TSX-V: VEIN | FSE: N071
TORONTO, June 27, 2018 /CNW/ - Enforcer Gold Corp
("Enforcer" or the "Company") (TSX-V: VEIN) (FSE: N071) is pleased
to present a compilation of historical and 2018 drilling results
that highlight the gold-copper mineralization potential of the
North zone at the Roger Project. The Roger Project is
advantageously located 5 km north of Chibougamau, Quebec, has all-season road
access and is crossed by a power line that serviced the
past-producing Troilus Mine. Enforcer is earning a 50% interest in
the project from project operator, SOQUEM.
As reported in the Company's June 20,
2018 press release, 2018 hole 1206-18-94 returned continuous
lower-grade mineralization encompassing both the North and Main
zones over an impressive 514.5 m of
core length to a vertical depth of ~400 m. A copper-enriched gold
zone correlating with the North zone was intercepted from
79.5-129.5 m down hole, returning
54 m of 0.18 g/t Au and 0.11% Cu
(Table 1).
President and CEO, Steve
Roebuck, comments:
"The North zone appears to form an entirely different system of
mineralization from the Main zone of the Mop-II deposit. It has a
different style of mineralization whereby both copper and gold are
present in highly anomalous quantities over wide intervals. The
added copper component at the North zone makes it an important
exploration target and further work is planned to better understand
the geology and define its potential."
The North zone is currently poorly understood, given there is no
surface exposure and only 8 drill holes have tested the zone. Of
those, only 4 holes drilled by SOQUEM (2008-2018) systematically
assayed for copper and gold. Of the two 1986 holes reported in
Table 1, 86-MOP2-02 only reported sporadic assays while 86-MOP2-03
reported numerous copper assays but on discontinuous intervals. The
other two historical holes had only been assayed for gold and are
not reported in Table 1.
A drill hole location plan is available in the Roger Map
Gallery.
Table 1. Mop-II Deposit North Zone – Select Historic &
Current Assay Results
Hole
ID
|
From
(m)
|
To
(m)
|
Length
(m)
|
Cu
(%)
|
Au
(g/t)
|
Cu Eq
(%)
|
Au Eq
(g/t)
|
Note
|
1986
Holes
|
|
|
|
|
|
|
|
|
86-MOP2-02
|
82.30
|
83.30
|
1.00
|
0.53
|
1.13
|
1.21
|
2.02
|
|
86-MOP2-03
|
66.00
|
75.20
|
9.20
|
0.13
|
0.20
|
0.25
|
0.42
|
Partial
|
|
93.58
|
115.90
|
22.32
|
0.12
|
0.48
|
0.41
|
0.68
|
Partial
|
|
128.00
|
136.20
|
8.20
|
0.22
|
0.29
|
0.39
|
0.66
|
Partial
|
|
172.80
|
208.85
|
36.05
|
0.09
|
0.28
|
0.26
|
0.43
|
Partial
|
2008
Holes
|
|
|
|
|
|
|
|
|
1206-08-26
|
92.50
|
163.90
|
71.40
|
0.22
|
0.22
|
0.35
|
0.59
|
|
|
194.00
|
217.80
|
23.80
|
0.11
|
0.08
|
0.16
|
0.26
|
|
|
352.45
|
398.00
|
45.55
|
0.11
|
0.58
|
0.46
|
0.76
|
|
1206-08-27
|
146.00
|
190.00
|
44.00
|
0.12
|
0.20
|
0.24
|
0.40
|
|
|
205.00
|
240.00
|
35.00
|
0.08
|
0.18
|
0.19
|
0.31
|
|
|
295.50
|
330.00
|
34.50
|
0.16
|
0.18
|
0.27
|
0.45
|
|
2011
Hole
|
|
|
|
|
|
|
|
|
1206-11-52
|
51.10
|
66.95
|
15.85
|
0.13
|
0.18
|
0.24
|
0.40
|
|
|
92.50
|
117.00
|
24.50
|
0.11
|
0.09
|
0.16
|
0.27
|
|
|
307.75
|
357.00
|
49.25
|
0.14
|
0.13
|
0.22
|
0.36
|
|
2018
Hole
|
|
|
|
|
|
|
|
|
1206-18-94
|
75.0
|
129.5
|
54.5
|
0.16
|
0.18
|
0.27
|
0.45
|
|
Notes to Table 1:
All holes presented in Table 1 were completed by diamond (core)
drilling. Widths represent down hole core lengths; true widths are
unknown at this time. The 1986 holes were drilled by Flanagan Inc.
and the 2008-2011 holes by SOQUEM. Sampling of hole 86-MOP2-03 was
discontinuous, hence there are numerous intervals where no samples
were taken; a value of zero, "0" was assigned to these intervals to
calculate a weighted average for the entire interval. Copper and
gold equivalents were calculated using a US$1,270/oz gold price and
US $3.10/lb copper price.
|
QAQC
The 2018 Phase 1 drilling program was managed by project
operator, SOQUEM, utilizing standard industry procedures and
protocols and following a formal quality assurance and quality
control ("QAQC") program. Sample preparation and analysis were
performed by ALS Minerals in Val-d'Or,
Quebec, a CAN-P-1579, CAN-P-4E (ISO/IEC 17025:2005)
accredited testing laboratory. Gold grades are determined using a
standard fire assay with atomic absorption finish on a 30g
pulverized fraction. Samples grading above 2 g/t are re-assayed
using fire assay with gravimetric finish on a 30g fraction on both
the pulps and rejects. Copper was assayed by ICP-AES
following a four-acid digestion. Pulps and rejects from the samples
grading above 10,000ppm are re-assayed by ICP or AAS following a
four-acid digestion. SOQUEM routinely inserts blanks, duplicates
and standards in the sample sequence as part of its internal QAQC
program.
About SOQUEM
SOQUEM Inc., a subsidiary of Ressources Québec, is a leading
player in mineral exploration with its mission to explore, discover
and develop mining properties in Quebec. SOQUEM has participated in more than
350 exploration projects and contributed to major discoveries of
gold, diamonds, lithium and other mineral commodities in
Quebec.
About Enforcer Gold Corp
Enforcer Gold Corp is a Canadian-based mineral exploration
company and is earning a 100% interest in the Montalembert gold
project from Globex Mining Enterprises Inc. (TSX: GMX) and a 50%
interest in the advanced-stage Roger porphyry gold-copper project
from SOQUEM. Both properties are located in Quebec's prolific Abitibi greenstone belt and
have excellent road access and nearby infrastructure and
amenities.
Enforcer's VP Exploration, Antoine
Fournier, PGeo, is a Qualified Person as defined by National
Instrument 43-101 and has reviewed and approved the content of this
news release.
Neither the TSX Venture Exchange nor its Regulation Services
Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or
accuracy of this news release.
This news release contains "forward-looking statements" that are
based on expectations, estimates, projections and interpretations
as at the date of this news release. Forward-looking statements are
frequently characterized by words such as "plan", "expect",
"project", "intend", "believe", "anticipate", "estimate",
"suggest", "indicate" and other similar words or statements that
certain events or conditions "may" or "will" occur, and include,
without limitation, statements regarding the Company's plans with
respect to the exploration of its Roger project, the exploration
potential and analogous deposit potential of the Roger project and
the timing of the Company's exploration programs. Such
forward-looking statements involve known and unknown risks,
uncertainties and other factors which may cause the actual results,
performance or achievements of the Company to be materially
different from any future results, performance or achievements
expressed or implied by such forward-looking statements. Such risks
and other factors may include, but are not limited to, the results
of exploration activities; the ability of the Company to complete
further exploration activities; the ability of the Company to
complete transactions on terms announced; timing and availability
of external financing on acceptable terms and those risk factors
outlined in the Company's Management Discussion and Analysis as
filed on SEDAR. Enforcer Gold does not undertake to update any
forward-looking information except in accordance with applicable
securities laws.
SOURCE Enforcer Gold