VANCOUVER, BC, June 13,
2022 /CNW/ - Electric Royalties Ltd. (TSXV: ELEC)
(OTCQB: ELECF) ("Electric Royalties" or the "Company") is pleased
to announce the signing of a binding letter agreement with World
Copper Ltd. (TSXV: WCU) (OTCQB: WCUFF) (FRA: 7LY0) ("World Copper")
to acquire a 0.5% gross revenue royalty ("GRR") on the wholly owned
Zonia Copper Oxide Project in Arizona, US (the "Zonia Project" or "Zonia")
in exchange for C$1,550,000 cash and
2,000,000 common shares of the Company (the "Transaction"). The
Company will also have the right , for a period of 15 months after
closing of the Transaction, to acquire a further 0.5% GRR on the
Zonia Project for C$3,000,000 cash
consideration. In addition, the Company will have an option, to
acquire a 1% GRR on the Zonia Norte deposit, adjacent to the Zonia
Project, for C$3,000,000 cash, at any
time during a period of 24 months from the date that World
Copper publishes an initial technical report in respect of the
Zonia Norte deposit which is prepared in accordance with National
Instrument 43-101 and which contains an estimate of Inferred
Mineral Resources.
The 2,000,000 common shares will be subject to voluntary escrow
which provides that the common shares will be subject to a hold
period of 6 months. The Transaction noted herein is subject to
completion of due diligence, approval of the TSX Venture Exchange
and other customary conditions.
Brendan Yurik, CEO of Electric
Royalties commented, "As a royalty company, we seek to acquire
development assets that that have a clear path to production.
The Zonia Copper Oxide Project is a near-term copper oxide
development project in an attractive mining jurisdiction,
Arizona, with a clear path to
production.
"Zonia has had an extensive amount of drilling and a significant
resource estimate of over 500 million pounds of copper with
potential for further resource growth. At recent and forecast
long-term copper prices, the Zonia Project has robust economics, a
compelling case to bring it to production, and a team experienced
in project delivery. As the project sits entirely on private
patented land in Arizona, there is
potential for a permitting and start of operations timeline of
under four years. Due to the extensive amount of work already
carried out on the project, World Copper's management estimates
that C$5 million is sufficient to
advance the project to feasibility stage within the next two years.
As the world transitions toward a net-zero economy, the clean
energy technologies enabling this shift will be metal intensive.
Copper demand is projected to exceed supply by five to eight
million metric tons by the end of the decade1. We're
very excited to partner with World Copper's management team and
believe that Zonia is well positioned to meet this demand."
Zonia Project Royalty Acquisition
Highlights
- Located in a part of Arizona
with many existing copper mines, past producers and active
exploration projects. The project can be easily reached by the
existing road network, the majority of which is paved highway.
There is existing power on the property and some buildings remain
from previous production between 1966 and 1975.
- Mineral Resource estimate2 completed by Tetra Tech
Inc. includes:
-
- Measured and Indicated Resources of 76.8 million short tons
grading 0.33% copper (Cu) containing 510 million pounds (lb) of
copper (0.2% Cu cut-off grade).
- Inferred Resources of 27.2 million short tons grading 0.28% Cu,
containing 154.6 million pounds of copper (0.2% Cu cut-off
grade).
- Preliminary Economic Assessment3 ("PEA") announced
in 2018, using a base case with a Cu price of US$2.00/lb designed pit shell and a cut-off grade
of 0.17% total Cu. At a Cu price of US$3.00/lb, Zonia's forecast economics are:
-
- After-tax net present value at an 8% discount and Internal rate
of Return of US$177 million and 29%,
respectively, with a 2.89-year payback of initial capital.
- Initial capital of US$198
million.
- Cumulative Net Cash Flow After Taxes of US$331 million.
- Low life-of-mine strip ratio of 0.6:1.
- The PEA pit has been pre-stripped from former production.
- World Copper plans to prepare for prefeasibility-level studies
to further advance the project toward production. This includes a
program of infill drilling with goals to upgrade Inferred
Resources, convert Measured and Indicated Resources to Mineral
Reserves and potentially expand the deposit to the northeast. The
program also includes geotechnical and condemnation drilling.
- World Copper plans to drill a new, separate deposit target with
copper porphyry-style mineralization, Zonia Norte, near the main
resource. No drilling has been done to date.
The PEA is considered preliminary in nature, contains numerous
assumptions and includes Inferred Mineral Resources that are
considered too speculative, geologically, to have the economic
considerations applied that would enable them to be classified as
Mineral Reserves. There is no certainty that the results of
the PEA (or any update thereto) will be realized. No Mineral
Reserves have been estimated for Zonia. Mineral Resources are not
Mineral Reserves and do not have demonstrated economic
viability. Inferred Mineral Resources are that part of the
Mineral Resource for which quantity and grade, or quality are
estimated based on limited geologic evidence and sampling, which is
sufficient to imply but not verify grade or quality continuity.
Inferred Mineral Resources may not be converted to Mineral
Reserves. It is reasonably expected, though not guaranteed, that
most Inferred Mineral Resources could be upgraded to Indicated
Mineral Resources with continued exploration. Mineral Resources are
captured within an optimized pit shell and meet the test of
reasonable prospects for economic extraction.
Zonia Project Overview
History
The Zonia Copper Oxide Project in central Arizona has been held under private ownership
for almost 100 years and has undergone extensive historical
exploration, metallurgical studies and mine development planning.
Much of the mineralized area was pre-stripped during previous
open-pit mining operations in 1966, at which time, 17 million tons
were mined with 7 million tons stacked on heap leach pads,
producing cement copper until 1975. The property has been
drill-tested with almost 700 drill holes (60,000 metres (m)). This
high-density drilling covers 30% of the property and defines the
current resource estimate, reducing technical risk on the deposit.
Mineralization is mostly open to the northeast, providing
considerable opportunity to grow the resource.
Geology
The Zonia deposit is a highly oxidized, supergene enriched,
porphyry deposit, located at surface. Oxidation of the
original chalcopyrite mineralization and younger secondary
supergene chalcocite has been pervasive and deep, extending down
over 250 m in the central part of the
deposit. The original pyrite-chalcopyrite sulphide mineralization
underwent oxidation and remobilization which resulted in
development of chalcocite-rich lenses. This supergene
mineralization was subsequently oxidized and partly remobilized due
to uplift, erosion, and lowering of the water table, resulting in a
large deposit of in-situ and transported copper oxide
mineralization. Oxide copper deposits such as Zonia are
particularly suitable to low-cost heap leaching extraction methods,
and also offer the potential to generate pure copper cathode on
site, without the need for costly transportation of concentrate to
smelters.
Mining and Processing
The Zonia project would employ open pit mining with a
conventional copper acid heap leach system. The mineralized
material would be crushed in a three-stage crushing circuit to a
nominal P80 size of 25 millimetres (mm). The crushed material would
be agglomerated with acid containing solutions using either
raffinate or fresh sulphuric acid, and then be delivered to the
heap via conveyors then stacked in 10-m lifts with a radial
stacker. The heap is designed to contain up to 10 lifts for a
maximum height of 100 m, each with an
interlift liner.
The SX circuit consists of two extraction stages and one
stripping stage using a conventional mixer/settler arrangement. The
electrowinning (EW) circuit consists of two parallel banks of 50
poly-cement cells with 1
m2 cathodes. The plated copper cathodes are
stripped using a mechanized stripping system after being washed.
Copper cathodes are then sampled and bundled for shipment.
Good copper extractions were achieved from the majority of the
metallurgical samples at Zonia, and range from 59% to 81% in a
91-day locked cycle column leach test (excluding the high sulphide
and low grade samples). The copper extraction from the master
composite sample, with a nominal P80 size of 25 mm, was 77.8%. The
overall copper extraction based on the total copper assay (% TCu)
for the deposit is estimated to be between 71% and 75%. For pit
optimization, copper recovery has been assigned based on mineral
type with copper oxide minerals at 73%, secondary copper sulphides
at 70% and primary copper sulphides at 0%.
Exploration
There is ample opportunity to increase the mine life through
successful exploration. There is a compelling target to the
northeast of the deposit location. The Zonia Norte target is
defined by surface rock sampling and forms a copper-molybdenum
anomaly approximately 1,500 m x
2,500 m.
David Gaunt, P.Geo., a Qualified
Person who is not independent of Electric Royalties, has reviewed
and approved the technical information in this release.
About Electric Royalties
Ltd.
Electric Royalties is a royalty company established to take
advantage of the demand for a wide range of commodities (lithium,
vanadium, manganese, tin, graphite, cobalt, nickel, zinc and
copper) that will benefit from the drive toward electrification of
a variety of consumer products: cars, rechargeable batteries, large
scale energy storage, renewable energy generation and other
applications.
Electric vehicle sales, battery production capacity and
renewable energy generation are slated to increase significantly
over the next several years and with it, the demand for these
targeted commodities. This creates a unique opportunity to invest
in and acquire royalties over the mines and projects that will
supply the materials needed to fuel the electric revolution.
Electric Royalties has a growing portfolio of 19 royalties,
including one royalty that currently generates revenue. The Company
is focused predominantly on acquiring royalties on advanced stage
and operating projects to build a diversified portfolio located in
jurisdictions with low geopolitical risk, which offers investors
exposure to the clean energy transition via the underlying
commodities required to rebuild the global infrastructure over the
next several decades towards a decarbonized global
economy.
_______________________
1
https://www.mckinsey.com/industries/metals-and-mining/our-insights/the-raw-materials-challenge-how-the-metals-and-mining-sector-will-be-at-the-core-of-enabling-the-energy-transition
|
2 Technical report
titled "ZONIA COPPER PROJECT, NI 43-101 Technical Report, Yavapai
County, Arizona USA", effective November 30, 2015 and dated
October, 2017 ("Amended Technical Report"), prepared by Tetra Tech
and posted under Cardero Resource Corp.'s profile at
www.sedar.com.
|
3 Preliminary
Economic Assessment NI 43-101 technical report titled "ZONIA COPPER
PROJECT, NI 43-101 Technical Report, Yavapai County, Arizona USA",
effective March 22, 2018 and dated April 17, 2018, prepared by
Global Resource Engineering Ltd. and posted under Cardero Resource
Corp.'s profile at www.sedar.com.
|
Neither the TSX Venture Exchange nor its Regulation Services
Provider (as that term is defined in the policies of the TSX
Venture Exchange), nor any other regulatory body or securities
exchange platform, accepts responsibility for the adequacy or
accuracy of this release.
Cautionary Statements Regarding
Forward-Looking Information and Other Company
Information
This news release includes forward-looking information and
forward-looking statements (collectively, "forward-looking
information") with respect to the Company within the meaning of
Canadian securities laws. Forward looking information is typically
identified by words such as: believe, expect, anticipate, intend,
estimate, postulate and similar expressions, or are those, which,
by their nature, refer to future events. This information
represents predictions and actual events or results may differ
materially. Forward-looking information may relate to the Company's
future outlook and anticipated events and may include statements
regarding the financial results, future financial position,
expected growth of cash flows, business strategy, budgets,
projected costs, projected capital expenditures, taxes, plans,
objectives, industry trends and growth opportunities of the Company
and the projects in which it holds royalty interests.
While management considers these assumptions to be
reasonable, based on information available, they may prove to be
incorrect. Forward-looking statements involve known and unknown
risks, uncertainties and other factors which may cause the actual
results, performance or achievements of the Company or these
projects to be materially different from any future results,
performance or achievements expressed or implied by the
forward-looking statements. These risks, uncertainties and other
factors include, but are not limited to risks associated with
general economic conditions; adverse industry events; marketing
costs; loss of markets; future legislative and regulatory
developments involving the renewable energy industry; inability to
access sufficient capital from internal and external sources,
and/or inability to access sufficient capital on favourable terms;
the mining industry generally, the Covid-19 pandemic, recent market
volatility, income tax and regulatory matters; the ability of the
Company or the owners of these projects to implement their business
strategies including expansion plans; competition; currency and
interest rate fluctuations, and the other risks.
The reader is referred to the Company's most recent filings
on SEDAR as well as other information filed with the OTC Markets
for a more complete discussion of all applicable risk factors and
their potential effects, copies of which may be accessed through
the Company's profile page at www.sedar.com and at
otcmarkets.com.
Cautionary Note to US Investors
Concerning Estimates of Mineral Resources
This news release includes estimates of the mineral resources
on that property and uses the terms "Measured Resources",
"Indicated Resources" and "Inferred Resources". The Company advises
investors that these terms are recognized and required by Canadian
regulations under National Instrument 43-101, Standards of
Disclosure for Mineral Properties ("43-101"). The SEC has adopted
amendments to its disclosure rules to modernize the mineral
property disclosure required for issuers whose securities are
registered with the SEC under the U.S. Securities Exchange Act of
1934 ("The SEC Modernization Rules"). The SEC Modernization
Rules include the adoption of definitions of the terms and
categories of resources which are "substantially similar" to the
corresponding terms under Canadian Regulations in 43-101.
Accordingly, there is no assurance any mineral resources that we
may report as Measured Resources, Indicated Resources and Inferred
Resources under 43-101 would be the same had the resource estimates
been prepared under the standards adopted under the SEC
Modernization Rules. Investors are cautioned not to assume that all
or any part of the mineral deposits in these categories will ever
be converted into reserves. In addition, Inferred Resources have a
great amount of uncertainty as to their economic and legal
feasibility. Under Canadian rules, estimates of Inferred Resources
may not form the basis of feasibility or pre-feasibility studies,
or economic studies except for a Preliminary Economic Assessment as
defined under 43-101.
This news release describes the transaction whereby Electric
Royalties may obtain a royalty interest on potential future
production on a property with mineral resources from the property
owner. Electric Royalties does not directly own this property or
its mineral resources.
SOURCE Electric Royalties Ltd.