Form 10-Q - Quarterly report [Sections 13 or 15(d)]

United States

Securities and Exchange Commission

Washington, D.C. 20549

FORM 10-Q

☒	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934

	For the quarterly period ended May 31, 2023

☐	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934

	For the transition period from ___________ to __________

Commission File No. 000-54768

Loop Industries, Inc.

(Exact name of Registrant as specified in its charter)

Nevada		27-2094706
(State or other jurisdiction of incorporation or organization)		(I.R.S. Employer Identification No.)

480 Fernand-Poitras Terrebonne, Québec, Canada J6Y 1Y4

(Address of principal executive offices zip code)

Registrant’s telephone number, including area code (450) 951-8555

Securities registered pursuant to Section 12(b) of the Act: None

Securities registered pursuant to Section 12(g) of the Act:

Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Common Stock	LOOP	Nasdaq Global Market

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files) Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer	☐	Accelerated filer	☐
Non-accelerated filer	☒	Smaller reporting company	☒
		Emerging growth company	☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes ☐ No ☒

As at July 11, 2023, there were 47,521,187 shares of the Registrant’s common stock, par value $0.0001 per share, outstanding.

LOOP INDUSTRIES, INC.

TABLE OF CONTENTS

		Page No.
PART I. Financial Information

Item 1.	Financial Statements		F-1
Item 2.	Management’s Discussion and Analysis of Financial Condition and Results of Operations		3
Item 3.	Quantitative and Qualitative Disclosures About Market Risk		17
Item 4.	Controls and Procedures		17

PART II. Other Information

Item 1.	Legal Proceedings		18
Item 1A.	Risk Factors		18
Item 2.	Unregistered Sales of Equity Securities and Use of Proceeds		19
Item 3.	Defaults Upon Senior Securities		19
Item 4.	Mine Safety Disclosures		19
Item 5.	Other Information		19
Item 6.	Exhibits		20

	Signatures		21

Table of Contents

PART I. FINANCIAL INFORMATION

ITEM 1. FINANCIAL STATEMENTS

Loop Industries, Inc.

Three months ended May 31, 2023

Index to the Unaudited Interim Condensed Consolidated Financial Statements

Contents		Page(s)

Condensed consolidated balance sheets as at May 31, 2023 (Unaudited) and February 28, 2023		F‑2

Condensed consolidated statements of operations and comprehensive loss for the three months ended May 31, 2023 and 2022 (Unaudited)		F‑3

Condensed consolidated statements of changes in stockholders’ equity for the three months ended May 31, 2023 and 2022 (Unaudited)		F‑4

Condensed consolidated statements of cash flows for the three months ended May 31, 2023 and 2022 (Unaudited)		F‑5

Notes to the condensed consolidated financial statements (Unaudited)		F‑6

F-1

Table of Contents

Loop Industries, Inc.

Condensed Consolidated Balance Sheets

(Unaudited)

(in thousands of U.S. dollars, except per share data)	As at
	May 31, 2023			February 28, 2023

Assets
Current assets
Cash and cash equivalents	$	21,970		$	29,591
Restricted cash		1,000			1,000
Sales tax, tax credits and other receivables (Note 3)		1,158			1,075
Inventories (Note 4)		871			727
Deposits on machinery and equipment (Note 5)		5,430			3,395
Prepaid expenses and other deposits (Note 5)		710			636
Total current assets		31,139			36,424
Investment in joint venture		381			381
Property, plant and equipment, net (Note 6)		2,446			2,545
Intangible assets, net (Note 7)		1,278			1,210
Total assets	$	35,244		$	40,560

Liabilities and Stockholders’ Equity
Current liabilities
Accounts payable and accrued liabilities (Note 9)	$	3,828		$	2,510
Customer deposits		1,000			1,012
Current portion of long-term debt (Note 10)		208			62
Total current liabilities		5,036			3,584
Long-term debt (Note 10)		3,098			3,240
Total liabilities		8,134			6,824

Stockholders’ Equity
Series A Preferred stock par value $0.0001; 25,000,000 shares authorized; one share issued and outstanding		-			-
Common stock par value $0.0001; 250,000,000 shares authorized; 47,521,187 shares issued and outstanding (February 28, 2023 – 47,469,224) (Note 12)		5			5
Additional paid-in capital		170,725			170,370
Additional paid-in capital – Warrants		20,385			20,385
Accumulated deficit		(162,884	)		(155,883	)
Accumulated other comprehensive loss		(1,121	)		(1,141	)
Total stockholders’ equity		27,110			33,736
Total liabilities and stockholders’ equity	$	35,244		$	40,560

Commitments (Note 17)

See accompanying notes to the condensed consolidated financial statements.

F-2

Table of Contents

Loop Industries, Inc.

Condensed Consolidated Statements of Operations and Comprehensive Loss

(Unaudited)

(in thousands of U.S. dollars, except per share data)	Three Months Ended
	May 31, 2023			May 31, 2022
Revenue from contracts with customers	$	27		$	-

Expenses :
Research and development (Note 13)		4,490			6,800
General and administrative (Note 14)		2,465			11,037
Depreciation and amortization (Notes 6 and 7)		133			139
Total expenses		7,088			17,976

Other (income) loss :
Interest and other financial expenses		54			41
Interest income		(99	)		(13	)
Foreign exchange (gain) loss		(15	)		2
Total other (income) loss		(60	)		30
Net loss		(7,001	)		(18,006	)

Other comprehensive loss -
Foreign currency translation adjustment		20			(5	)
Comprehensive loss	$	(6,981	)	$	(18,011	)
Net loss per share
Basic and diluted	$	(0.15	)	$	(0.38	)
Weighted average common shares outstanding
Basic and diluted		47,516,104			47,400,571

See accompanying notes to the condensed consolidated financial statements.

F-3

Table of Contents

Loop Industries, Inc.

Condensed Consolidated Statement of Changes in Stockholders’ Equity

(Unaudited)

(in thousands of U.S. dollars, except for share data)	Three months ended May 31, 2022
	Common stock				Preferred stock						Additional					Accumulated
	par value $0.0001				par value $0.0001				Additional		Paid-in					Other			Total
	Number of Shares		Amount		Number of Shares		Amount		Paid-in Capital		Capital – Warrants		Accumulated Deficit			Comprehensive Income (Loss)			Stockholders’ Equity
Balance, February 28, 2022		47,388,056	$	5		1	$	-	$	150,397	$	30,272	$	(134,583	)	$	(96	)	$	45,995
Issuance of shares upon the vesting of restricted stock units (Note 15)		12,653		-		-		-		-		-		-			-			-
Stock options issued for services (Note 15)		-		-		-		-		317		-		-			-			317
Restricted stock units issued for services (Note 15)		-		-		-		-		8,149		-		-			-			8,149
Foreign currency translation		-		-		-		-		-		-		-			(5	)		(5	)
Net loss		-		-		-		-		-		-		(18,006	)		-			(18,006	)
Balance, May 31, 2022		47,400,709	$	5		1	$	-	$	158,863	$	30,272	$	(152,589	)	$	(101	)	$	36,450

(in thousands of U.S. dollars, except for share data)	Three months ended May 31, 2023
	Common stock				Preferred stock						Additional					Accumulated
	par value $0.0001				par value $0.0001				Additional		Paid-in					Other			Total
	Number of Shares		Amount		Number of Shares		Amount		Paid-in Capital		Capital – Warrants		Accumulated Deficit			Comprehensive Income (Loss)			Stockholders’ Equity
Balance, February 28, 2023		47,469,224	$	5		1	$	-	$	170,370	$	20,385	$	(155,883	)	$	(1,141	)	$	33,736
Issuance of shares upon the vesting of restricted stock units (Note 15)		51,963		-		-		-		-		-		-			-			-
Stock options issued for services (Note 15)		-		-		-		-		162		-		-			-			162
Restricted stock units issued for services (Note 15)		-		-		-		-		193		-		-			-			193
Foreign currency translation		-		-		-		-		-		-		-			20			20
Net loss		-		-		-		-		-		-		(7,001	)		-			(7,001	)
Balance, May 31, 2023		47,521,187	$	5		1	$	-	$	170,725	$	20,385	$	(162,884	)	$	(1,121	)	$	27,110

See accompanying notes to the condensed consolidated financial statements.

F-4

Table of Contents

Loop Industries, Inc.

Condensed Consolidated Statements of Cash Flows

(Unaudited)

(in thousands of U.S. dollars)	Three Months Ended May 31,
	2023			2022
Cash Flows from Operating Activities
Net loss	$	(7,001	)	$	(18,006	)
Adjustments to reconcile net loss to net cash used in operating activities:
Depreciation and amortization (Notes 6 and 7)		133			139
Stock-based compensation expense (Note 15)		355			8,466
Accretion and accrued interest expenses (Note 10)		17			40
Changes in operating assets and liabilities:
Sales tax and tax credits receivable (Note 3)		(83	)		594
Inventories (Note 4)		(144	)
Prepaid expenses (Note 5)		(90	)		(870	)
Accounts payable and accrued liabilities (Note 9)		1,321			(2,012	)
Customer deposits		(12	)		-
Net cash used in operating activities		(5,504	)		(11,649	)

Cash Flows from Investing Activities
Deposits on machinery and equipment (Note 5)		(2,023	)		73
Additions to intangible assets (Note 7)		(99	)		(69	)
Net cash used in investing activities		(2,122	)		4

Cash Flows from Financing Activities
Repayment of long-term debt (Note 10)		(16	)		-
Net cash (used) provided by financing activities		(16	)		-

Effect of exchange rate changes		21			(15	)
Net decrease in cash		(7,621	)		(11,660	)
Cash, cash equivalents and restricted cash, beginning of period		30,591			44,061
Cash, cash equivalents and restricted cash, end of period	$	22,970		$	32,401

Supplemental Disclosure of Cash Flow Information:
Income tax paid	$	-		$	-
Interest paid	$	21		$	-
Interest received	$	99		$	13

See accompanying notes to the condensed consolidated financial statements.

F-5

Table of Contents

Loop Industries, Inc.

Three Months Ended May 31, 2023 and 2022

Notes to the Condensed Consolidated Financial Statements

(Unaudited)

1. The Company and Basis of Presentation

The Company

Loop Industries, Inc. (the “Company,” “Loop,” “we,” or “our”) is a technology company that owns patented and proprietary technology that depolymerizes no and low-value waste polyethylene terephthalate (“PET”) plastic and polyester fiber to its base building blocks (monomers). The monomers are filtered, purified and polymerized to create virgin-quality Loop™ branded PET resin suitable for use in food-grade packaging and polyester fiber. The Company is currently in the pre-commercialization stage with limited revenues.

Basis of Presentation

These unaudited interim condensed consolidated financial statements have been prepared in conformity with generally accepted accounting principles in the United States of America (“US GAAP”) and applicable rules and regulations of the U.S. Securities and Exchange Commission (“SEC”) regarding interim financial reporting. Certain information and note disclosures included in these unaudited interim condensed consolidated financial statements should be read in conjunction with the consolidated financial statements and notes included in the Company’s Annual Report on Form 10-K for the fiscal year ended February 28, 2023, filed with the SEC on May 18, 2023. The unaudited interim condensed consolidated financial statements comprise the consolidated financial position and results of operations of Loop Industries, Inc. and its subsidiaries, Loop Innovations, LLC and Loop Canada Inc. All subsidiaries are, either directly or indirectly, wholly owned subsidiaries of Loop Industries, Inc. (collectively, the “Company”). The Company also owns, through Loop Innovations, LLC, a 50% interest in a joint venture, Indorama Loop Technologies, LLC, which is accounted for under the equity method.

Intercompany balances and transactions are eliminated on consolidation. The condensed consolidated balance sheet as of February 28, 2023, included herein, was derived from the audited financial statements as of that date, but does not include all disclosures including certain notes required by US GAAP on an annual reporting basis. In the opinion of management, the accompanying unaudited interim condensed consolidated financial statements present fairly the financial position, results of operations, comprehensive loss and cash flows for the interim periods. The results for the three months ended May 31, 2023 are not necessarily indicative of the results to be expected for any subsequent quarter, for the fiscal year ending February 29, 2024, or for any other period.

The consolidated financial statements of the Company have been prepared on a going concern basis, which contemplates the continuing of operations, the realization of assets and the settlement of liabilities in the normal course of business.

All monetary amounts in these notes to the condensed consolidated financial statements are in thousands of U.S. dollars unless otherwise specified, except for per share data.

F-6

Table of Contents

2. Summary of Significant Accounting Policies

Liquidity Risk Assessment

Since its inception, the Company has been in the pre-commercialization stage with limited revenues from customers, and its ongoing operations and commercialization plans have been financed primarily by raising equity. The Company has incurred net losses and negative cash flow from operating and investing activities since its inception and expects to incur additional net losses while it continues to develop and plan for commercialization. As at May 31, 2023, the Company’s available liquidity was $24,543, consisting of cash and cash equivalents of $21,970 and an undrawn senior loan facility from a Canadian bank of $2,573. Management actively monitors the Company’s cash resources against the Company’s short-term cash commitments to ensure the Company has sufficient liquidity to fund its costs for at least twelve months from the financial statement issuance date. Management evaluates the Company’s liquidity to determine if there is substantial doubt about the Company’s ability to continue as a going concern. In preparing this liquidity assessment, management applies significant judgment in estimating future cash flow requirements of the Company based on budgets and forecasts, which includes developing assumptions related to: (i) estimation of amount and timing of future cash outflows and inflows and (ii) determining what future expenditures are committed and what could be considered discretionary. Based on this assessment, management believes that the Company will be able to realize its assets and discharge its liabilities in the normal course of operations as they become due for a period of no less than twelve months from the date of issuance of these unaudited interim condensed consolidated financial statements.

The Company’s ability to move to the next stage of its strategic development and construct manufacturing plants is dependent on whether the Company can obtain the necessary financing through a combination of the issuance of debt, equity, and/or joint ventures, and/or government incentive programs, and/or customers. However, there is no assurance that the Company will be successful in attracting additional funding. Even if additional financing is available, it may not be available on terms favorable to the Company. Failure to secure additional financing on favorable terms when it becomes required would have an adverse effect on the Company’s financial position and on its ability to execute its business plan.

The Company has committed $3,116 of its cash resources for certain long lead equipment during the current fiscal year and may enter into additional commitments to accelerate commercial projects within targeted construction timeframes.

Use of estimates

The preparation of financial statements in conformity with US GAAP requires management to use its judgment to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosures of contingent assets and liabilities at the date of the financial statements and the reported amounts of expenses during the reporting period. Actual results could differ from those estimates. Those estimates and assumptions include the going concern assessment, estimates for depreciable lives of property, plant and equipment and intangible assets, recoverability of tax credits receivable, assumptions made in calculating the fair value of stock-based compensation and other equity instruments, and the assessment of performance conditions for stock-based compensation awards.

Net earnings (loss) per share

The Company computes net loss per share in accordance with FASB ASC 260, Earnings Per Share. Basic earnings (loss) per share is computed by dividing the net income (loss) applicable to common stockholders by the weighted average number of shares of common stock outstanding during the year. The Company includes common stock issuable in its calculation. Diluted earnings (loss) per share is computed by dividing the net income (loss) applicable to common stockholders by the weighted average number of common shares outstanding plus the number of additional common shares that would have been outstanding if all dilutive potential common shares had been issued, using the treasury stock method. Potential common shares are excluded from the computation if their effect is antidilutive.

For the three-month periods ended May 31, 2023 and 2022, the calculations of basic and diluted loss per share are the same because potential dilutive securities would have an antidilutive effect. As at May 31, 2023, the potentially dilutive securities consisted of 2,782,000 outstanding stock options (2022 – 1,570,000), 4,306,655 outstanding restricted stock units (2022 – 4,090,775), and 7,089,400 outstanding warrants (2022 – 11,659,418).

F-7

Table of Contents

3. Sales Tax, Tax Credits and Other Receivables

Sales tax, research and development tax credits and other receivables as at May 31, 2023 and February 28, 2023 were as follows:

	May 31, 2023		February 28, 2023
Sales tax	$	243	$	170
Investment tax credits		461		461
Research and development tax credits		428		402
Other receivables		26		42
	$	1,158	$	1,075

4. Inventories

Inventories as at May 31, 2023 and February 28, 2023 were as follows:

	May 31, 2023		February 28, 2023
Finished goods	$	585	$	242
Work in process		245		467
Raw materials		41		18
	$	871	$	727

As at May 31 and February 28, 2023, inventories included finished goods, work in process and raw materials. Finished goods inventories consist of bottle grade and fiber grade Loop^™ PET resin which is intended to be sold to customers. Work in process inventories consist of monomers (dimethyl terephthalate and monoethylene glycol), either purified or yet to be purified, resulting from the depolymerization of PET feedstock. These monomers shall be polymerized into Loop^™ PET resin in the future. Raw materials inventories consist of chemicals which are used as inputs in the PET depolymerization process.

5. Deposits and Prepaid Expenses

As at May 31, 2023, the Company had $5,430 (February 28, 2023 – $3,395) of non-refundable cash deposits on long-lead machinery and equipment that are intended to be used in the first planned Infinite Loop^™ manufacturing facility.

Prepaid expenses and other deposits as at May 31, 2023 and February 28, 2023 were as follows:

	May 31, 2023		February 28, 2023
Insurance	$	545	$	545
Other		165		91
	$	710	$	636

The deposit for insurance represents a pre-payment of the final three months of the Company’s directors’ and officers’ insurance annual premium.

6. Property, Plant and Equipment

	As at May 31, 2023
	Cost		Accumulated depreciation, write-down and impairment			Net book value
Building	$	1,822	$	(324	)	$	1,498
Land		225		-			225
Building and Land Improvements		1,839		(1,247	)		594
Office equipment and furniture		274		(147	)		129
	$	4,160	$	(1,718	)	$	2,446

F-8

Table of Contents

	As at February 28, 2023
	Cost		Accumulated depreciation, write-down and impairment			Net book value
Building	$	1,822	$	(309	)	$	1,513
Land		225		-			225
Building and Land Improvements		1,839		(1,166	)		673
Office equipment and furniture		274		(140	)		134
	$	4,160	$	(1,615	)	$	2,545

Depreciation expense amounted to $101 for the three-month period ended May 31, 2023 (2022 – $119).

7. Intangible Assets

Intangible assets as at May 31, 2023 and February 28, 2023 were $1,278 and $1,210, respectively.

During the three-month periods ended May 31, 2023 and 2022, we made additions relating to patent application costs to intangible assets of $99 and $69, respectively.

Amortization expense for the three-month period ended May 31, 2023 amounted to $32 (2022 – $20).

8. Fair Value of Financial Instruments

The following tables presents the fair value of the Company’s financial liabilities as at May 31, 2023 and February 28, 2023:

	Fair Value as at May 31, 2023
	Carrying Amount		Fair Value		Level in the hierarchy
Financial liabilities measured at amortized cost:
Long-term debt	$	3,306	$	3,283	Level 2

	Fair Value as at February 28, 2023
	Carrying Amount		Fair Value		Level in the hierarchy
Financial liabilities measured at amortized cost:
Long-term debt	$	3,302	$	3,280	Level 2

The fair value of cash and cash equivalents, restricted cash, customer deposits, other receivables, and accounts payable and accrued liabilities approximate their carrying values due to their short-term maturity.

9. Accounts Payable and Accrued Liabilities

Accounts payable and accrued liabilities as at May 31, 2023 and February 28, 2023 were as follows:

	May 31, 2023		February 28, 2023
Trade accounts payable	$	1,534	$	1,020
Accrued machinery and equipment expenses		1,225		-
Accrued employee compensation		581		712
Accrued professional fees		236		410
Accrued engineering fees		55		96
Accrued director compensation		44		44
Other accrued liabilities		153		228
	$	3,828	$	2,510

The accrued machinery and equipment expenses as at May 31, 2023 are related to machinery and equipment to be used at the Company’s Terrebonne Facility.

F-9

Table of Contents

10. Long‑Term Debt

Long-term debt as of May 31, 2023 and February 28, 2023, was comprised of the following:

	May 31, 2023			February 28, 2023
Investissement Québec financing facility:
Principal amount	$	3,372		$	3,380
Unamortized discount		(244	)		(261	)
Accrued interest		178			183
Total Investissement Québec financing facility		3,306			3,302
Less: current portion of long-term debt		(208	)		(62	)
Long-term debt, net of current portion	$	3,098		$	3,240

Investissement Québec financing facility

The Company recorded interest expense on the Investissement Québec loan for the three-month period ended May 31, 2023 in the amount of $21 (2022 – $22) and an accretion expense of $17 (2022 – $18). During the three-month period ended May 31, 2023, the Company made repayments of $16 (2022 – nil) on the Investissement Québec loan.

Total repayments due on the Company’s indebtedness over the next five years are as follows:

Years ending	Amount
February 29, 2024	$	47
February 28, 2025		584
February 28, 2026		584
February 28, 2027		584
February 29, 2028		584
Thereafter		1,167
Total	$	3,550

Credit facility from a Canadian bank

On July 26, 2022, Loop Canada, Inc., a wholly-owned subsidiary of the Company, entered into an Operating Credit Facility (the “Credit Facility”) with a Canadian bank. The Credit Facility allows for borrowings of up to $2,573 in aggregate principal amount and provides for a two-year term. The Credit Facility is secured by the Company’s Terrebonne, Québec property and is subject to a minimum equity covenant, tested quarterly with which the Company was in compliance as at May 31, 2023. All borrowings under the Credit Facility will bear interest at an annual rate equal to the bank’s Canadian prime rate plus 1.0%. The Company is subject to a guarantee of the liabilities of Loop Canada Inc. As at May 31, 2023, the $2,573 Credit Facility was available and undrawn.

11. Related Party Transactions

Employment Agreement

On June 29, 2015, the Company entered into an employment agreement with Mr. Daniel Solomita, the Company’s President and Chief Executive Officer (“CEO”). The employment agreement is for an indefinite term.

On July 13, 2018, the Company and Mr. Solomita entered into an amendment and restatement of the employment agreement which provided for a long-term incentive grant of 4,000,000 shares of the Company’s common stock, in tranches of one million shares each, upon the achievement of four performance milestones. This was modified to provide a grant of 4,000,000 restricted stock units (“RSUs”) covering 4,000,000 shares of the Company’s common stock while the performance milestones remained the same. The grant of the restricted stock units became effective upon approval by the Company’s shareholders at the Company’s 2019 annual meeting, of an increase in the number of shares available for grant under the Plan. Such approval was granted by the Company’s shareholders at the Company’s 2019 annual meeting.

F-10

Table of Contents

On April 30, 2020, the Company and Mr. Solomita entered into an amendment of Mr. Solomita’s employment agreement. The amendment clarified the milestones consistent with the shift in the Company’s business from the production of terephthalate to the production of dimethyl terephthalate, another proven monomer of PET plastic that is simpler to purify. When a milestone becomes probable, the corresponding expense will be valued based on the grant date fair value on April 30, 2020, the date of the last modification of Mr. Solomita’s employment agreement. The closing price of the Company’s common stock on the Nasdaq on April 30, 2020 was $7.74 per share.

During the three-month period ended May 31, 2022, Mr. Solomita met a performance milestone in relation to the signature of a supply agreement with a customer. Accordingly, 1,000,000 performance incentive RSUs with a fair value of $7,740 were earned and issuable to Mr. Solomita. This amount was reflected as stock-based compensation expense during the three-month period ended May 31, 2022. During the three-month period ended May 31, 2023, no outstanding performance milestones were probable of being achieved and, accordingly, the Company did not record any additional stock-based compensation expense.

12. Stockholders’ Equity

Common Stock

For the period ended May 31, 2023	Number of shares		Amount
Balance, February 28, 2023		47,469,224	$	5
Issuance of shares upon settlement of restricted stock units		51,963		-
Balance, May 31, 2023		47,521,187	$	5

For the period ended May 31, 2022	Number of shares		Amount
Balance, February 28, 2022		47,388,056	$	5
Issuance of shares upon settlement of restricted stock units		12,653		-
Balance, May 31, 2022		47,400,709	$	5

During the three months ended May 31, 2023, the Company recorded the following common stock transaction:

(i)	The Company issued 51,963 shares of the common stock to settle restricted stock units that vested in the period.

During the three months ended May 31, 2022, the Company recorded the following common stock transaction:

(i)	The Company issued 12,653 shares of the common stock to settle restricted stock units that vested in the period.

13. Research and Development Expenses

Research and development expenses for the three-month periods ended May 31, 2023 and 2022 were as follows:

	May 31, 2023		May 31, 2022
Employee compensation	$	1,446	$	2,287
Machinery and equipment expenditures		1,236		1,890
External engineering		1,155		1,596
Plant and laboratory operating expenses		469		866
Other		184		161
	$	4,490	$	6,800

F-11

Table of Contents

14. General and Administrative Expenses

General and administrative expenses for the three-month periods ended May 31, 2023 and 2022 were as follows:

	May 31, 2023		May 31, 2022
Employee compensation⁽¹⁾	$	833	$	8,785
Insurance		703		1,103
Professional fees		619		799
Other		310		350
	$	2,465	$	11,037

(1)	Includes stock-based compensation expense. During the three-month period ended May 31, 2022, the Company recorded a stock-based compensation expense of $7,740 related to the achievement of a performance milestone for 1,000,000 RSUs (Note 11).

15. Share-based Payments

Stock Options

The following tables summarizes the continuity of the Company’s stock options during the three-month periods ended May 31, 2023 and 2022:

	2023				2022
	Number of stock options		Weighted average exercise price		Number of stock options		Weighted average exercise price
Outstanding, beginning of period		2,542,000	$	5.27		1,570,000	$	6.87
Granted		240,000		3.11		-		-
Exercised		-		-		-		-
Forfeited		-		-		-		-
Expired		-		-		-		-
Outstanding, end of period		2,782,000	$	5.08		1,570,000	$	6.87
Exercisable, end of period		1,670,000	$	6.84		1,336,667	$	7.65

The Company applies the fair value method of accounting for stock-based compensation awards granted. Fair value is calculated based on a Black-Scholes option pricing model. There were no new issuances of stock options for the three-month period ended May 31, 2022. The principal components of the pricing model for the stock options granted in the three-month period ended May 31, 2023 were as follows:

Exercise price	$	3.11
Risk-free interest rate		3.84	%
Expected dividend yield		0	%
Expected volatility		79	%
Expected life	3 years

During the three-month periods ended May 31, 2023 and 2022, stock-based compensation expense attributable to stock options amounted to $162 and $317, respectively.

Restricted Stock Units

The following table summarizes the continuity of the restricted stock units during the three-month periods ended May 31, 2023 and 2022:

	2023					2022
	Number of units			Weighted average fair value price		Number of units			Weighted average fair value price
Outstanding, beginning of period		3,888,618		$	7.09		4,018,567		$	7.42
Granted		470,000			2.87		84,861			6.00
Settled		(51,963	)		8.66		(12,653	)		13.04
Forfeited		-			-		-			-
Outstanding, end of period		4,306,655		$	6.61		4,090,775		$	7.37
Outstanding vested, end of period		1,568,497		$	6.31		1,530,313		$	6.14

F-12

Table of Contents

The Company applies the fair value method of accounting for awards granted through the issuance of restricted stock units. Fair value is calculated based on the intrinsic value at grant date multiplied by the number of restricted stock unit awards granted.

During the three-month periods ended May 31, 2023 and 2022, stock-based compensation attributable to RSUs amounted to $193 and $8,149, respectively. During the three-month period ended May 31, 2022, the Company recorded a stock-based compensation expense of $7,740 related to the achievement of a performance milestone for 1,000,000 RSUs (Note 11).

Stock-Based Compensation Expense

During the three-month periods ended May 31, 2023 and 2022, stock-based compensation included in research and development expenses amounted to $159 and $396, respectively, and in general and administrative expenses amounted to $196 and $8,070, respectively. The amount recorded in general and administrative expenses for the three-month period ended May 31, 2022 includes $7,740 related to the achievement of a performance milestone for 1,000,000 RSUs (Note 11).

16. Equity Incentive Plan

On July 6, 2017, the Company adopted the 2017 Equity Incentive Plan (the “Plan”). The Plan permits the granting of warrants, stock options, stock appreciation rights and restricted stock units to employees, directors and consultants of the Company. A total of 3,000,000 shares of common stock were initially reserved for issuance under the Plan at July 6, 2017, with annual automatic share reserve increases, as defined in the Plan, amounting to the lessor of (i) 1,500,000 shares, (ii) 5% of the outstanding shares on the last day of the immediately preceding fiscal year, or (iii) or such number of shares determined by the Administrator of the Plan, effective March 1, 2018. On March 1, 2023, the share reserve was increased by 1,500,000 shares. On March 1, 2022, the Board of Directors opted to waive the annual share reserve increase. The Plan is administered by the Board of Directors who designates eligible participants to be included under the Plan, the number of awards granted, the share price pursuant to the awards and the vesting conditions and period. The awards, when granted, will have an exercise price of no less than the estimated fair value of shares at the date of grant and a life not exceeding 10 years from the grant date. However, where a participant, at the time of the grant, owns stock representing more than 10% of the voting power of the Company, the life of the options shall not exceed 5 years.

The following table summarizes the continuity of the Company’s Equity Incentive Plan units that were authorized for issuance as at and during the three-month periods ended May 31, 2023 and 2022:

	2023			2022
	Number of units*			Number of units*
Authorized, beginning of period		120,486			1,043,705
Automatic share reserve increase		1,500,000			-
Units granted		(710,000	)		(84,861	)
Units forfeited		-			-
Units expired		-			-
Authorized, end of period		910,486			958,844

*The use of the term “units” in the table above describes a combination of stock options and RSUs.

17. Commitments

Agreement to purchase of machinery and equipment

In December 2021, the Company entered into an agreement for the purchase of long lead machinery and equipment in connection with the construction of our first Infinite Loop^™ manufacturing facility for up to $8,546, subject to various terms and conditions, including fabrication timelines and equipment inspection. Pursuant to the agreement, the Company has paid cash deposits of $5,430 (Note 5). The balance is expected to be paid by the end of this fiscal year.

Agreement with SK Geo Centric Co. Ltd. (“SKGC”)

On April 27, 2023, the Company and SKGC entered into an agreement to build Infinite Loop manufacturing facilities in Asia. Pursuant to the agreement, the Company and SKGC agreed to form a new entity, which will be headquartered in Singapore. SKGC will contribute 51% and Loop will contribute the remaining 49% of the initial equity capital of the new entity. The Company’s investment in the new entity will be accounted for under the equity method and initially recognized at cost.

F-13

Table of Contents

ITEM 2. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following information and any forward-looking statements should be read in conjunction with the unaudited financial information and the notes thereto included in this Quarterly Report on Form 10-Q, including those risks identified in the “Risk Factors” section of our most recent Annual Report on Form 10-K.

CAUTIONARY STATEMENTS REGARDING FORWARD-LOOKING STATEMENTS

This Quarterly Report on Form 10-Q of Loop Industries, Inc., a Nevada corporation (the “Company,” “Loop,” “we,” or “our”), contains “forward-looking statements,” as defined in the United States Private Securities Litigation Reform Act of 1995. In some cases, you can identify forward-looking statements by terminology such as “may,” “will,” “should,” “could,” “expects,” “plans,” “intends,” “anticipates,” “believes,” “estimates,” “predicts,” “potential,” or “continue,” or the negative of such terms and other comparable terminology. These forward-looking statements include, without limitation, statements about our market opportunity, our strategies, ability to improve and expand our capabilities, competition, expected activities and expenditures as we pursue our business plan, the adequacy of our available cash resources, regulatory compliance, plans for future growth and future operations, the size of our addressable market, market trends, and the effectiveness of the Company’s internal control over financial reporting. Although we believe that the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee future results, levels of activity, performance, or achievements. Actual results may differ materially from the projections discussed in these forward-looking statements. The economic environment within which we operate could materially affect our actual results. Forward-looking statements are inherently subject to risks and uncertainties, some of which cannot be predicted or quantified. These risks and other factors include, but are not limited to, those listed under “Risk Factors.” Additional factors that could materially affect these forward-looking statements and/or projections include, among other things: (i) commercialization of our technology and products, (ii) our status of relationship with partners, (iii) development and protection of our intellectual property and products, (iv) industry competition, (v) our need for and ability to obtain additional funding relative to our current and future financial commitments, (vi) engineering, contracting, and building our manufacturing facilities, (vii) our ability to scale, manufacture, and sell our products in order to generate revenues, (viii) our proposed business model and our ability to execute thereon, (ix) adverse effects on the Company’s business and operations as a result of increased regulatory, media, or financial reporting scrutiny, practices, rumors, or otherwise, (x) disease epidemics and other health-related concerns and crises, which could result in reduced access to capital markets, supply chain disruptions and scrutiny, embargoing of goods produced in affected areas, government-imposed mandatory business closures and any resulting furloughs of our employees, government employment subsidy programs, travel restrictions or the like to prevent the spread of disease, or market or other changes that could result in non-cash impairments of our intangible assets, and property, plant and equipment, (xi) the effect of the continuing worldwide macroeconomic uncertainty and its impacts, including inflation, market volatility and fluctuations in foreign currency exchange and interest rates, (xii) the outcome of any SEC investigations or class action litigation filed against us, (xiii) our ability to hire and/or retain qualified employees and consultants, (xiv) other events or circumstances over which we have little or no control, and (xv) other factors discussed in our subsequent filings with the SEC.

Management has included projections and estimates in this Form 10-Q, which are based primarily on management’s experience in the industry, assessments of our results of operations, discussions and negotiations with third parties, and a review of information filed by our competitors with the SEC or otherwise publicly available.

In addition, statements that “we believe” and similar statements reflect our beliefs and opinions on the relevant subject. These statements are based upon information available to us as at the date of this Form 10-Q, and while we believe such information forms a reasonable basis for such statements, such information may be limited or incomplete, and should not be read to indicate that we have conducted an exhaustive inquiry into, or review of, all potentially available relevant information. These statements are inherently uncertain, and investors are cautioned not to unduly rely upon these statements.

We caution readers not to place undue reliance on any such forward-looking statements, which speak only as at the date made. We disclaim any obligation subsequently to revise any forward-looking statements to reflect events or circumstances after the date of such statements or to reflect the occurrence of anticipated or unanticipated events.

Table of Contents

General

As used in this Quarterly Report on Form 10-Q, the following terms are being provided so investors can better understand our business:

Depolymerization refers to the chemical process of breaking down a polymer molecule into its constituent monomers or smaller subunits. Depolymerization is the opposite of polymerization.

DMT is an acronym for dimethyl terephthalate, which is a monomer used in the production of polyethylene terephthalate (“PET”).

MEG is an acronym for monoethylene glycol, which is a monomer used in the production of PET.

Polymerization refers to a process of reacting monomer molecules together in a chemical reaction to form polymer chains or three-dimensional networks.

PET is an acronym for polyethylene terephthalate, which is a resin and a type of polyester showing excellent tensile and impact strength, chemical resistance, clarity, and processability, and reasonable thermal stability. PET is the material which is most commonly used for the production of polyester fiber and plastic packaging, including plastic bottles for water and carbonated soft drinks, containers for food and other consumer products; it is commonly identified by the number “1”, often inside an image of a triangle, on the packaging. PET is also used as a polyester fiber for a variety of applications including textiles, clothing and apparel.

rPET is an acronym for recycled polyethylene terephthalate.

All monetary amounts in this Quarterly Report on Form 10-Q are in thousands of U.S. dollars unless otherwise specified, except for per share data.

Introduction

Loop is a technology company whose mission is to accelerate the world’s shift towards sustainable PET plastic and polyester fiber and away from our dependence on fossil fuels. Loop owns patented and proprietary technology that depolymerizes no and low-value waste PET plastic and polyester fiber, including plastic bottles and packaging, carpets and textiles of any color, transparency or condition and even ocean plastics that have been degraded by the sun and salt, to its base building blocks (monomers). The monomers are filtered, purified and polymerized to create virgin-quality Loop^™ branded PET resin suitable for use in food-grade packaging and polyester fiber, thus enabling our customers to meet their sustainability objectives. Loop is contributing to the global movement towards a circular economy by reducing and recovering plastic waste for a sustainable future.

The Company is presently in the planning stages of pursuing the construction of Infinite Loop™ commercial scale facilities. Loop is currently engaged in discussions to secure financing for its investments in the various planned manufacturing facilities and the sequencing of the manufacturing facilities will be determined in conjunction with the outcome of the Company’s financing discussions and discussions with our partners.

Background

Industry Background

We believe Loop's depolymerization technology offers a complementary solution to mechanical recycling by enabling the use of a wider variety of PET feedstock, including complex and degraded plastics as well as polyester fiber, to produce virgin quality rPET with no degradation through continued recycling.

Mechanically recycled PET plastic is produced principally through the conversion of bales of PET bottles. The materials have been collected and transported to a materials recovery facility, where they are sorted from other materials, baled, and sent to specific PET recycling facilities. The bales are broken and sorted to remove any non-PET materials. The PET is then ground and put through a separation process which separates the PET from the bottle cap and label materials. Clean PET flake is then further processed depending on its intended end market. It may become more highly refined PET pellets for new bottles or extruded into PET sheet for clamshells, trays, and cups. Recycled PET is also spun into fiber for carpet, clothing, fiber fill, or other materials.

Table of Contents

We believe mechanically recycled PET faces a number of challenges in meeting the quality specifications and growing volume requirements implied by commitments from major brands, mainly due to the cost and variety of acceptable PET feedstock. Some mechanical recycling processes involve remelting the PET flake which reduces the quality of the rPET output each time it is recycled relative to the specifications of virgin PET produced from fossil fuels. Each time PET plastic is mechanically recycled, its quality and clarity are reduced. Therefore, mechanically recycled PET may need to be mixed with virgin PET from fossil fuels to maintain quality. Lower quality mechanically recycled PET is often downcycled to alternate uses such as polyester fibers which may be dyed and used in carpets or clothing. Additionally, mechanically recycled PET manufactured for use in clear bottles or food containers requires predominantly clear and clean PET flakes separated from waste bales, and cannot accommodate colored or opaque PET flakes, lower quality fiber feedstock, or materially contaminated feedstock, which may be cheaper.

Depolymerization is a process in which plastics are broken down into their constituent molecules through chemical reactions, rather than being physically melted down and reprocessed as in mechanical recycling. This approach, which we utilize, has several advantages over mechanical recycling, which can have limitations due to the complexity and diversity of plastics.

One of the main limitations of mechanical recycling is that it is difficult to recycle plastics that have been contaminated or degraded. For example, if a plastic container has been exposed to heat or sunlight, it may become brittle and prone to breaking during the recycling process. Another limitation of mechanical recycling is that it is difficult to recycle certain types of plastics, such as multi-layered or composite plastics. These plastics are often used in food packaging or other products that require specialized properties like barrier protection or insulation. Depolymerization, however, can break down these degraded or complex plastics into their constituent molecules, which can then be purified and used to create new products.

Loop’s depolymerization technology has the potential to create a closed-loop system for plastic waste, whereby plastics can be recycled an infinite number of times without degrading the quality of the material. This is because the constituent molecules can be broken down and reassembled without losing their original properties, which can reduce the need for new plastics to be produced.

We believe Loop’s depolymerization technology offers a promising solution to the limitations of mechanical recycling by enabling the recirculation of more diverse and complex plastics, reducing waste and pollution, and creating a closed-loop system for plastic waste.

Our depolymerization technology breaks down waste PET into DMT and MEG. The monomers are purified and then recombined into virgin quality PET plastic and polyester fiber. We use low value PET plastic and polyester fiber waste as feedstock. Our technology can process PET plastic bottles and packaging of any color, transparency or condition, carpet, clothing and other polyester textiles that may contain colors, dyes or additives, and even PET plastics that have been recovered from the ocean and degraded by exposure to sun and salt. We believe that our ability to use many materials that mechanical recyclers cannot process is an important advantage of Loop^™ PET resin and further expands the range of PET waste streams that may be recycled. This also means we are creating a new market for materials that have persistently been leaking out of the waste management system and into shared rivers, oceans and natural areas.

Supply Agreements with Global Consumer Brands

In the past years, we have seen major consumer brands make significant commitments to close the loop on their plastic use by transitioning their packaging to recyclable materials like PET, and by incorporating more recycled content into their packaging. We believe Loop^™ PET resin provides the ideal solution for these brands because it is recyclable and is made from 100% recycled PET waste and polyester fiber, while being virgin-quality and suitable for use in food-grade packaging and polyester fiber.

Due to the commitments by large global consumer brands to incorporate more recycled content into their product packaging, the regulatory requirements for minimum recycled content in packaging imposed by governments, the virgin-quality of Loop^™ branded PET resin and its marketability to enhance the sustainability credentials of consumer brands that incorporate it, we believe we will be able to sell Loop^™ branded PET resin at a premium price relative to virgin and mechanically recycled PET resin.

Table of Contents

We currently have agreements with some of the world’s leading brands to be supplied from our planned commercial facilities, including:

	·	Multi-year supply agreement with Danone SA (“Danone”), one of the world’s leading global food and beverage companies, enabling Danone to purchase 100% sustainable and upcycled Loop^™ branded PET for use in brands across its portfolio including evian®, Danone’s iconic natural spring water;

	·	Multi-year supply agreement with L’OCCITANE en Provence (“L’OCCITANE”) to supply 100% recycled and sustainable Loop^™ PET resin and incorporate Loop^™ PET resin into its product packaging; and

	·	Multi-year supply agreement with L’Oréal Group, the global leader in the beauty industry, enabling L’Oréal Group to purchase production capacity and incorporate Loop^™ PET resin into its product packaging.

We also have a signed letter of intent with On AG, a sportswear brand and subsidiary of On Holding AG, to secure volumes of Loop™ PET resin from the Asian Infinite Loop™ manufacturing facility in Ulsan, South Korea, which Loop is planning to construct with its strategic partner SK Geo Centric.

We are pursuing amended supply agreements with existing customers and new agreements with additional customers that are located in North America, Europe, and Asia to sell the production volumes of our planned Infinite Loop^™ commercial facilities.

Strategic Partnership with SK Geo Centric

In June 2021, Loop and SK Geo Centric (“SKGC”) concluded a definitive agreement for SKGC to become a strategic investor in Loop, with SKGC acquiring a 10% stake in Loop at $12.00 per share for a total of $56.5 million. The transaction, which closed in July 2021, also included warrants for SKGC to purchase Loop common stock at $15.00 and $20.00 per share. Concurrent with the strategic investment, Loop and SKGC entered into a memorandum of understanding (“MOU”) to form a joint venture with exclusivity to build sustainable PET plastic and polyester fiber manufacturing facilities throughout Asia.

SKGC is a global chemical company and member of the SK Group, one of South Korea’s largest conglomerates. SKGC is a general energy and chemical leader in the global market and is growing into a technology-based global chemical company through continuous R&D efforts. SKGC aims to achieve its “Green for Better Life” vision by establishing a plastics based circular economy through collaboration with various partners and stakeholders, such as Loop.

Asia represents approximately 60% of the world’s population and 70% of global PET consumption and is the main hub for the polyester fiber supply chain for textiles. The Asian market represents a prime opportunity for Loop’s growth and commercialization of its technology. SKGC is well established with a deep understanding of the Asian market, and vast expertise in building and operating large-scale petrochemical facilities, making them a uniquely well-suited partner for Loop in helping to ensure the successful commercialization of Loop’s technology in this market.

On April 27, 2023, Loop and SKGC entered into a joint venture agreement (the “JV Agreement”) to deploy Loop’s depolymerization technology in the Asian market through multiple commercial manufacturing facilities. Pursuant to the JV Agreement, Loop and SKGC agreed to form a new company (the “JV Company”), which will be headquartered in Singapore. SKGC will contribute 51% and Loop will contribute 49% of the initial equity capital of the JV Company. The JV Agreement outlines that the JV Company will have exclusive rights to commercialize Loop’s technology in the Asian market and Loop will receive an annual royalty fee for each of the commercial plants.

The first planned commercial manufacturing facility with Infinite Loop™ technology, located in Ulsan, South Korea, will have an annual capacity to supply 70,000 metric tons per year of Loop™ PET resin for packaging and polyester fiber applications, and is anticipated to break ground in 2023 and to have construction completed by the end of 2025. In addition to Infinite Loop™ Ulsan, the two partners have outlined plans which target a minimum of three additional commercial manufacturing facilities to be constructed throughout Asia by 2030. Loop and SKGC have partnered with SK ecoengineering, a subsidiary of the SK Group that brings considerable experience and proficiency as an EPC contractor, for the engineering and construction of the commercial manufacturing facilities.

Table of Contents

Infinite Loop^™ Europe

We announced on September 10, 2020 a strategic partnership with SUEZ Group (“Suez”), with the objective to build the first Infinite Loop^™ manufacturing facility in Europe. On June 16, 2022, Loop, together with Suez and SKGC, announced that the three companies will become equal participants in the strategic partnership.

The expanded partnership intends to combine SKGC's petrochemical manufacturing experience with Suez's resource management expertise and Loop’s breakthrough proprietary technology to supply up to 70,000 M/T of virgin quality, 100% recycled PET plastic and polyester fiber to the European market. The planned Infinite Loop™ facility will offer a solution to consumer goods companies which have committed to goals for significantly increased use of recycled content in their products and/or packaging and help to meet the growing demand for recycled PET resin and polyester fiber.

On February 16, 2023, the three companies announced that the Chemesis industrial platform in Saint-Avold, located in the Grand Est region of France, has been selected as the site for their planned manufacturing facility in Europe. We are working with our partners Suez and SKGC on acquiring the project site, alignment of various levels of government support and additional steps for the project which include advancing permitting, site specific engineering, customer offtake contracts, feedstock and financing.

Product activations with evian, L’Occitane, On AG, and Garnier

Loop has collaborated with multiple customers in recent and upcoming launches for products and product packaging incorporating Loop™ PET manufactured from monomers produced at the Terrebonne Facility.

In 2021, Loop, in partnership with iconic global beverage brand evian, unveiled a new “evian Loop” prototype virgin-quality water bottle made from 100% recycled content. The monomers used to produce the evian Loop bottles were made at the Terrebonne Facility. Evian began selling water bottles made from Loop^™ PET in South Korea in October 2022. The waste plastic used to produce these bottles includes polyester fibers from carpets and clothing which are considered unrecyclable and destined for landfill and other natural environments. This initiative reflects evian’s commitment to its stated goal for circularity and 100% recycled content by 2025.

On October 11, 2022, Loop and L’OCCITANE, a global manufacturer and retailer of sustainable beauty and wellness products, unveiled a new bottle for the brand’s Almond Shower Oil that was manufactured with 100% recycled Loop™ PET resin produced using monomers from Loop’s Terrebonne Facility. Loop has partnered with L’OCCITANE to help meet the brand’s sustainability goal of using 100% recycled PET in its bottles by 2025. In partnership with the brand, a pilot project was executed where the bottle (excluding cap and label) was produced using 100% recycled Loop™ PET resin and was successfully carried out on L’OCCITANE production lines. This initiative marks a significant step forward in the partnership between the two companies and sets the pathway to implement Loop’s technology across other products in the brand’s assortment. As part of this partnership with L’OCCITANE, Loop’s branding is featured prominently on the front of the packaging, with additional details speaking to Loop’s technology on the back label.

We also entered into an agreement in May 2022 with On AG to supply Loop^™ PET to be utilized in polyester fiber by the brand, pursuant to which Loop^™ PET resin was delivered in the year ended February 28, 2023.

On April 19, 2023, Loop and Garnier, one of the world’s largest mass market beauty brands, launched the brand’s first Micellar Cleansing Water All-In-1 bottle made of Loop™ PET produced using monomers from Loop’s Terrebonne Facility (excluding cap and label). The Loop logo, featured on the front of this packaging innovation, serves as an anchor to highlight Loop’s technology, the quality of materials and the bottle’s recyclability. The inclusion of Loop branding on the packaging strongly supports Garnier's sustainability goals by promoting the infinitely recyclable potential of the product and brings awareness to PET plastic circularity. This packaging innovation will first be distributed in Garnier’s largest market, the US, and the brand’s home market of France.

Loop continues to pursue opportunities for new activations and marketing campaigns with additional consumer goods brand companies.

Table of Contents

Terrebonne Facility

As part of our plan for the commercialization of future Infinite Loop^™ manufacturing facilities, we enhanced our Terrebonne, Québec pilot plant to become a small-scale PET depolymerization production facility, incorporating all key pieces of depolymerization equipment that will be used in the full-scale commercial facilities. In addition to our research and development activities, this facility is used to deliver initial production volumes to support co-branded market launch campaigns with partners and customers and will also be used to showcase the Infinite Loop^™ end-to-end technology and train operational teams in advance of the commissioning of the Infinite Loop^™ full-scale commercial facilities.

On December 22, 2022, we announced that we had reduced hours of operation at the Terrebonne Facility in order to reduce operating costs and preserve liquidity. The primary purpose of the Terrebonne Facility was to demonstrate that Loop’s breakthrough depolymerization technology was scalable, and also to produce commercial quantities of virgin quality PET resin and polyester fiber for global brands. We believe the Terrebonne Facility has achieved this objective. We will continue to fulfill existing commitments related to ongoing sales contracts.

In the three-month period ended May 31, 2023, 2023, Loop reported revenues of $27 from the sale of Loop™ PET resin produced from monomers manufactured at the Terrebonne Facility to several global consumer brands, including those with whom Loop is collaborating on product launches. In addition to supplying customers with initial volumes of Loop^™ PET, the Terrebonne Facility continues to support our customers and partners with R&D and analytical capabilities.

Market Opportunity

The estimated global annual market demand for PET plastic and polyester fiber is approximately $180 billion. We believe plastic pollution and climate change continue to be the most persistently covered environmental issues by media and local and global environmental non-governmental organizations. Some of the main concerns associated with PET are the greenhouse gas (“GHG”) emissions associated with its production from non-renewable hydrocarbons and the length of time it persists in landfills and the natural environment. There is an increasing demand for action to address the global plastic crisis, as evidenced by the March 2022 endorsement by 175 nations of a historic resolution at the UN Environmental Assembly to end plastic pollution and forge an international legally binding agreement by the end of 2024. In the last few years, governments in North America, Europe and Asia have been enacting and proposing laws and regulations mandating the use of minimum recycled content in packaging, which underlies the strength of this issue in the marketplace. Consumer brands are seeking a solution to their plastic challenge, and they are taking action. In recent years we have seen major brands make significant commitments to close the loop on their plastic packaging by transitioning their packaging to recyclable materials and by incorporating more recycled content into their packaging.

Global consumer packaged goods companies (“CPG companies”), apparel manufacturers, and retail brands have announced significant public commitments and targets to make the transition to a circular plastic economy, for example:

	·	Adidas Group aims to replace all virgin polyester with recycled polyester in all of its Adidas products by 2024;
	·	Danone, the provider of evian® brand bottled water, committed to a goal of using 100% recycled content packaging by 2025;
	·	Coca-Cola committed to an average recycled content of 50% across its packaging by 2030;
	·	PepsiCo stated 10 European markets are moving key Pepsi-branded products to 100% rPET bottles by 2022, and in the U.S., all Pepsi-branded products will be converted to 100% rPET bottles by 2030;
	·	In 2020, L’OCCITANE committed to implementing 100% recycled content plastic in their bottles by 2025;
	·	Nike has announced a 2025 target of diverting 100% of its waste from landfills, with at least 80% recycled back into its products and goods;
	·	L’Oréal Group committed to using 100% recycled or biobased plastic in their packaging by 2030;
	·	Ikea maintains its goal that, by 2030, all plastic used in its products will be based on renewable or recycled material; and
	·	By 2025, Lululemon aims to achieve at least 75% sustainable materials for their products, including fibers that are recycled, renewable, regenerative, sourced responsibly and are manufactured using low-resource processes.

Table of Contents

There is a growing regulatory and policy environment to encourage a reduction in the production of virgin fossil fuel-based plastic and for minimum recycled content in packaging imposed by various governments:

North America:

	o	Canada has announced a goal of zero-plastic waste by 2030 and is targeting for all plastic packaging to contain 50% recycled content by 2030.
	o	California law requires that plastic bottles contain at least 25% post-consumer resin by 2025, and at least 50% by 2030.

Europe:

	o	As of January 2021, the European Union introduced a new tax of €800/ton on non-recycled plastic packaging based on the amount of plastic packaging placed on each member state’s market.
	o	Spain imposed a tax of €450 per ton on non-reusable plastic packaging, effective January 1, 2023.
	o	Italy introduced a tax in January 2023 of €450 per ton on virgin plastic used in manufacture or importation of single use plastic.
	o	Effective April 2022, a new £200/ton tax applies in the UK to plastic packaging produced or imported into the UK that does not contain at least 30% recycled plastic.
	o	France maintains its goal of having 100% plastics recycled by 2025 and 77% of beverage bottles to be collected.

Asia: South Korea continues to target reduction of plastic waste by 20%, an increase in recycling rates from 54% to 70% by 2025, and utilization of 30% renewable plastic by 2030.

The growing regulatory environment combined with global consumer goods companies, apparel manufacturers, and retail brand commitments for 2025 and 2030 are expected to further increase the demand for rPET.

Closed-loop circularity and keeping materials within their own cycle (bottle-to-bottle and fiber-to-fiber) is gaining increasing attention as the focus on sustainability intensifies. Governments and regulators have considered or enacted heightened standards for recycled materials that discourage downcycling of bottles into polyester fiber. Additionally, it is becoming increasingly difficult to secure inventory of post-consumer bottles due to the increased demand from the bottle industry as they strive to achieve their own sustainability goals. A fiber-to-fiber recycling strategy addresses these problems and allows fashion brands and companies to secure volume and support the increasing demand of recycled polyester fiber in the textile industry.

We believe the commercialization plans of Loop^™ PET resin and polyester fiber may provide the ideal solution for global brands because Loop^™ PET resin and polyester fiber contains 100% recycled PET and polyester fiber content. The Loop^™ PET resin and polyester fiber is virgin-quality and is suitable for use in food-grade packaging. That means CPG companies will be able to market packaging made from a 100% recycled Loop^™ branded PET resin and polyester fiber.

Commercialization Strategy

Our objective is to achieve global expansion of Loop’s technology through a mix of fully owned manufacturing facilities, strategic partnerships, and licensing agreements. We believe that industrial companies, some of which today may not be in the business of manufacturing PET resin or polyester fiber, will view involvement with Infinite Loop^™ projects as a significant growth opportunity, which may offer attractive economic returns either as Loop manufacturing partners or as licensees of the technology.

On December 22, 2022, we announced a shift in our commercialization strategy which now focuses on our planned joint venture projects with SKGC in Asia and Europe. These projects have a lower requirement for Loop equity investment and higher expected return on capital, and leverage SKGC’s engineering and operational infrastructure. In addition, the joint venture projects will provide Loop with an annual technology licensing fee. SKGC is committed to commercializing Loop’s technology as the underpinning of its sustainable plastics strategy. Loop is working collaboratively with SKGC to put in place a financing plan for the rollout of large-scale manufacturing in Asia and Europe, including the first Asian manufacturing facility in Ulsan, South Korea, which is anticipated to break ground in 2023 and to have construction completed by the end of 2025.

Table of Contents

The global expansion plan for our technology will allow our customers, mostly comprised of CPG brand companies and apparel companies, to expand the use of Loop^™ PET resin and polyester fiber into their packaging and clothing. As countries around the globe continue to increase sustainability targets and recycled content mandates, our customers are increasing the use of sustainably produced materials into their products.

The Infinite Loop^™ manufacturing technology is the key pillar of our commercialization blueprint. We believe our technology is at the forefront of the global transition away from fossil fuels and petrochemicals and into the circular economy, where PET plastic and polyester fiber are produced by recycling waste plastic rather than depleting finite resources. The Infinite Loop^™ manufacturing technology allows for waste PET plastic and polyester fiber to be broken down into its base building blocks, monomers DMT and MEG, using Loop’s patented technology. Once the monomers are purified, they are then repolymerized into PET plastic or polyester fiber using INVISTA know how, which Loop licenses, and Chemtex Global Corporation’s engineering. The INVISTA polymerization process and the associated designs are historically proven in the commercial production of PET resin and polyester fiber.

We have completed our basic design package for the Infinite Loop^™ full-scale manufacturing facilities. The engineering philosophy we have adopted is “design one, build many.” This approach allows for the basic design package to be used as the base engineering platform for all future geographical expansion. We believe this approach allows for quick execution, speed to market, and lends itself well to modular construction. The basic design package has a capacity of up to 70,000 M/T of PET resin output per year. Permitting, site and regulatory considerations may impact plant capacity.

Our market strategy is to assist global consumer goods brands in meeting their public sustainability commitments by offering co-branded packaging or polyester fibers that are made with Loop, 100% recycled, virgin-quality PET or polyester fibers. We believe that Loop^™ recycled PET resin and polyester fiber could command premium pricing over virgin, petroleum-based PET resin and provide attractive economic returns. We are targeting multi-year take or pay offtake agreements for planned Infinite Loop^™ production. Factors under consideration in determining project economics include the feasibility design engineering and cost estimate work, timing and permitting of a facility, customer offtake demand, commitment terms, and feedstock sources, quality, availability, PET bale index pricing, logistics, and ramp up, among others.

Recent developments

Signature of Venture Agreement with SKGC

The first planned commercial manufacturing facility with Infinite Loop™ technology, located in Ulsan, South Korea, will have an annual capacity to supply 70,000 metric tons per year of Loop™ PET resin for packaging and polyester fiber applications, and is anticipated to break ground in 2023 and to have construction completed by the end of 2025. In addition to Infinite Loop™ Ulsan, the two partners have outlined plans which target a minimum of three additional commercial manufacturing facilities to be constructed throughout Asia by 2030. Loop and SKGC have partnered with SK ecoengineering, a subsidiary of the SK Group who brings considerable experience and proficiency as an EPC contractor, for the engineering and construction of the commercial manufacturing facilities.

Successful completion of SKGC technical due diligence

On March 28, 2023, Loop and SKGC announced the successful completion of a technical due diligence conducted by SKGC. The technical due diligence marks the next phase in Loop and SKGC's long-standing partnership to commercialize Loop’s technology through Infinite Loop™ manufacturing facilities in the Asian market. SKGC executed a comprehensive due diligence to validate Loop’s technology and its production facility in Terrebonne, Quebec. The scope of the technical due diligence included the depolymerization of low value PET waste into its base monomers of DMT and MEG, the purification of the monomers, as well as the polymerization into virgin-quality Loop™ PET resin and polyester fiber. Key parameters of Loop’s technology that were validated were the production yields, operational stability, quality of the output monomers and overall performance of the production facility. The technical due diligence validated that the PET resin and polyester fiber produced using Loop’s technology is of virgin quality. The technical due diligence report, signed by both parties, confirms Loop’s innovative technology.

Table of Contents

Customer product activations

On April 19, 2023, Loop and Garnier, launched the brand’s first Micellar Cleansing Water All-In-1 bottle made of Loop™ PET, which was produced using monomers from Loop’s Terrebonne Facility (excluding cap and label). The Loop logo, featured on the front of this packaging innovation, serves as an anchor to highlight Loop’s technology, the quality of materials and the bottle’s recyclability.

Proprietary Technology and Intellectual Property

We believe the power of our technology lies in its ability to use post-industrial and post-consumer waste PET plastic and polyester fiber feedstocks, which could end up in landfills, rivers, oceans and natural areas, to create Loop^™ PET resin. We believe our technology can deliver high-purity profitable virgin-quality, 100% recycled PET resin suitable for use in food-grade packaging and polyester fiber.

Our Generation II technology (“GEN II”) is a methanolysis-based depolymerization technology that uses temperatures below 90 °C to depolymerize waste PET and polyester fiber. The low temperature offers several key advantages which the Company believes will improve its ability to commercialize the GEN II technology, including;

	·	Lower energy usage during depolymerization, and therefore reduced processing cost and lower GHG emissions relative to higher temperature processes;
	·	Avoidance of side reactions with non-PET waste, which are inherent in waste PET feedstock streams, during depolymerization which may occur during higher temperature and higher pressure depolymerization processes. This allows for a simplified distillation purification process resulting in fewer, and more effective, steps to isolate the desired high purity DMT and MEG monomers suitable to produce virgin-quality PET required to meet food contact regulations as well as the quality and clarity requirements of global consumer product companies;
	·	Allowing the depolymerization of less costly and low-quality feedstocks, which cannot be effectively recycled today, such as carpet fiber, clothing and mixed plastics, and upcycling them into high-quality PET that can be used in food contact use; and
	·	The GEN II technology uses only trace amounts of water, eliminates the need for a halogenated solvent and uses a catalyst at low concentration.

We believe that GEN II requires less energy and fewer resource inputs than conventional PET production processes. We also believe it is an environmentally sustainable method for producing virgin-quality food-grade PET plastic by decoupling PET manufacturing from the fossil fuel industry.

To independently validate that our GEN II technology can produce DMT and MEG monomers at mini-pilot and pilot scale, we commissioned Kemitek, a College Centre for Technology Transfer specialized in the fields of green chemistry and chemical process scale-up. Kemitek’s findings allowed them to confirm that our technology produces monomers that meet our purity specifications for the production of PET resin and polyester fiber. The complete Kemitek report was filed with the SEC by the Company on December 14, 2020.

Additionally, Loop’s strategic partners, Suez and Danone, among others, collectively engaged an independent, globally recognized third-party engineering firm to execute a thorough due diligence and technology validation report. We believe the final report, which was communicated in May 2022, validated and reinforced the quality, effectiveness, and scalability of our technology. Our technology was further validated in March 2023, when Loop and SKGC announced the successful completion of the technical due diligence conducted by SKGC. Key parameters of Loop’s technology that were validated through SKGC’s comprehensive due diligence include the production yields, operational stability, quality of the output monomers and overall performance of Loop’s Terrebonne Facility. The technical due diligence validated that the PET resin and polyester fiber produced using Loop’s technology is of virgin quality.

Table of Contents

To protect our technology and intellectual property rights, we rely on a combination of patents, trademarks, trade secrets, confidentiality agreements and provisions as well as other contractual provisions to protect our proprietary rights, which are primarily our patents, brand names, product designs and marks.

The GEN II technology portfolio currently consists of four patent families:

	·	One family has two issued U.S. patents and a pending U.S. application, all expected to expire on or around September 2037. Internationally, this patent family has four issued or allowed patents in foreign jurisdictions, Bangladesh, Argentina, Taiwan and Brazil, and pending applications in Canada, China, the Eurasian Patent Organization, Europe, the Gulf Cooperation Council, India, Japan, Mexico, South Korea, and various other countries, all expected to expire on or around September 2038, if granted, not including any patent term extensions.
	·	An additional aspect of the GEN II technology, as claimed in two issued U.S. patents and a pending U.S. application, all expected to expire on or around June 2039. Internationally, this patent family includes five issued or allowed patents in foreign jurisdictions, including Morocco, Algeria, Indonesia and Bangladesh, and pending applications in Canada, China, the Eurasian Patent Organization, Europe, the Gulf Cooperation Council, India, Japan, Mexico, South Korea, and various other countries, all expected to expire on or around June 2039, if granted, not including any patent term extensions.
	·	Another aspect of the GEN II technology, which is the subject of an issued U.S. patent and a pending U.S. application. Internationally, this patent family includes pending applications in Canada, Europe, India, Singapore, Papua New Guinea, Brazil, and South Africa. Any patents that would ultimately be granted from this application would be expected to expire on or around March 2040, not including any patent term extensions.
	·	Another aspect of the GEN II technology, which is the subject of an issued U.S. patent and a pending U.S. application, both expected to expire on or around March 2040. Internationally, this patent family includes two issued patents in foreign jurisdictions, Bangladesh and South Africa, and pending applications in Canada, China, Korea, the Eurasian Patent Organization, Europe, the Gulf Cooperation Council, India, Japan, Mexico, and various other countries, all expected to expire on or around March 2040, if granted, not including any patent term extensions.

Loop owns registrations for its trademarks in Cambodia, Canada, the European Union, Taiwan, the United Kingdom, and the U.S. Loop also has pending applications in Canada, Japan, South Korea, the U.S., and Vietnam.

Government Regulation and Approvals

As we seek to further develop and commercialize our technology, we will be subject to extensive and frequently developing federal, state, provincial and local laws and regulations. Compliance with current and future regulations, including food packaging regulations, could increase our operational costs.

Our operations require various governmental permits and approvals. We are in the process of obtaining all necessary permits and approvals for the operation of our business; however, any of these permits or approvals may be subject to denial, revocation or modification under various circumstances. Failure to obtain or comply with the conditions of permits and approvals or to have the necessary approvals in place may adversely affect our operations and may subject us to penalties. See “Risk Factors” below for additional information.

We believe that if we are successful in addressing food packaging regulations in various countries and economic regions, the regulatory environment may provide Loop^™ PET resin a competitive advantage relative to mechanically recycled alternative resins and virgin PET.

Table of Contents

Loop’s PET resin was subjected to independent testing by an external and certified laboratory, which confirmed the PET complies with FDA Regulation 21 CFR § 177.1630 on August 26, 2021, as well as EU Commission Regulation No 10/2011 on July 27, 2021. These results attest that Loop’s PET is safe for use in food-contact applications, including but not limited to bottled water, carbonated drinks and food trays. Demonstration of compliance with food-contact requirements follows the No Objection Letter (“NOL”) from the FDA previously granted to Loop in March 2021. The NOL confirms that Loop’s monomers can produce rPET of a purity suitable for food-contact use, provided it meets the applicable requirements of Title 21 of the Code of Federal Regulations. The monomers used in the PET resin submitted for testing were produced at Loop’s small-scale production facility in Terrebonne, Québec (the “Terrebonne Facility”).

We have received from the European Chemicals Agency a confirmation of registration for our MEG on November 17, 2020, and for our DMT on December 7, 2020. The registration under the Registration, Evaluation, Authorization and Restriction of Chemicals (“REACH”) Regulation (EC 1907/2006) confirms that our monomers are of a purity equal to what is currently recognized within Europe and entitles us to manufacture/import the monomers into Europe. It should be noted that MEG and DMT are on the positive list for plastic materials, which means that the two monomers can be used as food contact materials.

On August 31, 2021, Loop also received a NOL from Health Canada, which states that the PET produced by Loop’s recycling process is suitable for use in the manufacture of water bottles and articles for contact with all food types under all conditions of use.

Human Capital

As of May 31, 2023, we had 73 employees of which 24 work in research and development, 35 in engineering and operations, and 14 in administrative functions.

Table of Contents

Results of Operations

The following table summarizes our operating results for the three-month periods ended May 31, 2023 and 2022, in thousands of U.S. Dollars.

	Three months ended May 31,
	2023			2022			Change
Revenue from contracts with customers	$	27		$	-		$	27

Expenses
Research and development
Machinery and equipment expenditures		1,236			1,890			(654	)
External engineering		1,155			1,596			(441	)
Employee compensation		1,286			1,891			(605	)
Stock-based compensation		160			396			(236	)
Plant and laboratory operating expenses		469			866			(397	)
Other		184			161			23
Total research and development		4,490			6,800			(2,310	)

General and administrative
Professional fees		619			799			(180	)
Employee compensation		637			715			(78	)
Stock-based compensation		196			8,070			(7,874	)
Insurance		703			1,103			(400	)
Other		310			350			(40	)
Total general and administrative		2,465			11,037			(8,572	)

Depreciation and amortization		133			139			(6	)
Interest and other financial expenses		54			41			13
Interest income		(99	)		(13	)		(86	)
Foreign exchange loss		(15	)		2			(17	)
Total expenses		7,028			18,006			(10,978	)
Net loss	$	(7,001	)	$	(18,006	)	$	11,005

First Quarter Ended May 31, 2023

Revenues

Revenues for the three-month period ended May 31, 2023 were $27. For the same period in 2022, there were no revenues. The revenues resulted from the delivery of initial volumes to customers of Loop™ PET resin produced using monomers manufactured at the Terrebonne Facility.

Research and Development

Research and development expense for the three-month period ended May 31, 2023 decreased $2,310 to $4,490, as compared to $6,800 for the same period in 2022. The decrease was primarily attributable to a $654 decrease in purchases of machinery and equipment used at the Terrebonne Facility, a $605 decrease in employee compensation expenses, a $441 decrease in external engineering costs for design work for our Infinite Loop^™ manufacturing process, a $397 decrease in plant and laboratory expenses to operate our Terrebonne Facility, and a $236 decrease in stock-based compensation expenses.

General and administrative expenses

General and administrative expenses for the three-month period ended May 31, 2023 decreased $8,572 to $2,465, as compared to $11,037 for the same period in 2022. The decrease was primarily attributable to a $7,874 decrease in stock-based compensation which is mainly attributable to a $7,740 expense recorded in relation to the achievement of a performance milestone for 1,000,000 RSUs in the three-month period ended May 31, 2022, and a $400 decrease in insurance costs.

Table of Contents

Net Loss

The net loss for the three-month period ended May 31, 2023 decreased $11,005 to $7,001, as compared to $18,006 for the same period in 2022. The decrease is primarily due to the decrease in general and administrative expenses of $8,572, and the $2,310 decrease in research and development expenses.

LIQUIDITY AND CAPITAL RESOURCES

Liquidity

Since its inception, the Company has been in the pre-commercialization stage with limited revenues, with its ongoing operations and commercialization plans financed primarily by raising equity. To date, we have been successful in raising capital to finance our ongoing operations. Our liquidity position consists of cash and cash equivalents on hand of $21,970 at May 31, 2023 and an undrawn senior loan facility from a Canadian bank of $2,573. Our liquidity position is subject to risks and uncertainties, including those discussed under “Cautionary Statements Regarding Forward-Looking Statements” in this Quarterly Report on Form 10-Q and the Risk Factors section included in Part I, Item 1A of our 2023 Annual Report on Form 10-K.

Management actively monitors the Company’s cash resources against the Company’s short-term cash commitments to ensure the Company has sufficient liquidity to fund its costs for at least twelve months from the financial statement issuance date. Management evaluates the Company’s liquidity to determine if there is substantial doubt about the Company’s ability to continue as a going concern. In preparing this liquidity assessment, management applies significant judgment in estimating future cash flow requirements of the Company based on budgets and forecasts which includes developing assumptions related to: (i) estimation of amount and timing of future cash outflows and cash inflows and (ii) determining what future expenditures are committed and what could be considered discretionary. Management prepared the Company’s consolidated financial statements on a going concern basis in accordance with ASC 205-40, as management believes that the Company will be able to realize its assets and discharge its liabilities in the normal course of operations as they become due for a period of no less than 12 months from the date of issuance of these unaudited interim condensed consolidated financial statements.

Management continues to pursue our growth strategy and is evaluating our financing plans to continue to raise capital to finance the start-up of commercial operations and continue to fund our ongoing operations. We will require a significant amount of capital to fund our growth as we invest in our planned commercial facilities in Europe, Asia and North America, as well as additional research and development. In addition to our cash on hand, we may also raise additional capital through equity offerings or debt financings, government incentives, as well as through collaborations or strategic alliances to execute our growth strategy. Such financing will depend on many factors, including actual construction costs of the planned commercial facilities, potential delays in our supply chain, and our ability to secure customers, which may not be available on acceptable terms, if at all. If we are unable to raise additional capital when required, our business, financial condition and results of operations would be adversely affected.

In December 2021, the Company entered into an agreement for the purchase of long lead machinery and equipment for up to $8,546 which can be used in any Infinite Loop™ manufacturing facility. The payment of these amounts is based on certain milestones subject to various terms and conditions, including fabrication timelines, and equipment inspection. Pursuant to the agreement, the Company has paid a cash deposit of $5,430.

We have a long-term debt obligation to Investissement Québec in connection with a financing facility for the expansion of the Terrebonne Facility up to a maximum of $3,382. We received the first disbursement in the amount of $1,624 on February 21, 2020 and the second disbursement in the amount of $1,758 on August 26, 2021. There is a 36-month moratorium on both capital and interest repayments as of the first disbursement date. At the end of the 36-month moratorium, capital and interest will be repayable in 84 monthly installments. The loan bears interest at a rate of 2.36%. We have also agreed to issue to Investissement Québec warrants to purchase shares of our common stock in an amount equal to 10% of each disbursement up to a maximum aggregate amount of $338. The warrants were issued at a price per share equal to the higher of (i) $11.00 per share and (ii) the ten-day weighted average closing price of Loop Industries shares of common stock on the Nasdaq stock market for the 10 days prior to the issue of the warrants. The warrants can be exercised immediately upon grant and have a term of three years from the date of issuance. The loan can be repaid at any time by us without penalty. On February 21, 2020, upon the receipt of the first disbursement under this facility, we issued a warrant to purchase 15,153 shares of common stock at a price of $11.00 to Investissement Québec, which expired in February 2023. On August 26, 2021, upon the receipt of the second disbursement under this facility, we issued a warrant to purchase 17,180 shares of common stock at a price of $11.00 to Investissement Québec, which remains outstanding. There is no remaining amount available under the financing facility after the second disbursement.

Table of Contents

On November 21, 2022, the Company and Investissement Québec entered into an agreement to amend the existing Financing Facility which modifies the repayments of the principal amount (the “the Financing Facility Amendment”). As per the Financing Facility Amendment, a total of $37 of the principal amount is repayable in monthly installments in the fiscal year ending February 29, 2024 and the remainder of the principal amount is repayable in 72 monthly installments. Under the original terms of the Financing Facility, the principal amount was repayable in 84 monthly installments beginning in March of 2023. The Financing Facility Amendment does not modify the interest rates, the repayment terms of accrued interest or any other terms of the Financing Facility.

On July 26, 2022, Loop Canada, Inc., a wholly-owned subsidiary of the Company, entered into an Operating Credit Facility (the “Credit Facility”) with a Canadian bank. The Credit Facility allows for borrowings of up to $2,573 in aggregate principal amount and provides for a two-year term. The Credit Facility is secured by the Company’s Terrebonne, Québec property and is subject to a minimum equity covenant, tested quarterly. All borrowings under the Credit Facility will bear interest at an annual rate equal to the bank’s Canadian prime rate (as defined in the Credit Facility) plus 1.0%. The Company is subject to a guarantee of the liabilities of Loop Canada Inc. As at May 31, 2023, the Credit Facility was undrawn.

Flow of Funds

Summary of Cash Flows

A summary of cash flows for the three months ended May 31, 2023 and 2022 was as follows, in thousands of U.S. Dollars:

	Three Months Ended May 31,
	2023			2022
Net cash used in operating activities	$	(5,504	)	$	(11,649	)
Net cash used in investing activities		(2,122	)		4
Net cash used by financing activities		(16	)		-
Effect of exchange rate changes on cash		21			(15	)
Net (decrease) increase in cash	$	(7,621	)	$	(11,660	)

Net Cash Used in Operating Activities

During the three-month period ended May 31, 2023, we used $5,504 in operations compared to $11,649 during the three-month period ended May 31, 2022. As discussed above in the Results of Operations, the year-over-year decrease is mainly due to decreased operating expenses as we have completed the upgrade of the Terrebonne Facility and our basic design package for the Infinite Loop™ full-scale manufacturing facilities.

Net Cash Used in Investing Activities

During the three months ended May 31, 2023, we used $2,122 in investing activities compared to $4 during the three-month period ended May 31, 2022. During the three months ended May 31, 2023 we made $2,023 in deposits on machinery and equipment for use in a commercial project, and we made investments in intangible assets of $99, particularly in our patent technology in the United States and around the world.

Net Cash (Used) Provided by Financing Activities

During the three months ended May 31, 2023, we repaid $16 of long-term debt.

Table of Contents

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Pursuant to Item 305(e) of Regulation S-K (§ 229.305(e)), the Company is not required to provide the information required by this Item as it is a “smaller reporting company,” as defined by Rule 229.10(f)(1).

ITEM 4. CONTROLS AND PROCEDURES

Management’s Evaluation of our Disclosure Controls and Procedures

A. Evaluation of Disclosure Controls and Procedures

Disclosure controls and procedures are designed to provide reasonable assurance that information required to be disclosed by us in the reports that we file or submit under the Securities Exchange Act of 1934, is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by us in our reports that we file or submit under the Securities Exchange Act of 1934 is accumulated and communicated to our management, including our principal executive and principal financial officers, or persons performing similar functions, as appropriate, to allow timely decisions regarding required disclosure.

As of the end of the period covered by this Quarterly Report, the Company carried out an evaluation, under the supervision and with the participation of the Company’s management, including the Company’s Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of the Company’s “disclosure controls and procedures” (as defined in Rule 13a-15(e) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”)), pursuant to Rule 13a-15(b) of the Exchange Act. Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures were effective as of May 31, 2023.

B. Changes in Internal Control over Financial Reporting

There were no changes in our internal control over financial reporting during the quarter ended May 31, 2023 that materially affected, or were reasonably likely to materially affect, our internal control over financial reporting.

Table of Contents

PART II. OTHER INFORMATION

ITEM 1. LEGAL PROCEEDINGS

SEC Investigation

As previously disclosed, we received a subpoena from the SEC in October 2020 requesting certain information from us, including information regarding testing, testing results and details of results from our GEN I and GEN II technologies, and certain of our partnerships and agreements. In March 2022, we received a second subpoena requesting additional information, including information concerning our reverse-merger in 2015, and communications with certain individuals and entities. There have been no additional information requests from the SEC relating to the Company’s business or technology.

The SEC informed us that its investigation does not mean that the SEC has concluded that anyone has violated the law and that the investigation does not mean that the SEC has a negative opinion of us. We cannot predict when this matter will be resolved or what, if any, action the SEC may take following the conclusion of the investigation.

On September 30, 2022 the SEC filed a complaint (the “SEC complaint”) against several named defendants (“Defendants”), and also identified as a relief defendant Daniel Solomita, our Chief Executive Officer. The SEC complaint does not allege wrongdoing by the Company or Mr. Solomita. The SEC complaint identifies Mr. Solomita and an entity he owns as relief defendants because they purportedly received monies from the Defendants in 2015 that the SEC alleges were derived from the Defendants’ fraud. The SEC complaint does not allege that Mr. Solomita was aware of the alleged wrongdoing by the Defendants and does not allege that he was aware that any alleged monies received were derived from fraud.

Litigation

From time to time, we may become involved in various lawsuits and legal proceedings or investigations which arise in the ordinary course of business. Except as noted above, we are not presently a party to any legal proceedings, government actions, administrative actions, investigations or claims that are pending against us or involve us that, in the opinion of our management, could reasonably be expected to have a material adverse effect on our business, financial condition or operating results. However, litigation is subject to inherent uncertainties, and an adverse result in these or other matters may arise from time to time that may harm our business.

It is possible that we may expend financial and managerial resources in the defense of our intellectual property rights in the future if we believe that our rights have been violated. It is also possible that we may expend financial and managerial resources to defend against claims that our products and services infringe upon the intellectual property rights of third parties.

ITEM 1A. RISK FACTORS

We are subject to various risks and uncertainties in the course of our business. Risk factors relating to us are set forth under “Risk Factors” in our Annual Report on Form 10-K, filed on May 18, 2023. No material changes to such risk factors have occurred during the three months ended May 31, 2023.

Table of Contents

ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

None.

ITEM 3. DEFAULTS UPON SENIOR SECURITIES

None.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

ITEM 5. OTHER INFORMATION

None.

Table of Contents

ITEM 6. EXHIBITS

The following Exhibits, as required by Item 601 of Regulation SK, are attached or incorporated by reference, as stated below.

Exhibit Index

		Incorporated by Reference
Number	Description	Form	File No.	Filing Date	Exhibit No.
3.1	Articles of Incorporation, as amended to date	10-K	000-54768	May 30, 2017	3.1
3.2	By-laws, as amended to date	8-K	000-54768	April 10, 2018	3.1
10.1*	Joint Venture Agreement, dated April 27, 2023, between SK Geo Centric Co., Ltd. and Loop Industries, Inc.		Filed herewith
31.1	Certification of Principal Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.		Filed herewith
31.2	Certification of Principal Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.		Filed herewith
32.1	Certification of Principal Executive Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.		Furnished herewith
32.2	Certification of Principal Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.		Furnished herewith
101.INS	XBRL Instance Document		Filed herewith
101.SCH	XBRL Taxonomy Extension Schema Document		Filed herewith
101.CAL	XBRL Taxonomy Extension Calculation Linkbase Document		Filed herewith
101.DEF	XBRL Taxonomy Extension Definition Linkbase Document		Filed herewith
101.LAB	XBRL Taxonomy Extension Label Linkbase Document		Filed herewith
101.PRE	XBRL Taxonomy Extension Presentation Linkbase Document		Filed herewith
104	Cover Page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101)		Filed herewith

* Portions of this document (indicated by “[***]”) have been omitted because such information is not material and is the type of information that the registrant treats as private or confidential.

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this report has been signed below by the following persons on behalf of the registrant in the capacities and on the dates indicated.

Date: July 12, 2023	By:	/s/ Daniel Solomita
	Name:	Daniel Solomita
	Title:	President and Chief Executive Officer, and Director (Principal Executive Officer)

Date: July 12, 2023	By:	/s/ Fady Mansour
	Name:	Fady Mansour
	Title:	Chief Financial Officer (Principal Accounting Officer and Principal Financial Officer)

nullnullnullnullnull

Cover - shares	3 Months Ended
Cover - shares	May 31, 2023	Jul. 11, 2023
Cover [Abstract]
Entity Registrant Name	Loop Industries, Inc.
Entity Central Index Key	0001504678
Document Type	10-Q
Amendment Flag	false
Current Fiscal Year End Date	--02-28
Entity Small Business	true
Entity Shell Company	false
Entity Emerging Growth Company	false
Entity Current Reporting Status	Yes
Document Period End Date	May 31, 2023
Entity Filer Category	Non-accelerated Filer
Document Fiscal Period Focus	Q1
Document Fiscal Year Focus	2023
Entity Common Stock Shares Outstanding		47,521,187
Document Quarterly Report	true
Document Transition Report	false
Entity File Number	000-54768
Entity Incorporation State Country Code	NV
Entity Tax Identification Number	27-2094706
Entity Interactive Data Current	Yes
Entity Address Address Line 1	480 Fernand-Poitras
Entity Address Address Line 2	Terrebonne
Entity Address City Or Town	Québec
Entity Address Country	CA
Entity Address Postal Zip Code	J6Y 1Y4
City Area Code	450
Local Phone Number	951-8555
Security 12b Title	Common Stock
Trading Symbol	LOOP
Security Exchange Name	NASDAQ

Condensed Consolidated Balance Sheets - USD ($) $ in Thousands	May 31, 2023	Feb. 28, 2023
Current assets
Cash and cash equivalents	$ 21,970	$ 29,591
Restricted cash	1,000	1,000
Sales tax, tax credits and other receivables (Note 3)	1,158	1,075
Inventories (Note 4)	871	727
Deposits on machinery and equipment (Note 5)	5,430	3,395
Prepaid expenses and other deposits (Note 5)	710	636
Total current assets	31,139	36,424
Investment in joint venture	381	381
Property, plant and equipment, net (Note 6)	2,446	2,545
Intangible assets, net (Note 7)	1,278	1,210
Total assets	35,244	40,560
Current liabilities
Accounts payable and accrued liabilities (Note 9)	3,828	2,510
Customer deposits	1,000	1,012
Current portion of long-term debt (Note 10)	208	62
Total current liabilities	5,036	3,584
Long-term debt (Note 10)	3,098	3,240
Total liabilities	8,134	6,824
Stockholders' Equity
Series A Preferred stock par value $0.0001; 25,000,000 shares authorized; one share issued and outstanding	0	0
Common stock par value $0.0001; 250,000,000 shares authorized; 47,521,187 shares issued and outstanding (February 28, 2023 - 47,469,224) (Note 12)	5	5
Additional paid-in capital	170,725	170,370
Additional paid-in capital - Warrants	20,385	20,385
Accumulated deficit	(162,884)	(155,883)
Accumulated other comprehensive loss	(1,121)	(1,141)
Total stockholders' equity	27,110	33,736
Total liabilities and stockholders' equity	$ 35,244	$ 40,560

Condensed Consolidated Balance Sheets (Parenthetical) - $ / shares	May 31, 2023	Feb. 28, 2023
Stockholders' Equity
Series A preferred stock, par value	$ 0.0001	$ 0.0001
Series A preferred stock, share authorized	25,000,000,000	25,000,000,000
Series A preferred stock, share issued	1,000	1,000
Series A preferred stock, share outstanding	1,000	1,000
Common stock, par value	$ 0.0001	$ 0.0001
Common stock, shares authorized	250,000,000,000	250,000,000,000
Common stock, shares issued	47,521,187,000	47,469,224,000
Common stock, shares outstanding	47,521,587,000	47,469,224,000

Condensed Consolidated Statements of Operations and Comprehensive Loss (Unaudited) - USD ($) $ in Thousands	3 Months Ended
	May 31, 2023	May 31, 2022
Condensed Consolidated Statements of Operations and Comprehensive Loss (Unaudited)
Revenue from contracts with customers	$ 27	$ 0
Expenses :
Research and development (Note 13)	4,490	6,800
General and administrative (Note 14)	2,465	11,037
Depreciation and amortization (Notes 6 and 7)	133	139
Total expenses	7,088	17,976
Other (income) loss :
Interest and other financial expenses	54	41
Interest income	(99)	(13)
Foreign exchange (gain) loss	(15)	2
Total other (income) loss	(60)	30
Net loss	(7,001)	(18,006)
Other comprehensive loss -
Foreign currency translation adjustment	20	(5)
Comprehensive loss	$ (6,981)	$ (18,011)
Net loss per share
Basic and diluted	$ (0.15)	$ (0.38)
Weighted average common shares outstanding
Basic and diluted	$ 47,516,104	$ 47,400,571

Condensed Consolidated Statements of Changes in Stockholders Equity (Unaudited) - USD ($) shares in Thousands, $ in Thousands	Total	Common Stock	Additional Paid-In Capital	Additional Paid-in Capital -Warrants	Accumulated Deficit	Accumulated other comprehensive Income (Loss)	Preferred Stock
Balance, shares at Feb. 28, 2022		47,388,056					1
Balance, amount at Feb. 28, 2022	$ 45,995	$ 5	$ 150,397	$ 30,272	$ (134,583)	$ (96)	$ 0
Issuance of shares upon the vesting of restricted stock units (Note 15), shares		12,653
Issuance of shares upon the vesting of restricted stock units (Note 15), amount	0	$ 0	0	0	0	0	0
Stock options issued for services (Note 15)	317	0	317	0	0	0	0
Restricted stock units issued for services (Note 15)	8,149	0	8,149	0	0	0	0
Foreign currency translation	(5)	0	0	0	0	(5)	0
Net loss	18,006	$ 0	0	0	18,006	0	$ 0
Balance, shares at May. 31, 2022		47,400,709					1
Balance, amount at May. 31, 2022	36,450	$ 5	158,863	30,272	(152,589)	(101)	$ 0
Balance, shares at Feb. 28, 2023		47,469,224					1
Balance, amount at Feb. 28, 2023	33,736	$ 5	170,370	20,385	(155,883)	(1,141)	$ 0
Issuance of shares upon the vesting of restricted stock units (Note 15), shares		51,963
Issuance of shares upon the vesting of restricted stock units (Note 15), amount	0	$ 0	0	0	0	0	0
Stock options issued for services (Note 15)	162	0	162	0	0	0	0
Restricted stock units issued for services (Note 15)	193	0	193	0	0	0	0
Foreign currency translation	20	0	0	0	0	20	0
Net loss	7,001	$ 0	0	0	7,001	0	$ 0
Balance, shares at May. 31, 2023		47,521,187					1
Balance, amount at May. 31, 2023	$ 27,110	$ 5	$ 170,725	$ 20,385	$ (162,884)	$ (1,121)	$ 0

Condensed Consolidated Statements of Cash Flows (Unaudited) - USD ($) $ in Thousands	3 Months Ended
	May 31, 2023	May 31, 2022
Cash Flows from Operating Activities
Net loss	$ (7,001)	$ (18,006)
Adjustments to reconcile net loss to net cash used in operating activities:
Depreciation and amortization (Notes 6 and 7)	133	139
Stock-based compensation expense (Note 15)	355	8,466
Accretion and accrued interest expenses (Note 10)	17	40
Changes in operating assets and liabilities:
Sales tax and tax credits receivable (Note 3)	(83)	594
Inventories (Note 4)	(144)
Prepaid expenses (Note 5)	(90)	(870)
Accounts payable and accrued liabilities (Note 9)	1,321	(2,012)
Customer deposits	(12)	0
Net cash used in operating activities	(5,504)	(11,649)
Cash Flows from Investing Activities
Deposits on machinery and equipment (Note 5)	2,023	73
Additions to intangible assets (Note 7)	(99)	(69)
Net cash used in investing activities	(2,122)	4
Cash Flows from Financing Activities
Repayment of long-term debt (Note 10)	(16)	0
Net cash (used) provided by financing activities	(16)	0
Effect of exchange rate changes	21	(15)
Net decrease in cash	(7,621)	(11,660)
Cash, cash equivalents and restricted cash, beginning of period	30,591	44,061
Cash, cash equivalents and restricted cash, end of period	22,970	32,401
Supplemental Disclosure of Cash Flow Information:
Income tax paid	0	0
Interest paid	21	0
Interest received	$ 99	$ 13

The Company and Basis of Presentation

3 Months Ended

May 31, 2023

The Company and Basis of Presentation

The Company and Basis of Presentation

1. The Company and Basis of Presentation

The Company

Basis of Presentation

All monetary amounts in these notes to the condensed consolidated financial statements are in thousands of U.S. dollars unless otherwise specified, except for per share data.

Summary of Significant Accounting Policies

3 Months Ended

May 31, 2023

Summary of Significant Accounting Policies

Summary Of Significant Accounting Policies

2. Summary of Significant Accounting Policies

Liquidity Risk Assessment

Use of estimates

Net earnings (loss) per share

Sales Tax Tax Credits and Other Receivables

3 Months Ended

May 31, 2023

Sales Tax Tax Credits and Other Receivables

Sales Tax, Tax Credits And Other Receivables

3. Sales Tax, Tax Credits and Other Receivables

Sales tax, research and development tax credits and other receivables as at May 31, 2023 and February 28, 2023 were as follows:

	May 31, 2023		February 28, 2023
Sales tax	$	243	$	170
Investment tax credits		461		461
Research and development tax credits		428		402
Other receivables		26		42
	$	1,158	$	1,075

Inventories

3 Months Ended

May 31, 2023

Inventories

Inventories

4. Inventories

Inventories as at May 31, 2023 and February 28, 2023 were as follows:

	May 31, 2023		February 28, 2023
Finished goods	$	585	$	242
Work in process		245		467
Raw materials		41		18
	$	871	$	727

Deposits and Prepaid Expenses

3 Months Ended

May 31, 2023

Deposits and Prepaid Expenses

Deposits and Prepaid Expenses

5. Deposits and Prepaid Expenses

Prepaid expenses and other deposits as at May 31, 2023 and February 28, 2023 were as follows:

	May 31, 2023		February 28, 2023
Insurance	$	545	$	545
Other		165		91
	$	710	$	636

The deposit for insurance represents a pre-payment of the final three months of the Company’s directors’ and officers’ insurance annual premium.

Property Plant and Equipment

3 Months Ended

May 31, 2023

Property Plant and Equipment

Property, Plant And Equipment

6. Property, Plant and Equipment

	As at May 31, 2023
	Cost		Accumulated depreciation, write-down and impairment			Net book value
Building	$	1,822	$	(324	)	$	1,498
Land		225		-			225
Building and Land Improvements		1,839		(1,247	)		594
Office equipment and furniture		274		(147	)		129
	$	4,160	$	(1,718	)	$	2,446

	As at February 28, 2023
	Cost		Accumulated depreciation, write-down and impairment			Net book value
Building	$	1,822	$	(309	)	$	1,513
Land		225		-			225
Building and Land Improvements		1,839		(1,166	)		673
Office equipment and furniture		274		(140	)		134
	$	4,160	$	(1,615	)	$	2,545

Depreciation expense amounted to $101 for the three-month period ended May 31, 2023 (2022 – $119).

Intangible Assets

3 Months Ended

May 31, 2023

Intangible Assets

Intangible Assets

7. Intangible Assets

Intangible assets as at May 31, 2023 and February 28, 2023 were $1,278 and $1,210, respectively.

During the three-month periods ended May 31, 2023 and 2022, we made additions relating to patent application costs to intangible assets of $99 and $69, respectively.

Amortization expense for the three-month period ended May 31, 2023 amounted to $32 (2022 – $20).

Fair Value of Financial Instruments

3 Months Ended

May 31, 2023

Fair Value of Financial Instruments

Fair value of financial instruments

8. Fair Value of Financial Instruments

The following tables presents the fair value of the Company’s financial liabilities as at May 31, 2023 and February 28, 2023:

	Fair Value as at May 31, 2023
	Carrying Amount		Fair Value		Level in the hierarchy
Financial liabilities measured at amortized cost:
Long-term debt	$	3,306	$	3,283	Level 2

	Fair Value as at February 28, 2023
	Carrying Amount		Fair Value		Level in the hierarchy
Financial liabilities measured at amortized cost:
Long-term debt	$	3,302	$	3,280	Level 2

Accounts Payable and Accrued Liabilities

3 Months Ended

May 31, 2023

Accounts Payable and Accrued Liabilities

Accounts Payable And Accrued Liabilities

9. Accounts Payable and Accrued Liabilities

Accounts payable and accrued liabilities as at May 31, 2023 and February 28, 2023 were as follows:

	May 31, 2023		February 28, 2023
Trade accounts payable	$	1,534	$	1,020
Accrued machinery and equipment expenses		1,225		-
Accrued employee compensation		581		712
Accrued professional fees		236		410
Accrued engineering fees		55		96
Accrued director compensation		44		44
Other accrued liabilities		153		228
	$	3,828	$	2,510

The accrued machinery and equipment expenses as at May 31, 2023 are related to machinery and equipment to be used at the Company’s Terrebonne Facility.

Long Term Debt

3 Months Ended

May 31, 2023

Long Term Debt

Long-term Debt

10. Long‑Term Debt

Long-term debt as of May 31, 2023 and February 28, 2023, was comprised of the following:

	May 31, 2023			February 28, 2023
Investissement Québec financing facility:
Principal amount	$	3,372		$	3,380
Unamortized discount		(244	)		(261	)
Accrued interest		178			183
Total Investissement Québec financing facility		3,306			3,302
Less: current portion of long-term debt		(208	)		(62	)
Long-term debt, net of current portion	$	3,098		$	3,240

Investissement Québec financing facility

Total repayments due on the Company’s indebtedness over the next five years are as follows:

Years ending	Amount
February 29, 2024	$	47
February 28, 2025		584
February 28, 2026		584
February 28, 2027		584
February 29, 2028		584
Thereafter		1,167
Total	$	3,550

Credit facility from a Canadian bank

Related Party Transactions

3 Months Ended

May 31, 2023

Related Party Transactions

Related Party Transactions

11. Related Party Transactions

Employment Agreement

Stockholders' Equity

3 Months Ended

May 31, 2023

Stockholders' Equity

Stockholders' Equity

12. Stockholders’ Equity

Common Stock

For the period ended May 31, 2023	Number of shares		Amount
Balance, February 28, 2023		47,469,224	$	5
Issuance of shares upon settlement of restricted stock units		51,963		-
Balance, May 31, 2023		47,521,187	$	5

For the period ended May 31, 2022	Number of shares		Amount
Balance, February 28, 2022		47,388,056	$	5
Issuance of shares upon settlement of restricted stock units		12,653		-
Balance, May 31, 2022		47,400,709	$	5

During the three months ended May 31, 2023, the Company recorded the following common stock transaction:

(i)	The Company issued 51,963 shares of the common stock to settle restricted stock units that vested in the period.

During the three months ended May 31, 2022, the Company recorded the following common stock transaction:

(i)	The Company issued 12,653 shares of the common stock to settle restricted stock units that vested in the period.

Research and Development Expenses

3 Months Ended

May 31, 2023

Research and Development Expenses

Research And Development Expenses

13. Research and Development Expenses

Research and development expenses for the three-month periods ended May 31, 2023 and 2022 were as follows:

	May 31, 2023		May 31, 2022
Employee compensation	$	1,446	$	2,287
Machinery and equipment expenditures		1,236		1,890
External engineering		1,155		1,596
Plant and laboratory operating expenses		469		866
Other		184		161
	$	4,490	$	6,800

General and Administrative Expenses

3 Months Ended

May 31, 2023

General and Administrative Expenses

General And Administrative Expenses

14. General and Administrative Expenses

General and administrative expenses for the three-month periods ended May 31, 2023 and 2022 were as follows:

	May 31, 2023		May 31, 2022
Employee compensation⁽¹⁾	$	833	$	8,785
Insurance		703		1,103
Professional fees		619		799
Other		310		350
	$	2,465	$	11,037

(1)	Includes stock-based compensation expense. During the three-month period ended May 31, 2022, the Company recorded a stock-based compensation expense of $7,740 related to the achievement of a performance milestone for 1,000,000 RSUs (Note 11).

Share Based Payments

3 Months Ended

May 31, 2023

Share Based Payments

Share-based Payments

15. Share-based Payments

Stock Options

The following tables summarizes the continuity of the Company’s stock options during the three-month periods ended May 31, 2023 and 2022:

	2023				2022
	Number of stock options		Weighted average exercise price		Number of stock options		Weighted average exercise price
Outstanding, beginning of period		2,542,000	$	5.27		1,570,000	$	6.87
Granted		240,000		3.11		-		-
Exercised		-		-		-		-
Forfeited		-		-		-		-
Expired		-		-		-		-
Outstanding, end of period		2,782,000	$	5.08		1,570,000	$	6.87
Exercisable, end of period		1,670,000	$	6.84		1,336,667	$	7.65

Exercise price	$	3.11
Risk-free interest rate		3.84	%
Expected dividend yield		0	%
Expected volatility		79	%
Expected life	3 years

During the three-month periods ended May 31, 2023 and 2022, stock-based compensation expense attributable to stock options amounted to $162 and $317, respectively.

Restricted Stock Units

The following table summarizes the continuity of the restricted stock units during the three-month periods ended May 31, 2023 and 2022:

	2023					2022
	Number of units			Weighted average fair value price		Number of units			Weighted average fair value price
Outstanding, beginning of period		3,888,618		$	7.09		4,018,567		$	7.42
Granted		470,000			2.87		84,861			6.00
Settled		(51,963	)		8.66		(12,653	)		13.04
Forfeited		-			-		-			-
Outstanding, end of period		4,306,655		$	6.61		4,090,775		$	7.37
Outstanding vested, end of period		1,568,497		$	6.31		1,530,313		$	6.14

Stock-Based Compensation Expense

Equity Incentive Plan

3 Months Ended

May 31, 2023

Equity Incentive Plan

Equity Incentive Plan

16. Equity Incentive Plan

The following table summarizes the continuity of the Company’s Equity Incentive Plan units that were authorized for issuance as at and during the three-month periods ended May 31, 2023 and 2022:

	2023			2022
	Number of units*			Number of units*
Authorized, beginning of period		120,486			1,043,705
Automatic share reserve increase		1,500,000			-
Units granted		(710,000	)		(84,861	)
Units forfeited		-			-
Units expired		-			-
Authorized, end of period		910,486			958,844

*The use of the term “units” in the table above describes a combination of stock options and RSUs.

Commitments

3 Months Ended

May 31, 2023

Commitments

Commitments

17. Commitments

Agreement to purchase of machinery and equipment

Agreement with SK Geo Centric Co. Ltd. (“SKGC”)

Summary of Significant Accounting Policies (Policies)	3 Months Ended
Summary of Significant Accounting Policies (Policies)	May 31, 2023
Summary of Significant Accounting Policies
Liquidity Risk Assessment	Since its inception, the Company has been in the pre-commercialization stage with limited revenues from customers, and its ongoing operations and commercialization plans have been financed primarily by raising equity. The Company has incurred net losses and negative cash flow from operating and investing activities since its inception and expects to incur additional net losses while it continues to develop and plan for commercialization. As at May 31, 2023, the Company’s available liquidity was $24,543, consisting of cash and cash equivalents of $21,970 and an undrawn senior loan facility from a Canadian bank of $2,573. Management actively monitors the Company’s cash resources against the Company’s short-term cash commitments to ensure the Company has sufficient liquidity to fund its costs for at least twelve months from the financial statement issuance date. Management evaluates the Company’s liquidity to determine if there is substantial doubt about the Company’s ability to continue as a going concern. In preparing this liquidity assessment, management applies significant judgment in estimating future cash flow requirements of the Company based on budgets and forecasts, which includes developing assumptions related to: (i) estimation of amount and timing of future cash outflows and inflows and (ii) determining what future expenditures are committed and what could be considered discretionary. Based on this assessment, management believes that the Company will be able to realize its assets and discharge its liabilities in the normal course of operations as they become due for a period of no less than twelve months from the date of issuance of these unaudited interim condensed consolidated financial statements. The Company’s ability to move to the next stage of its strategic development and construct manufacturing plants is dependent on whether the Company can obtain the necessary financing through a combination of the issuance of debt, equity, and/or joint ventures, and/or government incentive programs, and/or customers. However, there is no assurance that the Company will be successful in attracting additional funding. Even if additional financing is available, it may not be available on terms favorable to the Company. Failure to secure additional financing on favorable terms when it becomes required would have an adverse effect on the Company’s financial position and on its ability to execute its business plan. The Company has committed $3,116 of its cash resources for certain long lead equipment during the current fiscal year and may enter into additional commitments to accelerate commercial projects within targeted construction timeframes.
Use Of Estimates	The preparation of financial statements in conformity with US GAAP requires management to use its judgment to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosures of contingent assets and liabilities at the date of the financial statements and the reported amounts of expenses during the reporting period. Actual results could differ from those estimates. Those estimates and assumptions include the going concern assessment, estimates for depreciable lives of property, plant and equipment and intangible assets, recoverability of tax credits receivable, assumptions made in calculating the fair value of stock-based compensation and other equity instruments, and the assessment of performance conditions for stock-based compensation awards.
Net Earnings (loss) Per Share	The Company computes net loss per share in accordance with FASB ASC 260, Earnings Per Share. Basic earnings (loss) per share is computed by dividing the net income (loss) applicable to common stockholders by the weighted average number of shares of common stock outstanding during the year. The Company includes common stock issuable in its calculation. Diluted earnings (loss) per share is computed by dividing the net income (loss) applicable to common stockholders by the weighted average number of common shares outstanding plus the number of additional common shares that would have been outstanding if all dilutive potential common shares had been issued, using the treasury stock method. Potential common shares are excluded from the computation if their effect is antidilutive. For the three-month periods ended May 31, 2023 and 2022, the calculations of basic and diluted loss per share are the same because potential dilutive securities would have an antidilutive effect. As at May 31, 2023, the potentially dilutive securities consisted of 2,782,000 outstanding stock options (2022 – 1,570,000), 4,306,655 outstanding restricted stock units (2022 – 4,090,775), and 7,089,400 outstanding warrants (2022 – 11,659,418).

Sales Tax Tax Credits and Other Receivables (Tables)

3 Months Ended

May 31, 2023

Sales Tax Tax Credits and Other Receivables

Schdule of Sales tax, tax credits and other receivables

	May 31, 2023		February 28, 2023
Sales tax	$	243	$	170
Investment tax credits		461		461
Research and development tax credits		428		402
Other receivables		26		42
	$	1,158	$	1,075

Inventories (Tables)

3 Months Ended

May 31, 2023

Inventories

Inventories

	May 31, 2023		February 28, 2023
Finished goods	$	585	$	242
Work in process		245		467
Raw materials		41		18
	$	871	$	727

Deposits and Prepaid Expenses (Tables)

3 Months Ended

May 31, 2023

Deposits and Prepaid Expenses

Deposits and Prepaid Expenses

	May 31, 2023		February 28, 2023
Insurance	$	545	$	545
Other		165		91
	$	710	$	636

Property Plant and Equipment (Tables)

3 Months Ended

May 31, 2023

Property Plant and Equipment

Property, Plant And Equipment

	As at May 31, 2023
	Cost		Accumulated depreciation, write-down and impairment			Net book value
Building	$	1,822	$	(324	)	$	1,498
Land		225		-			225
Building and Land Improvements		1,839		(1,247	)		594
Office equipment and furniture		274		(147	)		129
	$	4,160	$	(1,718	)	$	2,446

	As at February 28, 2023
	Cost		Accumulated depreciation, write-down and impairment			Net book value
Building	$	1,822	$	(309	)	$	1,513
Land		225		-			225
Building and Land Improvements		1,839		(1,166	)		673
Office equipment and furniture		274		(140	)		134
	$	4,160	$	(1,615	)	$	2,545

Fair Value of Financial Instruments (Tables)

3 Months Ended

May 31, 2023

Fair Value of Financial Instruments

Fair Value of Financial Instruments

	Fair Value as at May 31, 2023
	Carrying Amount		Fair Value		Level in the hierarchy
Financial liabilities measured at amortized cost:
Long-term debt	$	3,306	$	3,283	Level 2

	Fair Value as at February 28, 2023
	Carrying Amount		Fair Value		Level in the hierarchy
Financial liabilities measured at amortized cost:
Long-term debt	$	3,302	$	3,280	Level 2

Accounts Payable and Accrued Liabilities (Tables)

3 Months Ended

May 31, 2023

Accounts Payable and Accrued Liabilities

Schdule of Accounts Payable And Accrued Liabilities

	May 31, 2023		February 28, 2023
Trade accounts payable	$	1,534	$	1,020
Accrued machinery and equipment expenses		1,225		-
Accrued employee compensation		581		712
Accrued professional fees		236		410
Accrued engineering fees		55		96
Accrued director compensation		44		44
Other accrued liabilities		153		228
	$	3,828	$	2,510

LongTerm Debt (Tables)

3 Months Ended

May 31, 2023

LongTerm Debt (Tables)

Schdule of Long-term Debt

	May 31, 2023			February 28, 2023
Investissement Québec financing facility:
Principal amount	$	3,372		$	3,380
Unamortized discount		(244	)		(261	)
Accrued interest		178			183
Total Investissement Québec financing facility		3,306			3,302
Less: current portion of long-term debt		(208	)		(62	)
Long-term debt, net of current portion	$	3,098		$	3,240

Principal Repayments

Years ending	Amount
February 29, 2024	$	47
February 28, 2025		584
February 28, 2026		584
February 28, 2027		584
February 29, 2028		584
Thereafter		1,167
Total	$	3,550

Stockholders Equity (Tables)

3 Months Ended

May 31, 2023

Stockholders Equity Abstract

Common Stock

For the period ended May 31, 2023	Number of shares		Amount
Balance, February 28, 2023		47,469,224	$	5
Issuance of shares upon settlement of restricted stock units		51,963		-
Balance, May 31, 2023		47,521,187	$	5

For the period ended May 31, 2022	Number of shares		Amount
Balance, February 28, 2022		47,388,056	$	5
Issuance of shares upon settlement of restricted stock units		12,653		-
Balance, May 31, 2022		47,400,709	$	5

Research and Development Expenses (Tables)

3 Months Ended

May 31, 2023

Research and Development Expenses

Research And Development Expenses

	May 31, 2023		May 31, 2022
Employee compensation	$	1,446	$	2,287
Machinery and equipment expenditures		1,236		1,890
External engineering		1,155		1,596
Plant and laboratory operating expenses		469		866
Other		184		161
	$	4,490	$	6,800

General and Administrative Expenses (Tables)

3 Months Ended

May 31, 2023

General and Administrative Expenses

General And Administrative Expenses

	May 31, 2023		May 31, 2022
Employee compensation⁽¹⁾	$	833	$	8,785
Insurance		703		1,103
Professional fees		619		799
Other		310		350
	$	2,465	$	11,037

Share based Payments (Tables)

3 Months Ended

May 31, 2023

Share based Payments (Tables)

Schdule of Stock Options Activity

	2023				2022
	Number of stock options		Weighted average exercise price		Number of stock options		Weighted average exercise price
Outstanding, beginning of period		2,542,000	$	5.27		1,570,000	$	6.87
Granted		240,000		3.11		-		-
Exercised		-		-		-		-
Forfeited		-		-		-		-
Expired		-		-		-		-
Outstanding, end of period		2,782,000	$	5.08		1,570,000	$	6.87
Exercisable, end of period		1,670,000	$	6.84		1,336,667	$	7.65

Principle components of the pricing model of stock option activity

Exercise price	$	3.11
Risk-free interest rate		3.84	%
Expected dividend yield		0	%
Expected volatility		79	%
Expected life	3 years

Schdule of restricted stock units

	2023					2022
	Number of units			Weighted average fair value price		Number of units			Weighted average fair value price
Outstanding, beginning of period		3,888,618		$	7.09		4,018,567		$	7.42
Granted		470,000			2.87		84,861			6.00
Settled		(51,963	)		8.66		(12,653	)		13.04
Forfeited		-			-		-			-
Outstanding, end of period		4,306,655		$	6.61		4,090,775		$	7.37
Outstanding vested, end of period		1,568,497		$	6.31		1,530,313		$	6.14

Equity Incentive Plan (Tables)

3 Months Ended

May 31, 2023

Equity Incentive Plan

Equity Incentive Plan

	2023			2022
	Number of units*			Number of units*
Authorized, beginning of period		120,486			1,043,705
Automatic share reserve increase		1,500,000			-
Units granted		(710,000	)		(84,861	)
Units forfeited		-			-
Units expired		-			-
Authorized, end of period		910,486			958,844

The Company and Basis of Presentation (Details Narrative)	Feb. 28, 2023
Common Stock [Member]
Ownership, Percentage	50.00%

Summary of Significant Accounting Policies (Details Narrative) - USD ($) $ in Thousands	3 Months Ended
	May 31, 2023	May 31, 2022
Available Liquidity	$ 245,430
Additional commitments	31,160
Cash and cash equivalents	219,700
Loan facility	$ 25,730
Note Warrant [Member]
Dilutive Securities	7,089,400	11,659,418
Restricted Stock Units [Member]
Dilutive Securities	4,306,655	4,090,775
Stock Option [Member]
Dilutive Securities	2,782,000	1,570,000

Sales Tax Tax Credits and Other Receivables (Details) - USD ($) $ in Thousands	May 31, 2023	Feb. 28, 2023
Sales Tax Tax Credits and Other Receivables
Sales Tax	$ 243	$ 170
Investment tax credits	461	461
Research And Development Tax Credits	428	402
Other Receivables	26	42
Total	$ 1,158	$ 1,075

Inventories (Details) - USD ($) $ in Thousands	May 31, 2023	Feb. 28, 2023
Inventories
Finished goods	$ 585	$ 242
Work in process	245	467
Raw materials	41	18
Inventory net	$ 871	$ 727

Deposits and Prepaid Expenses (Details) - USD ($) $ in Thousands	May 31, 2023	Feb. 28, 2023
Deposits and Prepaid Expenses
Other	$ 545	$ 545
Insurance	165	91
Prepaid expenses	$ 710	$ 636

Deposits and Prepaid Expenses (Details Narrative) - USD ($)	May 31, 2023	Feb. 28, 2023
Deposits and Prepaid Expenses
Non-refundable cash deposits on long-lead machinery and equipment	$ 5,430	$ 3,395

Property Plant and Equipment (Details) - USD ($) $ in Thousands	May 31, 2023	Feb. 28, 2023
Property, Plant And Equipment, Gross	$ 4,160	$ 4,160
Less: Accumulated Depreciation, Write-down And Impairment	(1,718)	(1,615)
Property, Plant And Equipment, Net	2,446	2,545
Building [Member]
Property, Plant And Equipment, Gross	1,822	1,822
Less: Accumulated Depreciation, Write-down And Impairment	(324)	(309)
Property, Plant And Equipment, Net	1,498	1,513
Land [Member]
Property, Plant And Equipment, Gross	225	225
Less: Accumulated Depreciation, Write-down And Impairment	0	0
Property, Plant And Equipment, Net	225	225
Building And Land Improvements [Member]
Property, Plant And Equipment, Gross	1,839	1,839
Less: Accumulated Depreciation, Write-down And Impairment	(1,247)	(1,166)
Property, Plant And Equipment, Net	594	673
Office Equipment and Furniture [Member]
Property, Plant And Equipment, Gross	274	274
Less: Accumulated Depreciation, Write-down And Impairment	(147)	(140)
Property, Plant And Equipment, Net	$ 129	$ 134

Property Plant and Equipment (Details Narrative) - USD ($) $ in Thousands	3 Months Ended
	May 31, 2023	May 31, 2022
Property Plant and Equipment
Depreciation Expense	$ 101	$ 119

Intangible Assets (Details Narrative) - USD ($) $ in Thousands	3 Months Ended
	May 31, 2023	May 31, 2022	Feb. 28, 2023
Intangible Assets
Intangible assets	$ 1,278		$ 1,210
Additions to intangible assets	99	$ 69
Amortization expense	$ 32	$ 20

Fair Value of Financial Instruments (Details) - Long-term Debt [Member] - Level 2 [Member] - USD ($) $ in Thousands	May 31, 2023	Feb. 28, 2023
Carrying Amount	$ 3,306	$ 3,302
Fair Value	$ 3,283	$ 3,280

Accounts Payable and Accrued Liabilities (Details) - USD ($) $ in Thousands	May 31, 2023	Feb. 28, 2023
Accounts Payable and Accrued Liabilities
Trade Accounts Payable	$ 1,534	$ 1,020
Accrued machinery and equipment expenses	1,225	0
Accrued Employee Compensation	581	712
Accrued Professional Fees	236	410
Accrued Engineering Fees	55	96
Accrued director compensation	44	44
Other Accrued Liabilities	153	228
Accounts Payable And Accrued Liabilities	$ 3,828	$ 2,510

Long-Term Debt (Details) - USD ($) $ in Thousands	May 31, 2023	Feb. 28, 2023
Principal Amount	$ 3,550
Less: Current Portion	(208)	$ (62)
Long-term Debt, Net Of Current Portion	3,098	3,240
Investissement Quebec Financing Facility [Member]
Principal Amount	3,372	3,380
Unamortized Discount	(244)	(261)
Accrued Interest	178	183
Total Investissement Qu?bec financing facility	3,306	3,302
Less: Current Portion	(208)	(62)
Long-term Debt, Net Of Current Portion	$ 3,098	$ 3,240

Long-Term Debt (Details 1) $ in Thousands	May 31, 2023 USD ($)
LongTerm Debt (Tables)
February 29, 2024	$ 47
February 28, 2025	584
February 28, 2026	584
February 28, 2027	584
February 29, 2028	584
Thereafter	1,167
Total	$ 3,550

Long-Term Debt (Details Narrative) - USD ($)	1 Months Ended	3 Months Ended
Long-Term Debt (Details Narrative) - USD ($)	Jul. 26, 2022	May 31, 2023	May 31, 2022
Borrowings	$ 2,573,000
Credit Facility	$ 2,573,000
Annual interest rate	1.00%
Investissement Quebec Financing Facility [Member]
Interest Expense		$ 21,000	$ 22,000
Accretion Expense		17,000	18,000
Repayments amount		$ 16,000	$ 0

Related Party Transactions (Details Narrative) - USD ($) $ / shares in Units, $ in Thousands		3 Months Ended
	Jul. 13, 2018	May 31, 2023	May 31, 2022	Apr. 30, 2020
Unvested Restricted Stock Units Forfeited			1,000,000
Common Stock With A Fair Value			$ 7,740
Long-term incentive grant shares	4,000,000
Shares Granted		240,000
President and Chief Executive Officers [Member]
Shares Granted	4,000,000
Closing Price Per Share				$ 7.74
President and Chief Executive Officer [Member] \| Restricted Stock Units [Member]
Shares Granted	4,000,000

Stockholders Equity (Details) - USD ($) $ in Thousands	3 Months Ended
Stockholders Equity (Details) - USD ($) $ in Thousands	May 31, 2023	May 31, 2022
Balance, amount	$ 33,736	$ 45,995
Issuance Of Shares Upon Settlement Of Restricted Stock Units, Shares	51,963	12,653
Balance, amount	$ 27,110	$ 36,450
Common Stock [Member]
Balance, amount	$ 5	$ 5
Balance, shares	47,469,224	47,388,056
Issuance Of Shares Upon Settlement Of Restricted Stock Units, Shares	51,963	12,653
Issuance Of Shares Upon Settlement Of Restricted Stock Units, Amount	$ 0	$ 0
Balance, shares	47,521,187	47,400,709
Balance, amount	$ 5	$ 5

Stockholders Equity (Details Narrative) - shares	3 Months Ended
Stockholders Equity (Details Narrative) - shares	May 31, 2023	May 31, 2022
Stockholders Equity Abstract
Issuance Of Shares Upon Settlement Of Restricted Stock Units, Shares	51,963	12,653

Research and Development Expenses (Details) - USD ($) $ in Thousands	3 Months Ended
	May 31, 2023	May 31, 2022
Research and Development Expenses	$ 4,490	$ 6,800
Machinery and Equipments [Member]
Research and Development Expenses	1,236	1,890
Employee Compensation R & D [Member]
Research and Development Expenses	1,446	2,287
External Engineering [Member]
Research and Development Expenses	1,155	1,596
Plant and Laboratory Operating Expenses [Member]
Research and Development Expenses	469	866
Other [Member]
Research and Development Expenses	$ 184	$ 161

General and Administrative Expenses (Details) - USD ($) $ in Thousands	3 Months Ended
	May 31, 2023	May 31, 2022
General and administrative expenses	$ 2,465	$ 11,037
Employee Compensation [Member]
General and administrative expenses	833	8,785
Insurance [Member]
General and administrative expenses	703	1,103
Professional Fees [Member]
General and administrative expenses	619	799
Other (Member)
General and administrative expenses	$ 310	$ 350

General and Administrative Expenses (Details Narrative) - USD ($) $ in Thousands	3 Months Ended
	May 31, 2023	May 31, 2022
Net Reversal Of Stock-based Compensation	$ 355	$ 8,466
Restricted Stock Units [Member]
Net Reversal Of Stock-based Compensation	$ 7,740
RSU shares	1,000,000

Share-Based Payments (Details) - $ / shares	3 Months Ended
Share-Based Payments (Details) - $ / shares	May 31, 2023	May 31, 2022
Share Based Payments
Number Of Options Outstanding, Beginning	2,542,000	1,570,000
Number Of Options, Granted	240,000
Number Of Options Outstanding, Ending	2,782,000	1,570,000
Exercisable, End Of Year	1,670,000	1,336,667
Weighted Average Exercise Price Outstanding, Beginning	$ 5.27	$ 6.87
Weighted Average Exercise Price, Granted	3.11	0
Weighted Average Exercise Price, Exercised	0	0
Weighted Average Exercise Price, Forfeited	0	0
Weighted Average Exercise Price, Expired	0	0
Weighted Average Outstanding, End Of Year	5.08	6.87
Weighted Average Exercise Price Outstanding, Ending	$ 6.84	$ 7.65

Share-Based Payments (Details 1)	3 Months Ended
Share-Based Payments (Details 1)	May 31, 2023 USD ($) $ / shares
Share Based Payments
Expected dividend yield \| $	$ 0
Exercise price \| $ / shares	$ 3.11
Risk-free interest rate	3.84%
Expected life	3 years
Expected volatility	79.00%

Share-Based Payments (Details 2) - Restricted Stock Units [Member] - $ / shares	3 Months Ended
	May 31, 2023	May 31, 2022
Number Of Units Outstanding, Beginning	3,888,618	4,018,567
Number Of Units, Granted	470,000	84,861
Number of Units, Settled	51,963	12,653
Number Of Units Outstanding, Ending	4,306,655	4,090,775
Number Of Units Outstanding Vested, Ending	1,568,497	1,530,313
Weighted Average Exercise Price Outstanding, Beginning	$ 7.09	$ 7.42
Weighted Average Exercise Price, Granted	2.87	6.00
Weighted Average Exercise Price, Vested	8.66	13.04
Weighted Average Exercise Price, Forfeited	0	0
Weighted Average Exercise Price Outstanding, Ending	6.61	7.37
Weighted Average Exercise Price Outstanding Vested, Ending	$ 6.31	$ 6.14

Share-Based Payments (Details Narrative) - USD ($) $ in Thousands	3 Months Ended
	May 31, 2023	May 31, 2022
Stock-based Compensation Expense Attributable To Stock Options	$ 162	$ 317
Stock-based Compensation Attributable To Rsus	$ 193	8,149
Number Of Units, Granted	1,000,000
Stock-based Compensation Expense	$ 7,740
Research and Development Expenses [Member]
Stock-based Compensation Expense	$ 159	396
General and Administrative Expenses [Member]
Number Of Units, Granted	1,000,000
Stock-based Compensation Expense	$ 196	$ 8,070
Achievement of performance milestone	$ 7,740

Equity Incentive Plan (Details) - Equity Incentive Plan [Member[ - shares	3 Months Ended
	May 31, 2023	May 31, 2022
Number Of Units Authorized, Beginning	120,486	1,043,705
Automatic share reserve increase	1,500,000
Units Granted	(710,000)	(84,861)
Number Of Units Authorized, Ending	910,486	958,844

Equity Incentive Plan (Details Narrative) - shares		3 Months Ended
Equity Incentive Plan (Details Narrative) - shares	Jul. 06, 2017	May 31, 2023	Mar. 01, 2023
Expected Life		3 years
2017 Equity Incentive Plan [Member]
Common Stock Shares Reserved For Future Issuance	3,000,000
Common Stock Shares Reserved For Future Issuance Annual Increase	1,500,000		1,500,000
Expected Life		10 years
Voting Power Percentage		10
Life Of Option		5 years
Common Stock Outstanding Shares Percentage	5.00%

Commitments (Details Narrative) - USD ($) $ in Thousands	Apr. 27, 2023	Dec. 31, 2021
Purchase Of Long Lead Machinery		$ 8,546
Cash Deposit		$ 5,430
Loop Industries [Member]
Ownership, Percentage	49.00%
SK Geo Centric Ltd [Member]
Ownership, Percentage	51.00%

Loop Industries (NASDAQ:LOOP)
Gráfica de Acción Histórica
De Nov 2024 a Dic 2024

Haga Click aquí para más Gráficas Loop Industries.

Loop Industries (NASDAQ:LOOP)
Gráfica de Acción Histórica
De Dic 2023 a Dic 2024

Datos

Noticias

Herramientas

Mercados

Descubrir

Hot Features

Follow Feed

Flujo de Opciones

Monitor

LOOP Loop Industries Inc

Noticias sobre Loop Industries Inc LOOP

Su Consulta Reciente

Empresa

Negocios

Popular

Obtener la aplicación

Tendencias Ahora

Listas Principales

Datos

Noticias

Herramientas

Mercados

Descubrir

Hot Features

Follow Feed

Flujo de Opciones

Monitor

LOOP Loop Industries Inc

Noticias sobre Loop Industries Inc LOOP

Su Consulta Reciente

Empresa

Negocios

Popular

Obtener la aplicación