Focus Metals Inc. Files Technical Report on Updated Resource Estimate for Lac Knife, Quebec Deposit
19 Enero 2012 - 2:42PM
Marketwired
Focus Metals Inc. (TSX VENTURE:FMS)(OTCQX:FCSMF)(FRANKFURT:FKC)
(the "Company") is pleased to announce that it has filed on SEDAR a
NI 43-101 compliant Technical Report on a mineral resource estimate
at the Company's 100% owned Lac Knife, Quebec Project near Fermont,
Quebec. The graphite mineral resource estimate was prepared by
Edward Lyons, P. Geo. and Guy Saucier, Eng., independent Qualified
Persons of Roche Ltd. ("Roche").
All technical parameters related to the resource estimate are
fully disclosed in the technical report. The new mineral resource
estimate is based on the 105 drill holes (total 8,611 metres)
drilled by Mazarin. Both the historical and modern data were used.
Five zones were interpreted and modeled within the revised
interpretation of the resource calculation. The block model was
developed using GEMS software by Gemcom. Blocks are 5 metres long,
7 metres wide and 5 metres high.
Results were disclosed in December 5th, 2011 press release.
Roche estimated the resource inside these mineralized zones defined
with a 5% Cgr cut-off grade. These zones start from surface to a
maximum depth of 125 metres with a total extension of 350 metres by
650 metres. The results are summarized in the following table.
----------------------------------------------------------------------------
Resource Estimate
--------------------------------------------------------------------
Cut-Off (% Cgr)
----------------------------------------------------------------------------
No Cut-Off 5% 10%
----------------------------------------------------------------------------
Grade Grade Grade
Category Tonnes (% Cgr) Tonnes (% Cgr) Tonnes (% Cgr)
----------------------------------------------------------------------------
Measured
(M) 637,250 15.59 604,735 16.25 504,669 17.95
----------------------------------------------------------------------------
Indicate
d (I) 4,334,890 15.68 4,332,920 15.69 4,028,704 16.24
----------------------------------------------------------------------------
M + I 4,972,140 15.67 4,937,655 15.76 4,533,373 16.43
----------------------------------------------------------------------------
Inferred 3,000,225 15.58 3,000,225 15.58 2,861,228 15.92
----------------------------------------------------------------------------
-- All zones remain open in all directions; inferred resources can be
upgraded to indicated resource after completion of in-fill diamond drill
holes.
-- Values displayed in this table are undiluted and "in-situ" as no
economic parameters, such as mining, milling or metallurgical recovery,
have been applied to these values, and therefore they demonstrate no
economic viability.
The report is available on the Company's website and SEDAR.
Mr. Tony Brisson, P. Geo., a Qualified Person as defined by NI
43-101 is responsible for the technical information contained in
this release.
About Focus Metals Inc.
Focus Metals Inc. is an emerging mid-tier junior mining company,
a technology solutions supplier and a business innovator. It is the
owner of the highest-grade (16%) technology graphite resource in
the world. The company's goal is to assume a dominant industry
leadership position by becoming the lowest-cost producer of
technology-grade graphite. As a technology-oriented enterprise with
a view to building long-term, sustainable shareholder value, Focus
Metals is invested in the development of graphene applications and
patents through Grafoid Inc.
Neither TSX Venture Exchange nor its Regulation Services
Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or
accuracy of this release.
Contacts: Gary Economo President and Chief Executive Officer
613-691-1091 ext. 101
Focus Graphite (QB) (USOTC:FCSMF)
Gráfica de Acción Histórica
De May 2024 a Jun 2024
Focus Graphite (QB) (USOTC:FCSMF)
Gráfica de Acción Histórica
De Jun 2023 a Jun 2024
