ECR Cartier Resources Inc

Cartier Resources Inc. (TSXV: ECR, FSE: 6CA) (”Cartier” or the ”Company”) reports high-grade gold drill results from drilling exploration on the East Cadillac property. The latter is located 45 km east of the Val-d’Or mining camp.

Highlights

• 2024 drilling exploration continue to deliver high-grade gold results on the East Cadillac property (FIGURE)

NEW RESULTS

• Multiple high-grade gold intersections near surface (30 to 90 m deep) at East Bateman Sector (Tables 1 and 2 below):
  • 60.1 g/t Au over 0.5 m
  • 20.3 g/t Au over 1.0 m
  • 20.2 g/t Au over 1.0 m included within 11.4 g/t Au over 3.0 m
  • 20.2 g/t Au over 0.6 m included within 5.0 g/t Au over 3.2 m

2024 PREVIOUS RESULTS

• Confirmation of high-grade gold potential at VG9-VG10 at a distance of 5 km of East Bateman Sector:
  • 142.2 g/t Au over 0.5 m
  • 137.4 g/t Au over 0.5 m
  • 43.2 g/t Au over 1.0 m included within 15.7 g/t Au over 3.0 m
  • 30.2 g/t Au over 1.0 m

• Continuation of the current drilling exploration over 10 km of Larder Lake - Cadillac Fault Zone and mobilization this week of a second rig to follow-up the new high-grade results at VG10 Gold Zone.

"The drilling results on East Cadillac property are very encouraged. This is the third high-grade gold area confirmed in 2024, namely VG9, VG10 and East Bateman," commented Philippe Cloutier, President and CEO, adding, "The ongoing drilling exploration will test additional new high-grade gold targets on 10 of 20 km of the property’s potential."

Table 1: Details of the new results of the East Bateman Sector

Hole	CoordinatesUTM (m)	Azimuth (°) /Plunge (°)	From(m)	To(m)	Au(g/t)	Length(m)
CH24-166	338307/5319399/361	213/-67	115.0	115.5	60.1	0.5
CH24-161	338199/5319403/359	222/-45	62.2	63.2	20.2	1.0
Included within			60.2	63.2	11.4	3.0
CH24-169	338355/5319368/361	175/-68	90.0	91.0	20.3	1.0
CH24-160	338216/5319395/359	161/-45	73.8	74.4	20.2	0.6
Included within			71.2	74.4	5.0	3.2

The lengths of the mineralized intersections are expressed as measured lengths along the drill core.The estimated true widths of the mineralized intersections are approximately 60 to 85% of the reported lengths.

Table 2: Details of the historical high-grade gold results of the East Bateman Sector

Hole	CoordinatesUTM (m)	Azimuth (°) /Plunge (°)	From(m)	To(m)	Au(g/t)	Length(m)
BA-88-14	338222/5319429/360	180/-40	70.1	70.5	161.6	0.4
Included within			66.2	71.3	13.0	5.1
BA-90-09	338306/5319367/361	180/-65	33.3	33.9	57.2	0.6
Included within			30.3	33.9	10.6	3.6
BA-90-13	338213/5319398/360	180/-63	54.2	54.5	32.0	0.3
			54.2	55.5	13.8	1.3
BA-90-12	338356/5319368/362	180/-55	63.2	63.5	48.3	0.3
			62.3	63.5	18.9	1.2

The lengths of the mineralized intersections are expressed as measured lengths along the drill core.The estimated true widths of the mineralized intersections are approximately 65 to 90% of the reported lengths.

About Cartier Resources Inc.

Founded in 2006, Cartier Resources Inc. is an exploration company based in Val-d’Or, Quebec, Canada. The Company’s projects are located in Quebec, which consistently ranks among the world’s best mining jurisdictions. Cartier is actively advancing the development of its flagship Chimo Mine Project and exploring its other projects. The Company has significant corporate and institutional support, including Agnico Eagle Mines, O3 Mining and provincial investment funds.

Quality Assurance / Quality Control

For each batch of samples sent to the laboratory, Cartier inserts 5% of the number of samples in the form of certified standards and another 5% in the form of blanks to ensure quality control. The samples are analyzed at the Techni-Lab (Actlabs) laboratory in Ste-Germaine-Boulé, Quebec, Canada. Samples weighing 3 to 5 kg are crushed by the laboratory to 90% passing 10 mesh (2.00 mm), then a 500 g fraction of each sample is pulverized to 90% passing 200 mesh (0.07 mm). The resulting 50 g pulps are analyzed by fire assay with an atomic absorption finish. Samples with results ≥ 1.0 g/t and < 10.0 g/t are re-assayed by fire assay with an atomic absorption finish. Results greater than or equal to 10.0 g/t Au are analyzed by fire assay with a gravimetric finish. For samples containing visible gold, a 500 g subsample of rock is analyzed by the metallic sieve method.

Qualified Persons

The Company’s scientific and technical information in this news release was prepared and reviewed by Mr. Gaétan Lavallière, P.Geo., Ph.D., Vice-President, and Mr. Ronan Déroff, P.Geo., M.Sc., Senior Geologist, Project Manager and Geomatician, both qualified persons as defined in National Instrument 43 101. Mr. Lavallière approved the information contained in this press release.

For more information, contact:Philippe Cloutier, P.Geo.President and CEOTelephone: 819-856-0512philippe.cloutier@ressourcescartier.comwww.ressourcescartier.com

Neither the TSX Venture Exchange nor its regulatory services provider accepts responsibility for the adequacy or accuracy of this press release.

A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/c953a9c7-683b-43a7-94b3-a67ff039821b