products and product candidates successfully and could harm our reputation and lead to decreased acceptance of our products by the market.
38
Table of Contents
Even if we obtain the necessary FDA clearances or approvals, if we or our suppliers fail to comply with ongoing regulatory requirements, our products could be subject to
corrections, removals or recalls from the market or other enforcement action.
We are subject to the Medical Device Reporting, or MDR, regulations that require us to report to the FDA if our products may have
caused or contributed to a patient death or serious injury, or if our device malfunctioned and a recurrence of the malfunction would likely result in a death or serious injury. We must also file
reports of device corrections and removals and adhere to the FDA's rules on labeling and promotion. We must also comply with the FDA's Good Manufacturing Practice requirements as set forth in the
Quality System regulations. Our failure to comply with these or other applicable regulatory requirements could result in enforcement action by the FDA, which may include any of the
following:
-
-
untitled letters, warning letters, fines, product seizures, injunctions and civil penalties;
-
-
administrative detention, which is the detention by the FDA of medical devices believed to be adulterated or misbranded;
-
-
customer notification of, or FDA orders for, repair, replacement or refund;
-
-
voluntary or mandatory recall of our products;
-
-
operating restrictions, partial suspension or total shutdown of production or a refusal to allow imported product into the
United States;
-
-
refusal to review premarket notification or premarket approval submissions;
-
-
rescission of a substantial equivalence order or suspension or withdrawal of a premarket approval; and
-
-
criminal prosecution.
If
we are subject to an enforcement action, our ability to develop, market and sell our products successfully would be adversely affected, our reputation could be harmed, and we may
experience decreased market acceptance of our products.
Existing or future legislation or regulations may make it more difficult and costly for us to obtain regulatory approval or clearance of our product candidates and to
produce, market and distribute products after approval.
In September 2007, the President of the United States signed into law the Food and Drug Administration Amendments Act of 2007, or
FDAAA. The FDAAA grants a variety of new powers to the FDA, many of which are aimed at improving the safety of drug products before and after approval. Under the FDAAA, companies that violate certain
provisions of the new law are subject to substantial civil monetary penalties. The new requirements and other changes that the FDAAA imposes may make it more difficult, and likely more costly, to
obtain approval or clearance of new medical device products and to produce, market and distribute products after approval. The FDA is currently reviewing its 510(k) regulatory program and may
implement changes that will make it more difficult, time-consuming, or costly to obtain 510(k) clearance.
The
FDAAA also establishes requirements for registering certain types of device clinical trials, and reporting the results of those trials, in a national, publicly accessible database.
In addition, the FDA requires certification of compliance with this requirement to be submitted with applications or reports concerning such studies. The failure to comply with the clinical trial
registry requirements is subject to civil monetary penalties.
Legislation
or regulations enacted or modified in the future, including potential changes to the 510(k) premarket notification process, may also make it more difficult and/or costly to
obtain clearance of new medical device products or to produce, market and distribute products after approval.
39
Table of Contents
We may be subject, directly or indirectly, to federal and state health-care fraud and abuse laws and regulations and, if we are unable to fully comply with such
laws, could face substantial penalties.
Our operations may be directly or indirectly affected by various broad state and federal health-care fraud and abuse laws,
including the federal Anti-Kickback Statute, which prohibit any person from knowingly and willfully offering, paying, soliciting or receiving remuneration, directly or indirectly, to
induce or reward either the referral of an individual, or the furnishing or arranging for an item or service, for which payment may be made under federal health-care programs, such as the
Medicare and Medicaid programs.
If
our past or present operations are found to be in violation of these laws, we and our officers may be subject to civil or criminal penalties, including large monetary penalties,
damages, fines, imprisonment and exclusion from Medicare and Medicaid program participation. If enforcement action were to occur, our business and financial condition would be harmed.
Risks Relating to Our Intellectual Property
If we are unable to obtain patent protection for our products, their competitive value could decline.
We may not obtain meaningful protection for our technology and products with the patents and patent applications that we own or license
relating to our microsphere technology or other ancillary products. In particular, the patent rights we possess or are pursuing generally cover our technologies to varying degrees, and these rights
may not prevent others from designing products similar to or otherwise competitive with our Embosphere Microspheres and other products we commercialize. To the extent that our competitors are able to
design products competitive with ours, we may experience less market penetration with our products and, consequently, we may have decreased revenue. The patent laws involving medical devices and life
sciences technologies such as our microspheres are complex and vary from country to country. Thus, although we have a current policy of pursuing patent protection wherever possible for our new
technologies, we cannot predict whether we will secure patent protection from any of our existing patent applications in the United States or abroad. We also cannot predict whether such coverage
obtained in any of our United States or foreign patent applications will be meaningful.
We
do not know whether competitors have similar U.S. patent applications on file, since U.S. patent applications filed before November 28, 2000, or for which no foreign patents
will be sought, are secret until issued, and applications filed after November 28, 2000 are published approximately 18 months after their earliest priority date. Consequently, the United
States Patent and Trademark Office could initiate interference proceedings involving our owned or licensed U.S. patent applications or issued patents. Further, there is a substantial backlog of patent
applications at the United States Patent and Trademark Office, and the approval or rejection of patent applications may take several years.
We
require our employees, consultants and advisors to execute confidentiality agreements. However, we cannot guarantee that these agreements will provide us with adequate protection
against improper use or disclosure of confidential information. In addition, in some situations, these agreements may conflict with, or be subject to, the rights of third parties with whom our
employees, consultants or advisors have prior employment or consulting relationships. Further, others may independently develop substantially equivalent proprietary information and techniques, or
otherwise gain access to our trade secrets. Our failure to protect our proprietary information and techniques may inhibit or limit our ability to exclude certain competitors from the market.
40
Table of Contents
If we become involved in expensive patent litigation or other proceedings to enforce or defend our patent rights, we could incur substantial costs and expenses or
substantial liability for damages or be required to stop our product development and commercialization efforts.
On January 13, 2005, we were notified of a Notice of Opposition filed in the European Patent Office, or EPO, by Biocompatibles
UK Limited on December 23, 2004, challenging the patentability of the claims in our granted European Patent, EP 1128816, which relates to certain PVA microspheres for use in embolization and
methods thereof. On December 10, 2007, the EPO upheld the claims of our patent in amended form and rendered its formal written decision on December 27, 2007. We and Biocompatibles have
appealed this decision. The EPO has not set a date, but we expect oral proceedings to be scheduled within the next twelve months. On July 1, 2008, Biocompatibles UK Limited filed a Notice of
Opposition in the EPO challenging the patentability of the claims in our granted European Patent, EP 1267839, which relates to certain drug-loaded microspheres and their use in
embolization. We filed a reply to Notice of Opposition on March 19, 2009. Oral Proceedings are scheduled for September 23, 2010. We intend to continue to defend our European patents. We
are not able to predict the outcome of either of these opposition proceedings.
With
the exception of the two European Opposition proceedings just described, we are not currently involved in any other litigation or actions with third parties to enforce or defend our
patent rights. However, in order to protect or enforce our patent rights, we may have to initiate legal proceedings against third parties, such as infringement suits, opposition proceedings or
interference proceedings or defend against such proceedings. By initiating legal proceedings to enforce our intellectual property rights, we may also provoke these third parties to assert claims
against us. If we do not prevail in any such proceedings, our patents could be narrowed, invalidated or rendered unenforceable. Furthermore, we may be sued for infringing on the intellectual property
rights of others. We may find it necessary, if threatened, to initiate a lawsuit seeking a declaration from a court regarding the proprietary rights of others. As we introduce new products into the
market, we may be accused of infringing the patent rights of third parties. If we do not prevail in such a patent litigation brought against one of our products or its use, we may be required to pay
damages, stop selling our product or obtain a royalty-bearing license if one is obtainable. Any required license might not be available to us on acceptable terms, or at all. In addition, some licenses
may be nonexclusive, and therefore our competitors may have access to the same technology licensed to us. If we fail to obtain a required
license or are unable to design around a patent, we may be prevented from selling some of our products, which could decrease our revenue. Intellectual property litigation is costly and, even if we
prevail, could divert management attention and resources away from our business.
If our exclusive license to use the Embosphere Microsphere intellectual property that we jointly own with L'Assistance Publique-Hôpitaux de
Paris is terminated, then our competitive position, financial condition, prospects and stock price could be adversely affected.
We
have an agreement with L'Assistance Publique-Hôpitaux de Paris, or AP-HP, pursuant to which AP-HP has granted us exclusive rights
to use two United States patents and their foreign counterparts that we jointly own with AP-HP relating to Embosphere Microspheres. This agreement can be terminated on short notice by
AP-HP if we default on our obligations under the license and fail to cure such default after notice is provided. The license imposes commercialization, sublicensing, royalty, insurance and
other obligations on us. Our failure, or any sublicensee's failure, to comply with the terms of the license could result in our loss of our exclusive rights to the jointly-owned intellectual property
that is the subject of the license. If the AP-HP exclusive license is terminated, AP-HP will have the right to grant a non-exclusive license to our jointly-owned
technology to a third party which would then have the freedom to seek regulatory approval of, and to market, products identical to our Embosphere Microspheres. This could have a material adverse
effect on our competitive business position, financial condition and our business prospects and could cause our stock price to decline.
41
Table of Contents
Risks Relating to the Production and Supply of Our Products
If we experience manufacturing delays or interruptions in production, then we may experience customer dissatisfaction and our reputation could suffer.
If we fail to produce sufficient products at our own manufacturing facility or at a third-party manufacturing facility, we may be
unable to deliver products to our customers on a timely basis, which could lead to customer dissatisfaction and could harm our reputation and ability to compete. We currently produce and package all
of our microsphere products in one manufacturing facility in France. We have contracted with two suppliers for our guidewire products. Either we or any third-party manufacturer would likely experience
significant delays or cessation in producing our products if we or they experience difficulties, delays or failures in manufacturing processes, quality control processes, equipment calibration,
process-critical equipment or in any other process necessary for the manufacture of our products, or if we or they experience a labor-based error or omission, or a labor strike, natural disaster,
local or regional conflict or any disruption in supply. If we are unable to
manufacture and package our products at our facility in France, we may be required to enter into arrangements with one or more alternative contract manufacturing companies.
Even
if we are able to identify alternative facilities to manufacture our products, if necessary, we may experience disruption in the supply of our products until such facilities are
available. Although we believe we possess adequate insurance for damage to our property and the disruption of our business from casualties, such insurance may not be sufficient to cover all of our
potential losses and may not be available to us on acceptable terms or at all. Our failure to deliver products on a timely basis could lead to customer dissatisfaction and damage our reputation. In
addition, if we are required to depend on third-party manufacturers, our profit margins may be lower, which will make it more difficult for us to achieve profitability.
Medical
device manufacturers must adhere to current Good Manufacturing Practices and Quality System Regulations which are enforced by the FDA through its inspection program. We and other
third-party manufacturers must comply with various quality system requirements pertaining to all aspects of our product design and manufacturing process, including requirements for packaging, labeling
and record keeping, complaint handling, corrective and preventive actions, adoption of new manufacturing methods and internal auditing. In addition, medical device manufacturing laws are also in
effect in many countries outside of the U.S. We or our third-party manufacturers may not be able to comply or maintain compliance. If we or any third-party manufacturers we engage fail to comply, such
noncompliance could significantly delay our receipt of new product premarket approvals, result in FDA enforcement action, including an embargo on imported devices, or otherwise cause delays and
disruptions in the manufacture and supply of our products, any of which would harm our reputation and could materially adversely affect our operating results.
Because we rely on a limited number of suppliers, we may experience difficulty in meeting our customers' demands for our products in a timely manner or within budget.
We currently purchase key components and services with respect to our microspheres, catheters and guidewires from approximately ten
third-party vendors, including a third party from which we purchase guidewires for our Segway Guidewire product; a third party from which we purchase catheters for our EmboCath Plus Infusion
Microcatheter product; and a third party from which we purchase guidewires for our Sequitor Steerable Guidewire and recently released Tenor Steerable Guidewire product. Our reliance on our suppliers
exposes us to risks, including:
-
-
the possibility that one or more of our suppliers could terminate their services at any time without penalty;
-
-
the potential inability of our suppliers to obtain required components;
42
Table of Contents
-
-
the potential delays and expenses of seeking alternative sources of supply;
-
-
reduced control over pricing, quality and timely delivery due to difficulties in switching to alternative suppliers; and
-
-
the possibility that one or more of our suppliers could fail to be compliant with Quality System Regulations, 21 CFR
Part 820.
Consequently,
in the event that our suppliers delay or interrupt the supply of components for any reason, our ability to produce and supply our products could be impaired, which could
lead to customer dissatisfaction and harm our reputation.
Risks Relating to Our Foreign Operations
If we are unable to meet the operational, legal and financial challenges that we encounter in our international operations, we may not be able to grow our business.
Our worldwide manufacturing and European sales operations are currently conducted primarily through our French subsidiary. Furthermore,
we currently derive a portion of our revenue from the sale of our microspheres and delivery system products outside the United States. For the years ended December 31, 2009, 2008 and 2007,
approximately 22%, 20%, and 19%, respectively, of our revenue was derived from sales of our microspheres and delivery systems in geographic territories outside the United States. We are increasingly
subject to a number of challenges that specifically relate to our international business activities. Our international operations may not be successful if we are unable to meet and overcome these
challenges, which would limit the growth of our business. These challenges include:
-
-
failure of local laws to provide the same degree of protection against infringement of our intellectual property;
-
-
protectionist laws and business practices that favor local competitors, which could slow our growth in international
markets;
-
-
the requirement that we obtain regulatory approval or clearance in each country in which we choose to offer and sell our
products;
-
-
in some jurisdictions, strict government-regulated price controls;
-
-
complex reimbursement procedures;
-
-
potentially longer sales cycles to sell products, which could slow our revenue growth from international sales; and
-
-
potentially longer accounts receivable payment cycles and difficulties in collecting accounts receivables.
In
2008, we commercially launched our Embosphere Microsphere product in the People's Republic of China. Conducting business in China exposes us to a variety of risks and uncertainties
that are unique to China. The economy of China has been transitioning from a planned economy to a market-oriented economy. Although in recent years the Chinese government has implemented measures
emphasizing the utilization of market forces for economic reform, the reduction of state ownership of productive assets and the establishment of sound corporate governance in business enterprises, a
substantial portion of productive assets in China is still owned by the Chinese government. In addition, the Chinese government continues to play a significant role in regulating industrial
development. It also exercises significant control over China's economic growth through the allocation of resources, controlling payment of foreign currency-denominated obligations, setting monetary
policy and providing preferential treatment to particular industries or companies. Efforts by the Chinese government to slow
43
Table of Contents
the
pace of growth of the Chinese economy could result in interruptions of our commercialization efforts in China. In addition, the Chinese legal system is a civil law system based on written
statutes. Unlike common law systems, it is a system in which decided legal cases have little precedential value. In 1979, the Chinese government began to promulgate a comprehensive system of laws and
regulations governing economic matters in general. Accordingly, we cannot predict the effect of future developments in the Chinese legal system, including the promulgation of new laws, changes to
existing laws or the interpretation or enforcement thereof, or the preemption of local regulations by national laws. Our commercialization efforts in China could be materially harmed by any changes in
the political, legal or economic climate in China or the inability to enforce applicable Chinese laws and regulations. If such commercialization efforts in China are materially harmed, we would not be
able to grow sales of our Embosphere Microspheres in China and our operating results could be adversely affected.
Because we translate foreign currency from international sales into U.S. dollars and are required to make foreign currency payments, we may incur losses due to fluctuations
in foreign currency exchange rates.
A significant portion of our business is conducted in the European Union euro. We recognize foreign currency gains or losses arising
from our operations in the period incurred. As a result, currency fluctuations between the U.S. dollar and the currencies in which we do business will cause foreign currency translation gains and
losses, which may cause fluctuations in our future operating results. We do not currently engage in foreign exchange hedging transactions to manage our foreign currency exposure.
Risk Relating to Our Stock Price
Because the market price of our stock is highly volatile, investments in our stock could rapidly lose their value and we may incur significant costs from class action
litigation.
The market price of our stock is highly volatile. From January 1, 2008 through March 1, 2010, the price of our common
stock has ranged from a low of $1.26 to a high of $6.00. As a result of this volatility, investments in our stock could rapidly lose their value.
Our
stock price could fluctuate for many reasons, including, without limitation:
-
-
variations in our quarterly operating results or those of companies that are perceived to be similar to us;
-
-
third-party sales of large blocks of our common stock;
-
-
rumors relating to us or our competitors;
-
-
changes to our research and development plans and/or announcements regarding new technologies by us or our competitors;
-
-
our decision not to commence our planned QuadraSphere Microspheres clinical trial, or if commenced, suspension or
termination of such trial;
-
-
negative publicity or unfavorable media coverage;
-
-
filings of, results of or developments under lawsuits involving us or our competitors;
-
-
sales by us of equity or debt to fund our operations;
-
-
the loss of any of our key scientific or management personnel;
-
-
FDA or international regulatory actions or lawsuits concerning the safety of our products; and
-
-
market conditions, both in the medical device sector and generally.
44
Table of Contents
In
addition, the stock market often experiences extreme price and volume fluctuations, which affect the stock prices of many medical device companies and which are often unrelated to the
operating performance of these companies.
When
the market price of a stock has been as volatile as our stock price has been, holders of that stock may institute securities class action litigation against the company that issued
the stock. If any of our stockholders were to bring a lawsuit of this type against us, even if the lawsuit is without merit, we could incur substantial costs in defending the lawsuit. The lawsuit
could also divert the time and attention of our management.
Securities analysts may not initiate coverage for our common stock or may issue negative reports, and this may have a negative impact on the market price of our common
stock.
Securities analysts may elect not to provide research coverage of our common stock. If securities analysts do not cover our common
stock, the lack of research coverage may adversely affect the market price of our common stock. The trading market for our common stock may be affected in part by the research and reports that
industry or financial analysts publish about us or our business. If one or more of the analysts who elect to cover us downgrades our stock, our stock price could decline. If one or more of these
analysts ceases coverage of our company, we could lose visibility in the market, which in turn could cause our stock price to decline. It may be difficult for companies such as ours, with smaller
market capitalizations, to attract independent financial analysts that will cover our common stock. This could have a negative effect on the market price of our stock.
Item 1B. UNRESOLVED STAFF COMMENTS
None.
Item 2. PROPERTIES
We currently lease office and manufacturing facilities in Rockland, Massachusetts, and Roissy, France. Our Rockland, Massachusetts
office includes approximately 13,000 square feet of corporate offices, laboratory and warehouse space pursuant to a lease expiring on February 28, 2011. Our Roissy, France facility, where we
produce our Embosphere Microspheres, HepaSphere Microspheres and QuadraSphere Microspheres, includes approximately 18,000 square feet of office, laboratory and manufacturing space and is leased
through May 2013.
We
believe that the leased facilities in Rockland, Massachusetts and Roissy, France are suitable to meet our current requirements and that suitable additional or substitute space will be
available to us on commercially reasonable terms, if needed in the future.
Item 3. LEGAL PROCEEDINGS
None.
Item 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS
No matters were submitted to a vote of our security holders, through solicitations of proxies or otherwise, during the quarter ended
December 31, 2009.
45
Table of Contents
EXECUTIVE OFFICERS
As of March 1, 2010, our executive officers, their respective ages and their positions are as follows:
|
|
|
|
|
|
Name
|
|
Age
|
|
Position
|
Richard J. Faleschini
|
|
|
63
|
|
President and Chief Executive Officer
|
Martin J. Joyce
|
|
|
56
|
|
Executive Vice President and Chief Financial Officer
|
Melodie R. Domurad
|
|
|
52
|
|
Vice President of Regulatory, Medical Affairs, and Quality Systems
|
Willard W. Hennemann(1)
|
|
|
55
|
|
Vice President of New Product and Business Development
|
Peter C. Sutcliffe
|
|
|
60
|
|
Vice President of Manufacturing
|
Joel B. Weinstein(1)
|
|
|
59
|
|
Vice President of Global Marketing and Sales
|
-
(1)
-
Effective
March 31, 2010 Mr. Hennemann and Mr. Weinstein will step down from their positions and cease to be employed by us.
Richard J. Faleschini
has served as our President and Chief Executive Officer since November 2004 and as a director of BioSphere Medical
since March 2005. From 2003 to 2004, Mr. Faleschini served as Vice President and General Manager of the gynecology division at American Medical Systems Holdings, Inc., a supplier of
medical devices to physicians specializing in the treatment of urological and gynecological disorders. From 1999 to 2003, Mr. Faleschini was Vice President of Marketing and Sales for American
Medical Systems Holdings, Inc. From 1995 to 1999, he held executive marketing and general management positions at Medtronic, Inc., a medical technology company, with responsibilities in
several sectors of their cardiac rhythm management, cardiac surgery, and interventional vascular businesses. His previous experience also includes executive marketing and sales management
responsibilities at Cordis Corporation, Biomagnetic Technologies, and ATL/ADR Ultrasound. Mr. Faleschini received his B.S. in biology and M.S. in physiology from Michigan Technological
University.
Martin J. Joyce
has served as our Executive Vice President and Chief Financial Officer since January 2006. He served as our Chief
Financial Officer and Vice President from September 2004 to January 2006. From 2000 to 2004, Mr. Joyce served as Managing Partner of Stratex Group LLC, a provider of biopharmaceutical
executive services to early-stage companies and venture investors. From 1996 to 2000, Mr. Joyce was North American Chief Financial Officer for Serono Inc. a biotechnology company. Prior
to serving as North American Chief Financial Officer, Mr. Joyce held a variety of senior level positions within Serono in finance, sales, marketing and manufacturing. Mr. Joyce was
previously employed at Millipore Corporation, a high technology bioscience company, and Bose Corporation, an audio equipment manufacturer, focusing on strategic planning, product rationalization and
return on investment analysis. Mr. Joyce received a B.S. in finance from Northeastern University and a M.B.A. from Suffolk University, Boston, Massachusetts.
Melodie R. Domurad
has served as our Vice President of Regulatory, Medical Affairs and Quality Systems since January 2008. From 1997 to
2007, Dr. Domurad served as Vice President of Clinical, Regulatory and Quality Affairs for Matritech, Inc., a developer of proteomics-based diagnostic products for the early detection of
cancer. From 1994 to 1997, Dr. Domurad held the position of Director of Clinical Research and Clinical Research Manager at Ergo Science, Inc., where she focused on therapeutics for
diabetes, obesity and cancer. Prior to joining Ergo Science, Inc., Dr. Domurad held leadership roles at the Center for the Study of Nutrition and Medicine at the New England Deaconess
Hospital and at the Cambridge Center for Holistic Health. Dr. Domurad holds a B.A. from Cornell University and a Ph.D. from the University of Cincinnati.
46
Table of Contents
Willard W. Hennemann
has served as our Vice President of New Product and Business Development since February 2008. From 2006 to early
2008, Dr. Hennemann served as Vice President of Intravascular Systems/Marketing for Medeikon Corporation, an early-stage developer of proprietary disposable technologies to treat cardiovascular
disease. From 2000 to 2006, Dr. Hennemann held the position of Vice President of Research and Development/Interventional Vascular at CryoCath Technologies, a leader in catheter-based products
for the cryotherapeutic treatment of cardiovascular disease. From 1998 to 1999, Dr. Hennemann served as Director of Marketing and Product Development for InterVascular, Inc., a division
of Datascope, which produces a broad line of vascular grafts. From 1996 to 1998, Dr. Hennemann served as Director of Marketing/International Clinical Studies of the Global Stent Business Unit
for Medtronic, Inc., a medical technology company. Prior to Medtronic, Dr. Hennemann assumed roles of increasing responsibility over a 12-year period with Cordis Corporation,
a pioneer in developing innovative diagnostic and therapeutic devices for interventional vascular medicine. Dr. Hennemann received his B.A. from the University of Maryland and a Ph.D. from the
University of Florida.
Peter C. Sutcliffe
has served as our Vice President of Manufacturing since October 2002. From 2001 to 2002, Mr. Sutcliffe served as
the Vice President for North American Manufacturing for Whatman, Plc., a life science filtration company. From 1996 to 2001, he was the Chief Operating Officer for HemaSure Inc., a
manufacturer and supplier of blood filters. From 1982 to 1996, Mr. Sutcliffe held the position of Vice President of Manufacturing for Corning Costar Company, a life science products company.
Prior to Costar, he held manufacturing management positions with Millipore Corporation, a high technology bioscience company. Mr. Sutcliffe holds a B.S. in biology from the University of
Richmond in Virginia and a M.B.A. from Sul Ross State University of Texas, Fort Bliss, Texas.
Joel B. Weinstein
has served as our Vice President of Global Marketing and Sales since January 2008. Prior to joining BioSphere Medical,
Mr. Weinstein founded and led several medical device companies, and founded his own firm, which provided strategic counsel to medical device companies and venture capital firms. From 1987 to
1998, Mr. Weinstein served as Vice President of Marketing and Business Development for Hologic, Inc., a medical device company focused on women's health. Prior to Hologic,
Mr. Weinstein had progressively greater management responsibilities over a seven-year period with Advanced Technology Laboratories, a multi-modality diagnostic ultrasound company.
He received his bachelor's degree in Electrical Engineering from City College of New York and a M.B.A. from Western New England College.
47
Table of Contents
PART II
Item 5. MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Our common stock trades on the NASDAQ Global Market under the symbol "BSMD." On March 1, 2010, the last reported sale price of
our common stock on the NASDAQ Global Market was $3.09, and there were approximately 85 stockholders of record. This number does not include stockholders for whom shares are held in "nominee" or
"street" name.
The
following table shows the range of high and low sales prices per share of our common stock for the last two fiscal years as reported on the NASDAQ Global Market.
|
|
|
|
|
|
|
|
|
|
2009
|
|
|
|
High
|
|
Low
|
|
First Quarter
|
|
$
|
2.98
|
|
$
|
1.60
|
|
Second Quarter
|
|
$
|
2.62
|
|
$
|
1.26
|
|
Third Quarter
|
|
$
|
4.19
|
|
$
|
2.19
|
|
Fourth Quarter
|
|
$
|
3.67
|
|
$
|
2.51
|
|
|
|
|
|
|
|
|
|
|
|
2008
|
|
|
|
High
|
|
Low
|
|
First Quarter
|
|
$
|
6.00
|
|
$
|
3.30
|
|
Second Quarter
|
|
$
|
5.12
|
|
$
|
3.10
|
|
Third Quarter
|
|
$
|
4.50
|
|
$
|
3.15
|
|
Fourth Quarter
|
|
$
|
3.59
|
|
$
|
1.55
|
|
We
have not paid any cash dividends on our common stock since our inception and do not intend to pay any cash dividends in the foreseeable future.
48
Table of Contents
Comparative Stock Performance
The following graph compares the cumulative total stockholder return on our common stock for the last five fiscal years with the
cumulative total return on (i) the Total Return Index for the NASDAQ Stock Market (U.S. Companies), which we refer to as the NASDAQ Composite Index (U.S.) and (ii) the NASDAQ Medical
Equipment Index, which we refer to as the NASDAQ Medical Equipment Index. This graph assumes the investment of $100 on December 31, 2004 in our common stock and each of the indices listed
above, and assumes dividends are reinvested. We have not paid any dividends on our common stock and no dividends are included in the representation
of our performance. The stock price performance shown in the below graph is not necessarily indicative of future price performance. Measurement points are the last trading day of the fiscal years
ended December 31, 2005, 2006, 2007, 2008 and 2009.
COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN
AMONG BIOSPHERE MEDICAL, INC., THE NASDAQ COMPOSITE INDEX (U.S.)
AND THE NASDAQ MEDICAL EQUIPMENT INDEX
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12/05
|
|
12/06
|
|
12/07
|
|
12/08
|
|
12/09
|
|
BioSphere Medical, Inc.
|
|
$
|
208.23
|
|
$
|
171.72
|
|
$
|
131.88
|
|
$
|
49.61
|
|
$
|
70.44
|
|
NASDAQ Composite Index (U.S.)
|
|
$
|
101.33
|
|
$
|
114.01
|
|
$
|
123.71
|
|
$
|
73.11
|
|
$
|
105.61
|
|
NASDAQ Medical Equipment Index
|
|
$
|
117.06
|
|
$
|
122.50
|
|
$
|
159.63
|
|
$
|
88.67
|
|
$
|
122.59
|
|
The
graph and table above are not "soliciting material," are not deemed filed with the SEC and are not to be incorporated by reference in any filing of ours under the Securities Act of
1933, as amended, or the Securities Exchange Act of 1934, as amended, which we refer to herein as the Exchange Act, whether made before or after the date hereof and irrespective of any general
incorporation language in any such filing.
49
Table of Contents
Item 6. SELECTED FINANCIAL DATA
The following selected consolidated financial data should be read in conjunction with "Management's Discussion and Analysis of
Financial Condition and Results of Operations" and our financial statements and related notes to those statements and other financial information included elsewhere in this annual report on
Form 10-K. Historical results are not necessarily indicative of future results.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Year Ended December 31,
|
|
2009
|
|
2008
|
|
2007
|
|
2006
|
|
2005
|
|
(in thousands, except per share amounts)
|
|
|
|
|
|
|
|
|
|
|
|
|
Statement of Operations Data:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Revenue:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product sales
|
|
$
|
30,888
|
|
$
|
28,842
|
|
$
|
26,483
|
|
$
|
22,787
|
|
$
|
18,484
|
|
|
|
Licensing and collaborative revenue
|
|
|
555
|
|
|
416
|
|
|
417
|
|
|
104
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total revenue
|
|
|
31,443
|
|
|
29,258
|
|
|
26,900
|
|
|
22,891
|
|
|
18,484
|
|
|
Costs and expenses:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Costs of product sales
|
|
|
7,682
|
|
|
7,686
|
|
|
7,768
|
|
|
6,958
|
|
|
6,303
|
|
|
|
Research and development
|
|
|
3,415
|
|
|
3,305
|
|
|
2,342
|
|
|
2,290
|
|
|
2,359
|
|
|
|
Sales
|
|
|
10,636
|
|
|
10,374
|
|
|
7,671
|
|
|
7,550
|
|
|
5,792
|
|
|
|
Marketing
|
|
|
5,243
|
|
|
6,514
|
|
|
5,290
|
|
|
3,699
|
|
|
2,473
|
|
|
|
General, administrative and patent
|
|
|
7,839
|
|
|
7,204
|
|
|
6,439
|
|
|
5,561
|
|
|
4,219
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total costs and expenses
|
|
|
34,815
|
|
|
35,083
|
|
|
29,510
|
|
|
26,058
|
|
|
21,146
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Loss from operations
|
|
|
(3,372
|
)
|
|
(5,825
|
)
|
|
(2,610
|
)
|
|
(3,167
|
)
|
|
(2,662
|
)
|
|
Other income (expense):
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Interest income
|
|
|
8
|
|
|
375
|
|
|
1,017
|
|
|
938
|
|
|
225
|
|
|
|
Interest expense
|
|
|
(6
|
)
|
|
(9
|
)
|
|
(17
|
)
|
|
(15
|
)
|
|
(15
|
)
|
|
|
Other
|
|
|
38
|
|
|
96
|
|
|
(244
|
)
|
|
(80
|
)
|
|
(442
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Loss before income taxes
|
|
|
(3,332
|
)
|
|
(5,363
|
)
|
|
(1,854
|
)
|
|
(2,324
|
)
|
|
(2,894
|
)
|
|
|
Income tax benefit (provision)
|
|
|
658
|
|
|
(129
|
)
|
|
|
|
|
|
|
|
93
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net loss
|
|
|
(2,674
|
)
|
|
(5,492
|
)
|
|
(1,854
|
)
|
|
(2,324
|
)
|
|
(2,801
|
)
|
|
|
Preferred stock dividends
|
|
|
(578
|
)
|
|
(578
|
)
|
|
(557
|
)
|
|
(525
|
)
|
|
(495
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Net loss applicable to common stockholders
|
|
$
|
(3,252
|
)
|
$
|
(6,070
|
)
|
$
|
(2,411
|
)
|
$
|
(2,849
|
)
|
$
|
(3,296
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic and diluted net loss per common share applicable to common stockholders
|
|
$
|
(0.18
|
)
|
$
|
(0.34
|
)
|
$
|
(0.14
|
)
|
$
|
(0.17
|
)
|
$
|
(0.22
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic and diluted weighted average number of common shares outstanding
|
|
|
18,044
|
|
|
17,983
|
|
|
17,647
|
|
|
17,027
|
|
|
14,653
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
As of December 31,
|
|
2009
|
|
2008
|
|
2007
|
|
2006
|
|
2005
|
|
(in thousands)
|
|
|
|
|
|
|
|
|
|
|
|
|
Balance Sheet Data:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cash, cash equivalents and marketable securities
|
|
$
|
18,088
|
|
$
|
18,239
|
|
$
|
23,579
|
|
$
|
22,119
|
|
$
|
8,774
|
|
|
Working capital
|
|
|
21,254
|
|
|
21,919
|
|
|
26,555
|
|
|
24,719
|
|
|
10,832
|
|
|
Total assets
|
|
|
30,447
|
|
|
30,228
|
|
|
34,759
|
|
|
32,079
|
|
|
17,495
|
|
|
Long-term debt and deferred revenue
|
|
|
431
|
|
|
8
|
|
|
80
|
|
|
190
|
|
|
101
|
|
|
Stockholders' equity
|
|
|
23,647
|
|
|
24,746
|
|
|
29,109
|
|
|
26,965
|
|
|
13,088
|
|
50
Table of Contents
Item 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The following discussion of our financial condition and results of operations should be read in conjunction
with our consolidated financial statements and the related notes included elsewhere in this report. Some of the information contained in this discussion and analysis and set forth elsewhere in this
report, including information with respect to our plans, strategy and expectations for our business, financial condition and operations, includes forward-looking statements that involve risks and
uncertainties. You should review the section titled "Item 1ARisk Factors" for a discussion of important factors that could cause actual results to differ materially from the
results described in or implied by the forward-looking statements contained in the following discussion and analysis.
Overview
We develop, manufacture and market products for medical procedures that use embolotherapy. Embolotherapy is the minimally invasive,
image-guided therapeutic introduction of various biocompatible substances into a patient's circulatory system to occlude a blood vessel, either to arrest or prevent hemorrhaging or to devitalize or
destroy the structure by occluding its blood supply. Our core technologies consist of patented bioengineered polymers, which are chemical compounds created through the application of medical science,
engineering principles and manufacturing methods. These core technologies are used to produce miniature spherical embolic particles, or microspheres, that are designed to have uniquely beneficial
properties for a variety of medical applications. We currently market and sell four microsphere products:
-
-
Embosphere Microspheres
, which are marketed for symptomatic uterine
fibroids, hypervascularized tumors and arteriovenous malformations, in the United States, the European Union, the People's Republic of China and several other foreign markets;
-
-
EmboGold Microspheres
, which are marketed for hypervascularized tumors and
arteriovenous malformations in the United States, the European Union and several other foreign markets;
-
-
HepaSphere Microspheres
, which are marketed in the European Union, Brazil
and Russia for primary and metastatic liver cancer, and in the European Union and Russia for drug delivery in the treatment of primary and metastatic liver cancer; and
-
-
QuadraSphere Microspheres
, which are marketed for the treatment of
hypervascularized tumors and arteriovenous malformations in the United States.
On
April 16, 2009, we entered into an international distribution agreement with Nippon Kayaku Co., Ltd., or Nippon Kayaku. The agreement grants Nippon Kayaku the
exclusive right to distribute our HepaSphere Microspheres and Embosphere Microspheres in Japan. The agreement provides that Nippon Kayaku is responsible for filing, obtaining and maintaining all
regulatory approvals necessary for the sale, marketing, pricing and reimbursement of the products in Japan, including performing any
clinical trials required as a result of seeking such regulatory approvals in Japan. Assuming product approval, we will provide HepaSphere Microspheres and Embosphere Microspheres to Nippon Kayaku for
distribution and sale in Japan. Additionally, Nippon Kayaku has made a nonrefundable milestone payment of $1.00 million in 2009, which will be recognized as collaborative revenue ratably over
the expected term of the research and development period, and has agreed to make up to $3.00 million in additional milestone payments based upon specified objectives, including achievement of
clinical, regulatory and sales goals. For the year ended December 31, 2009, we recognized approximately $236,000 as collaborative revenue relating to the Nippon Kayaku agreement.
On
September 15, 2009, we entered into a settlement agreement with the plaintiff in a product liability lawsuit filed against us and other previously dismissed defendants in the
matter captioned
Brett Pingel by next friend Dawn LaRose v. BioSphere Medical, Inc., Bruce Kirke Bieneman, M.D., St. Louis
51
Table of Contents
University Hospital, John Stith, M.D. and St. Louis University.
The parties agreed to settle the case without any admission of liability. We maintain product liability
insurance, and our insurer agreed to pay the full amount of the settlement.
On
March 24, 2010, we entered into a settlement agreement with the plaintiff in a product liability lawsuit filed against us and other defendants in the matter captioned
Hamid Rashidi v. Franklin Moser, M.D.,
Cedars-Sinai Medical Center and Biosphere Medical, Inc.
The parties agreed to
settle the case without any admission of liability. We maintain product liability insurance, and our insurer has agreed to pay the full amount of the settlement.
Our
QuadraSphere Microspheres are identical in all respects to our HepaSphere Microspheres. However, FDA regulations require that we conduct clinical trials and submit a marketing
application which includes positive data from the clinical trials to the Unites States Food and Drug Administration, or FDA, in order to obtain the approvals and clearances required to promote
QuadraSphere Microspheres for the treatment of a specific disease or condition, including primary liver cancer. European Union regulations do not require preclearance clinical trials for this class of
medical device on an indication-by-indication basis. In October 2009, we submitted to the FDA an investigational device exemption, or IDE, application to commence a
clinical trial to compare the effectiveness of our QuadraSphere Microspheres combined with the chemotherapeutic agent doxorubicin against conventional transarterial chemoembolization with doxorubicin
in patients with primary liver cancer. The FDA has advised us that our study protocol will need to include survival as a primary endpoint for the trial, rather than overall tumor response rate at six
months, which was the primary endpoint that we proposed in our initial IDE application. Our satisfactory resolution of the FDA's comments on the IDE is a condition to starting the clinical trial. We
are currently evaluating the FDA's protocol requirements for the trial, including how the primary endpoint requirements will affect our plans regarding the size of the trial and the timeline and cost
for completion. We have not reached a conclusion about whether or when to undertake the clinical trial.
For
the years ended December 31, 2009 and 2008, we primarily generated revenue from product sales of our embolic products in North America and the European Union. We also
recognized revenue from product sales in other geographic territories, including the Middle East, Africa, South America and Asia. Product revenue also includes the sale of accessory embolotherapy
devices such as our EmboCath
®
Plus Infusion Microcatheter, Sequitor
®
Steerable
Guidewire and Segway
®
Guidewire, as well our barium delivery kits and other ancillary medical devices sold during the first half of 2008
exclusively in Europe. We derive a majority of our revenue in the United States and the European Union from the sale of Embosphere Microspheres for use in the treatment of uterine fibroids, using a
procedure called uterine fibroid embolization, or UFE. Although we have not received approval or clearance from the FDA to market our QuadraSphere Microspheres for primary or metastatic liver cancer,
we believe that some physicians are using QuadraSphere Microspheres in the treatment of primary and metastatic liver cancer. For the years ended December 31, 2009 and 2008, we also derived a
small portion of our revenue from our licensing of nonstrategic technology to a third party.
Our
strategic priorities are to accelerate our revenue growth by expanding the market for the minimally invasive treatment of symptomatic uterine fibroids using UFE and broadening
treatment options for other medical conditions for patients and physicians.
We
have experienced operating losses in each period since our inception. As of December 31, 2009, we had $18.09 million in cash, cash equivalents and marketable securities,
and an accumulated deficit of $93.38 million. Most of our expenditures to date have been for sales and marketing activities, general and administrative expenses and research and development
activities. We expect to continue to incur operating losses in 2010 as we seek to execute on our business plan, including continuing to establish sales and marketing capabilities for our products and
conducting research and development activities. Prior to 1999, we were engaged in chromatography programs that we divested in 1999. Of the
52
Table of Contents
cumulative
operating loss at the end of 2009, $31.54 million was related to chromatography and $61.84 million was related to embolotherapy platform development.
Research and Development
Research and development expense as a percentage of total revenue for the years ended December 31, 2009, 2008 and 2007 was 11%,
11% and 9%, respectively. Research and development expense in these periods relate primarily to:
-
-
efforts to develop improved manufacturing processes for our currently marketed products;
-
-
research to identify and evaluate new and innovative embolotherapy products based on our platform microsphere technology,
including a smaller-sized HepaSphere Microsphere and QuadraSphere Microsphere designed to allow for delivery into smaller vasculature, which is in preclinical development;
-
-
efforts to develop a new generation of steerable guidewire to augment and/or replace our current guidewire product
offerings; and
-
-
further preclinical testing and nonclinical trials to support initial and/or additional clinical indications and/or
premarketing approvals for our Embosphere Microspheres, HepaSphere Microspheres, QuadraSphere Microspheres, Sequitor Steerable Guidewire and EmboCath Plus Infusion Microcatheter, all of which are
currently approved and marketed for specified indications and in specified geographic locations.
In
the first quarter of 2009, a third-party developer delivered a working prototype relating to a new process for the manufacture of Embosphere Microspheres. We evaluated the new process
and at this time are not proceeding with plans to implement although we may choose to implement in the future.
Our
research and development functions typically work on a number of projects concurrently. In addition, except for clinical expenses, a substantial amount of fixed research and
development costs such as salary and salary-related benefits, facility costs, equipment depreciation and maintenance are shared among various programs. Accordingly, we have not historically tracked
specific costs for each of our research and development projects.
We
cannot reasonably estimate or know the nature, timing and estimated costs of the efforts necessary to complete the development of any of our product candidates that are currently in
development, or the period in which material net cash inflows are expected to commence from any of our product candidates that are currently in development or from any of our currently marketed
products for which we are seeking expanded marketing approvals or clearance in selected indications or geographic regions, due to the numerous risks and uncertainties associated with developing and
commercializing medical devices, including uncertainties relating to:
-
-
the technical risks in new product research and development;
-
-
the timing, scope, rate of progress and cost of clinical trials and other research and development activities undertaken
by us;
-
-
future clinical trial results;
-
-
publicity with respect to our products or their indications;
-
-
the cost, timing and success of regulatory approvals or clearance;
-
-
the cost, timing and success of establishing sales, marketing and distribution capabilities;
53
Table of Contents
-
-
the cost of establishing clinical and commercial supplies of our product candidates and any products that we may develop;
-
-
market acceptance of our approved products;
-
-
the effect of competing technological and market developments; and
-
-
the cost of filing, prosecuting, defending and enforcing any patent claims and other intellectual property rights.
Any
failure to complete the development of our product candidates in a timely manner, or at all, could have a material adverse effect on our operations, financial position and liquidity.
A discussion of the risks and uncertainties associated with completing our projects on schedule, or at all, and some consequences of failing to do so, is set forth in "Part I,
Item 1ARisk Factors."
Critical Accounting Policies and Estimates
The discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements,
which have been prepared in accordance with accounting principles generally accepted in the United States, or GAAP. The preparation of these financial statements requires us to make estimates and
judgments that affect the reported amounts of assets and liabilities, revenue and expenses, and related disclosure at the date of our financial statements. We believe that the application of
accounting policies relating to revenue recognition, stock-based compensation, accounts receivable, inventories, long-lived assets, income taxes and investments which are important to our
financial position and results of operations, require significant judgments and estimates on the part of management. For a more detailed explanation of the judgments made in these areas, refer to
Note 2 of the notes to our consolidated financial statements.
We recognize revenue when products are shipped and the customer or distributor takes ownership and assumes risk of loss, collection of
the relevant receivable is reasonably assured, persuasive evidence of an arrangement exists, for example, a valid purchase order from an approved customer, the sales price is fixed or determinable,
payment is not contingent on resale and we do not have any continuing obligations to ensure resale. Revenue from licensing agreements generally is recognized ratably over the research and development
period. We establish reserves for potential sales returns and evaluate the adequacy of those reserves based upon realized experience and expectations. Reductions to our reserves are offset against
revenue. Any significant change in credit
returns could have a material adverse impact on our revenue and operating results for the period or periods in which such returns materialize.
We measure the cost of employee services in exchange for equity awards based on the grant-date of an award and recognize
the cost over the requisite service period. We recognize compensation expense on fixed awards with graded vesting on a straight-line basis over the awards' vesting period.
We
estimate the fair value of each option on the date of grant using the Black-Scholes option-pricing model, which requires the consideration of several subjective assumptions, including
the expected dividends on our common stock, the expected volatility of our common stock, the risk-free interest rate for the expected option term and the expected term of the option.
Equity instrument valuation models, such as the Black-Scholes valuation model, are highly subjective. Any significant changes in any of our estimates and judgments, including those used to select the
inputs for the Black-Scholes valuation model, could have a significant impact on the fair value of the equity instruments granted or sold and the associated compensation charge, if any, we record in
our financial statements.
54
Table of Contents
In
2009, 2008 and 2007, the weighted average assumptions used in the option pricing models were as follows:
|
|
|
|
|
|
|
|
|
|
|
|
|
For the Years Ended December 31,
|
|
|
|
2009
|
|
2008
|
|
2007
|
|
Dividend yield
|
|
|
0
|
%
|
|
0
|
%
|
|
0
|
%
|
Expected volatility
|
|
|
68
|
%
|
|
65
|
%
|
|
68
|
%
|
Risk-free interest rate
|
|
|
2.33
|
%
|
|
2.79
|
%
|
|
4.41
|
%
|
Expected term (years)
|
|
|
6.16
|
|
|
5.67
|
|
|
5.79
|
|
Because
share-based compensation expense recognized in our consolidated statements of operations is based on awards ultimately expected to vest, it has been reduced for estimated
forfeitures. If factors change and we employ different assumptions in future periods, the compensation expense that we record may differ significantly from what we have recorded in the current year.
We continuously monitor collections from our customers and maintain a provision for estimated credit losses based upon our historical
payment experience and any specific
customer collection issues that we have identified. While such credit losses have historically been within our expectations and the provisions established, we cannot guarantee that we will continue to
experience the same credit loss rates that we have in the past. Substantially all of our receivables are due from hospitals, distributors, health care clinics, and managed care systems located
throughout the United States, Canada, Europe, Asia and South America. A significant portion of products sold, both foreign and domestic, is ultimately funded through government reimbursement programs.
As a consequence, changes in these programs can have an adverse impact on our operating results and cash flows.
We value our inventory at the lower of the actual cost to purchase or manufacture the inventory or the net realizable market value for
such inventory. We regularly review inventory quantities in process and on hand and record a provision for production loss and obsolete inventory based primarily on actual loss experience and on our
estimated forecast of product demand. A significant decrease in demand could result in an increase in the amount of excess inventory quantities on hand. In the future, if our inventory is determined
to be overvalued, we would be required to recognize such costs in our costs of product sales at the time of such determination. Although we make every effort to ensure the accuracy of our production
process and forecasts of future product demand, any significant unanticipated changes in production yield or product demand could have a significant impact on the value of our inventory and our
reported operating results.
Goodwill represents the difference between the purchase price and the fair value of the tangible and identifiable intangible assets
acquired net of liabilities assumed when accounted for in accordance with the purchase method of accounting. Between February 1999 and November 2001, we recorded goodwill upon the step acquisition of
BioSphere Medical SA, or BMSA.
We
perform impairment reviews of our goodwill annually or whenever events or changes in circumstances indicate that the carrying value of the assets may not be recoverable. Goodwill was
derived from the step acquisition of BMSA, our consolidated subsidiary that holds the license to the embolotherapy platform device that is the main focus of our business. In performing the review, we
utilize the two-step approach. The first step requires a comparison of the carrying value of the reporting units, as defined, to the fair value of these units. If the carrying value of a
reporting unit
55
Table of Contents
exceeds
its fair value, we will perform the second step of comparing the implied fair value of the reporting unit's goodwill to its carrying value. For purposes of performing the goodwill impairment
review, management considers there to be one reporting unit. Based upon our review, we have not recorded any impairment charges.
Long-lived assets are recorded at cost and amortized over their estimated useful lives. We are required to evaluate our
long-lived assets for potential impairment whenever events or changes in circumstances may indicate that the carrying amount of a recorded asset may not be recoverable. If the carrying
amount of a long-lived asset exceeds its fair value, an impairment loss is recognized. We believe that the carrying value of our long-lived assets was realizable as of
December 31, 2009.
We use the asset and liability accounting method whereby deferred tax assets and liabilities are recognized based on temporary
differences between the amount recorded in the financial statements and the tax bases of such assets and liabilities using current statutory tax rates. A valuation allowance against net deferred tax
assets is recorded if, based on the available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized.
We
are subject to income tax in numerous jurisdictions at various rates worldwide, and the use of estimates is required in determining the tax provision and valuation allowance against
net deferred tax assets. We have substantial net operating loss carryforwards, or NOL, that have generated significant deferred tax assets in our tax jurisdictions. Due to the size of the net
operating loss carryforward in relation to our history of unprofitable operations, we historically have not recognized any of our net deferred tax assets. However, future improvements in our
operational performance in a tax jurisdiction
or significant changes in any of our estimates and judgments, including the operating profitability of our French subsidiary, if any, could increase the certainty of our ability to apply our deferred
tax assets against taxable income, which, if so applied, could have a significant impact on the valuation of our deferred tax assets and our reported operating results.
We review our financial investments in debt and equity securities for other-than-temporary impairments. If an
impairment exists and we intend to sell the security or it is more likely than not that we will sell the debt or equity security before recovery, the impairment is considered
other-than-temporary and the entire amount of the impairment shall be recognized in earnings. Additionally, if an impairment of a debt security exists and it is more likely
than not that we will not sell the debt security before recovery of its cost basis, but it is probable that we will be unable to collect all amounts due according to the contractual terms of the
security, the impairment is considered other-than-temporary. The amount of the impairment related to credit losses would be recognized in earnings and the amount of the
impairment related to other factors, such as changes in interest rates, would be recognized in other comprehensive income. During the year ended December 31, 2009, we sold two asset-backed
securities at a loss of approximately $52,000, of which we already recognized an approximate $21,000 other-than-temporary decline as of December 31, 2008.
56
Table of Contents
Results of Operations
Years Ended December 31, 2009 and 2008
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For the Years Ended December 31,
|
|
|
|
|
|
|
|
Increase/
(Decrease) ($)
|
|
Increase/
(Decrease) (%)
|
|
(in thousands)
|
|
2009
|
|
2008
|
|
Total revenue
|
|
$
|
31,443
|
|
$
|
29,258
|
|
$
|
2,185
|
|
|
7
|
%
|
Costs of product sales
|
|
|
7,682
|
|
|
7,686
|
|
|
(4
|
)
|
|
0
|
%
|
|
|
|
|
|
|
|
|
|
|
|
Gross margin
|
|
$
|
23,761
|
|
$
|
21,572
|
|
$
|
2,189
|
|
|
10
|
%
|
|
|
|
|
|
|
|
|
|
|
|
Gross margin %
|
|
|
76
|
%
|
|
74
|
%
|
|
2
|
%
|
|
|
|
Revenue.
Total revenue increased for the year ended December 31, 2009 as compared to the year ended December 31, 2008,
primarily due to
an increase in sales of our microsphere products for interventional
gynecology and interventional oncology procedures offset by decreases in the sales of gastric products. Specifically:
-
-
product revenue from sales of our microspheres for use in interventional gynecology for UFE increased
$1.00 million, or 5%, from the year ended December 31, 2008, primarily on higher sales of our Embosphere Microspheres in the United States. During the year ended December 31,
2009, sales of our microsphere products in the United States increased $824,000, or 5%, primarily resulting from a price increase. We believe that the high rate of unemployment in the United States
during 2009, which has reduced demand for elective procedures such as UFE, has had the most significant impact on our UFE sales, resulting in flat sales volumes as compared to the year ended
December 31, 2008. Sales outside the United States increased $176,000, or 5%, due to increased demand in the People's Republic of China and Brazil, offset by changes in foreign exchange rates,
which decreased sales by approximately $154,000.
-
-
product revenue from microsphere sales used in interventional oncology increased $1.73 million, or 32%, from the
year ended December 31, 2008 due to increased sales in all of our geographic regions. During the year ended December 31, 2009, sales of our microsphere products for use in interventional
oncology in the United States increased $923,000, or 25%. Sales of these products outside the United States increased $804,000, or 51%, principally due to increased sales from our HepaSphere
Microspheres product in Europe totaling $475,000 and to increased demand in the People's Republic of China and Brazil totaling $322,000. We believe the increase in HepaSphere Microsphere sales in
Europe included distributor stocking orders of approximately $300,000 resulting from the required pre-notification in our distributor agreements of a HepaSphere Microsphere price increase,
which took effect in January 2010.
In
addition, revenue increased during the year ended December 31, 2009, as compared to 2008, due to increased sales of our delivery systems. Product revenue from the sales of our
delivery system products increased $139,000, or 11%, from the year ended December 31, 2008, on increased demand for our EmboCath Plus catheter in the United States and our Sequitor Guidewire
outside the United States.
Also
included in total revenue for the years ended December 31, 2009 and 2008 is $555,000 and $416,000, respectively, of revenue from our licensing of non-strategic
technology to a third party and collaborative agreements. During 2009, we recognized $236,000 of revenue related to the $1.00 million nonrefundable payment we received upon signing of a
distribution agreement with Nippon Kayaku for the exclusive distribution of our embolic products in Japan. In 2008, licensing revenue related to certain patent technologies licensed to a third party.
57
Table of Contents
Offsetting the increase in revenue noted above is the effect of changes in foreign exchange rates. During the year ended December 31, 2009, as compared to
the same period in 2008, revenue decreased $255,000 due to changes in foreign exchange rates as revenue from our French operations decreased due to the strengthening of the U.S. dollar versus the
euro, which averaged 1.39 dollars to the euro during 2009, compared to 1.46 dollars to the euro during 2008.
Offsetting
the increase in revenue noted above was the decrease in sales of nonstrategic gastric products, which totaled $822,000 in 2008. We phased out nonstrategic products in 2008.
Gross Margin.
The gross margin improvement of 2% as a percentage of revenue for 2009 as compared to 2008 was primarily attributable to
a favorable
mix of product sales, resulting from the phase-out of certain non-strategic products during 2008. Sales from our embolic and delivery system products, which have higher gross
margins than our non-strategic products, represented 98% of overall sales during the year ended December 31, 2009, an increase of 2% as compared to the year ended
December 31, 2008.
We
expect that future gross margin will be highly correlated with the following factors:
-
-
revenue growth;
-
-
mix of products sold and mix of geographic location of sales;
-
-
production levels;
-
-
foreign exchange rate movements;
-
-
terms and conditions of subcontracted manufacturer and supplier agreements; and
-
-
future inventory reserve requirements.
Expense Overview
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For the Years Ended December 31,
|
|
|
|
|
|
|
|
Increase/
(Decrease) ($)
|
|
Increase/
(Decrease) (%)
|
|
(in thousands)
|
|
2009
|
|
2008
|
|
Research and development
|
|
$
|
3,415
|
|
$
|
3,305
|
|
$
|
110
|
|
|
3
|
%
|
Sales
|
|
|
10,636
|
|
|
10,374
|
|
|
262
|
|
|
3
|
%
|
Marketing
|
|
|
5,243
|
|
|
6,514
|
|
|
(1,271
|
)
|
|
(20
|
)%
|
General and administrative
|
|
|
7,058
|
|
|
6,499
|
|
|
559
|
|
|
9
|
%
|
Patent
|
|
|
781
|
|
|
705
|
|
|
76
|
|
|
11
|
%
|
|
|
|
|
|
|
|
|
|
|
|
|
Total operating expenses
|
|
$
|
27,133
|
|
$
|
27,397
|
|
$
|
(264
|
)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Research and Development Expense.
Total research and development expense in the year ended December 31, 2009 increased slightly
over the year
ended December 31, 2008, due primarily to the increase in development activities. In the fourth quarter of 2009, we submitted an IDE application to the FDA seeking to commence a
multi-site clinical trial of our QuadraSphere Microspheres loaded with doxorubicin for treatment of primary liver cancer. During 2009, we incurred approximately $314,000 related to filing
and preparation activities relating to this IDE application. In addition, we conducted a study comparing our Embosphere Microsphere product to a competitor's product and the cost of the study was
approximately $225,000. The increases in 2009 were offset by a change in exchange rates, which resulted in a decrease in the U.S. dollar value of expenses at our facility in France. In 2008, we
performed various small scale studies that totaled approximately $377,000.
Sales Expense.
Sales expense for the year ended December 31, 2009 increased over the year ended December 31, 2008, primarily
due to the
addition of resources to manage our distributor relationships in our emerging markets. Our emerging markets territories consist of Asia, Central
58
Table of Contents
America,
South America, Pacific Rim and Canada. During 2009, we hired a full time sales person to manage our distributors in Asia and we utilized a part-time sales person to manage
existing relationships and to support our expansion in Central and South America.
Marketing Expense.
Marketing expense for the year ended December 31, 2009 decreased from the year ended December 31, 2008,
primarily
due to a reduction in national marketing events combined with a smaller presence at medical association conferences. In 2009, we did not continue our Ask4/Tell4 and associated national public
relations campaigns, which resulted in a decrease of expenses of approximately $775,000. In addition, we decreased our conference participation in the United States and Europe as we had a smaller
presence at the 2009 Cardiovascular and Interventional Radiological Society of Europe, or CIRSE, Global Embolization Symposium and Technologies, or GEST, and Society of Interventional Radiology, or
SIR, conferences, which resulted in a $375,000 decrease in expenses compared to 2008.
General and Administrative Expense.
General and administrative expense for 2009 increased 9% from the year ended December 31, 2008,
primarily
due to an increase in business development activities and to a higher estimated management incentive bonus on improved performance against financial and individual targets.
Patent Expense.
Patent expense for 2009 increased 11% from the year ended December 31, 2008, primarily due to costs associated
with a review
of our patent portfolio performed during 2009, offset by a reduction in the initial registrations of our drug delivery intellectual property as compared to 2008.
Interest Income.
Interest income decreased to $8,000 in the year ended December 31, 2009 from $375,000 in the year ended
December 31,
2008. The decrease in 2009 as compared to 2008 was due primarily to lower interest rates on available investment-grade assets.
Foreign Exchange Gains (Losses).
Foreign exchange gains and losses primarily resulted from euro-to-U.S. dollar currency
fluctuations on euro-denominated short-term intercompany trade accounts. Such foreign exchange gains during the year ended December 31, 2009 totaled approximately
$69,000, compared to the foreign exchange gains of approximately $113,000 in the comparable period of 2008.
Income tax benefit (provision).
During 2009, we received approximately $658,000 in research and development tax credits related to
research and
development activities performed at our French facility from 2004 through 2009. In 2009, we received $411,000 in cash refunds from the French tax authorities as a portion of the credits were monetized
under an economic stimulus program enacted by the French government. During the third quarter of 2009, we conducted a study of these research and development tax credits and determined the benefit of
these credits could be recognized in our financial statements. As of December 31, 2009, $77,000 in outstanding research and development tax credits related to 2005 have been included in other
current assets, as they were not received by the French tax authorities until 2010. An additional $170,000 in tax credits related to 2009 has been included in other long-term assets.
Years Ended December 31, 2008 and 2007
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For the Years Ended December 31,
|
|
|
|
|
|
|
|
Increase/
(Decrease) ($)
|
|
Increase/
(Decrease) (%)
|
|
(in thousands)
|
|
2008
|
|
2007
|
|
Total revenue
|
|
$
|
29,258
|
|
$
|
26,900
|
|
$
|
2,358
|
|
|
9
|
%
|
Costs of product sales
|
|
|
7,686
|
|
|
7,768
|
|
|
(82
|
)
|
|
(1
|
)%
|
|
|
|
|
|
|
|
|
|
|
|
Gross margin
|
|
$
|
21,572
|
|
$
|
19,132
|
|
$
|
2,440
|
|
|
13
|
%
|
|
|
|
|
|
|
|
|
|
|
|
Gross margin %
|
|
|
74
|
%
|
|
71
|
%
|
|
3
|
%
|
|
|
|
59
Table of Contents