TIDMEEE
RNS Number : 3720A
Empire Metals Limited
22 January 2024
Empire Metals Limited / LON : EEE / Sector: Natural
Resources
22 January 2024
Empire Metals Limited
('Empire ' or the 'Company')
Recent Drilling Confirms Extensive, Shallow High-Grade Bedded
Titanium Mineralisation
Empire Metals Limited (LON: EEE), the AIM-quoted resource
exploration and development company, is pleased to announce the
analytical lab results from the recently completed Reverse
Circulation ('RC') drilling programme at the Pitfield Project in
Western Australia ('Pitfield' or the 'Project'), which has
successfully identified extensive, shallow zones of high-grade,
bedded sandstone-hosted TiO(2) mineralisation.
Highlights
-- Analytical lab results have now been received for the entire
40 RC drillhole programme completed in December 2023,
confirming:
o TiO(2) mineralisation present in every metre, starting from or
near surface, in all holes drilled;
o all drillholes ended in TiO(2) mineralisation; and
o broad, higher-grade TiO(2) mineralisation in the
sandstone-rich beds, which consistently return higher- grade TiO(2)
mineralisation than the adjacent conglomerate or siltstone-rich
beds.
-- The RC drilling has shown that the shallow sandstone-rich
beds, and the associated higher-grade TiO(2) mineralisation, are
continuous with the deeper high-grade diamond drillhole
intersections drilled in Q4 2023 (DD23TOM001 and DD23COS001; RNS
dated 29 November 2023) confirming that there is an abundance of
thick, strongly mineralised sandstone beds that come to surface
within broad, plus 1.5km wide areas of this giant mineral system
and that these mineralised beds have a strike extent of at least 6
to 7km.
-- Every drillhole encountered thick intervals of higher grade
TiO(2) mineralisation (refer Table 1. Significant Intercepts), with
a select number of the more outstanding drill intervals highlighted
as follows:
o RC23TOM002 intersected 168 m @ 6.91% TiO(2) from 12m;
o RC23TOM003 intersected 180 m @ 6.14% TiO(2) from 0m;
o RC23COS004 intersected 154m @ 5.50% TiO(2) from 0m; and
o RC23COS005 intersected 148 m @ 6.18% TiO(2) from 6m.
-- It is clear from the results of this RC drilling that the
higher-grade mineralisation is found within the more highly altered
sandstone beds. The conglomerates and the siltstones are still
mineralised, but not to the same extent as the sandstones. This
provides a targeting tool for further exploration where previous
mapping and rock chip sampling identified high-grade TiO(2)
mineralisation within sandstones that can be prioritised for the
next round of drilling.
-- Additional RC drilling, which is planned to commence later
this quarter, will focus on further testing the known areas of
extensive, thick, shallow, sandstone-rich beds containing higher
grade TiO(2) mineralisation as well as several new target areas of
high-grade potential identified along the length of the coincident
regional magnetics-gravity anomaly
-- Mineralogical studies and metallurgical test work being
expanded towards accelerating the economic development of the
Pitfield Project.
Shaun Bunn, Managing Director, said: "This second, highly
successful RC drilling campaign has identified extensive shallow
sandstone-rich beds that contain higher-grade titanium
mineralisation, verifying our geological models and providing a
high degree of confidence in our ability to target higher grade
mineralisation elsewhere within this giant mineral system, which
will allow us to accelerate other activities essential for the
economic development of this project. A key highlight from all of
our drilling to date is that out of the 61 RC holes and the three
diamond drill holes completed so far, all but one RC drillhole
intercepted thick beds of high-grade TiO(2) mineralisation, and
that the single barren RC drill hole was terminated near surface
due to thick sand cover that collapsed the drill collar. Subsequent
RC drilling below the sand cover has confirmed TiO(2)
mineralisation.
"Our third RC drilling campaign is scheduled to start this
quarter and we are extremely excited by the prospect of making
further high-grade discoveries along the 40km by 8km giant mineral
system as well as providing additional metallurgical samples of the
already proven areas of near surface, higher-grade mineralisation,
which we see as integral in supporting an economic mine development
plan."
Empire holds a 70% interest in Pitfield which is comprised of
four granted Exploration Licences (E70/5465, E70/5876, E70/6320 and
E70/6323) covering 1,042km(2) . Pitfield is located near Three
Springs, a town 313km north of Perth, Western Australia on the
Midlands Road, which until the opening of the Brand Highway in 1975
was the main road route from Perth to the state's north (refer
Figure 1).
The Pitfield Project
Figure 1. Pitfield Project Location showing the scale of the
magnetics anomaly and coincident alteration footprint.
RC Drilling Programme #2 - November to December 2023 - Overview
of Drill Results
The analytical lab results from the second RC drilling campaign,
a 40 RC drillhole programme totalling a combined 5,718m, have now
been received and are summarised in Table 1: "Significant Drill
Results". The drilling was undertaken along the 30km length of the
high-density gravity core identified within the regional magnetics
anomaly, with particular focus being placed on the higher-grade
mineralised areas identified through recent rock chip sampling,
geological mapping and diamond drillholes (refer Figure 2).
The RC drilling has shown that these shallower sandstone-rich
beds, and the associated higher-grade TiO(2) mineralisation, are
continuous with the deeper high-grade diamond drillhole
intersections drilled in Q4 2023 (DD23TOM001 and DD23COS001; RNS
dated 29 November 2023) and confirms that there is an abundance of
thick, strongly mineralised beds that come to surface within broad
areas of this giant mineral system.
The RC drilling covered a strike length of over 25 kms and
identified near-surface areas containing high-grade TiO(2)
mineralisation that had not previously been drill-tested. The
TiO(2) mineralisation was intersected in every metre of every
drillhole, starting from or near surface, and all drillholes ended
in TiO(2) mineralisation. The drilling confirmed that there is
extensive, higher-grade TiO(2) mineralisation in the thick
sandstone-rich beds, which are returning consistently higher-grade
TiO(2) mineralisation than the adjacent conglomerate or
siltstone-rich beds.
Figure 2. Grey-scale magnetics map overlain by airborne gravity
survey results showing recent RC drillhole locations, previous
diamond core drillholes and maiden RC drillholes.
As seen in the previous drilling campaigns, the bedded
sedimentary rocks have undergone extensive hydrothermal alteration,
displaying a basin-wide alteration assemblage of
hematite-carbonate-epidote. Cross-stratal carbonate-quartz veining
is also common. The highest grade mineralisation intersected to
date is within the central and southern parts of the regional
magnetics anomaly, where drill intervals have averaged around 150m
grading better than 5.0% TiO(2) . These holes were drilled into
what appears to be coarser sandstones, which potentially had
greater porosity and permeability allowing for more intense
alteration and mineralisation. There is evidence of increased
carbonate, epidote and hematite alteration within these sandstones
which correlates with increased TiO(2) grade.
The results from this RC drill programme continue to further
define the giant scale of this titanium-rich mineral system, with
all holes intersecting significant intervals of higher grade TiO(2)
mineralisation. In addition, these results help to improve our
geological understanding of the Yandanooka Basin, and in particular
the place of higher grade TiO(2) mineralisation within
sandstone-rich beds within this basin. (refer Figure 3).
Figure 3: Simplified geological section of the Yandanooka Basin.
Note the sandstone-rich beds which are host to higher grade TiO(2)
mineralisation. West-East section looking North.
Focus on Shallow, High-Grade Exploration Targets - Areas for
Potential Mine Development
The exploration focus has shifted from the original drilling
targets at Mt Scratch to two extensive, high-grade zones which were
previously identified by surface sampling and subsequently
confirmed by recent diamond drilling. With the addition of these
latest RC drilling results there is good evidence that these
high-grade, sandstone-rich beds are continuous across several kms
of strike length. There is also evidence that additional
strike-extensive, thick, high-grade sandstone-rich beds are present
and parallel the high-grade sandstone-rich bed intersected in this
drill programme. However, to accelerate the economic development of
this project towards potential mine development, a focus has been
placed upon further delineation, sampling, mineralogical study and
metallurgical testing of this particular strike-extensive, thick
high-grade mineralised bedded zone.
A clustering of higher TiO(2) values in rocks was evident from
the geological mapping and rock chip sampling programme (announced
13 November 2023), which identified a high-grade area over 3km by
2km ('TOM') in the vicinity of diamond drillhole #2 (DD23TOM001),
as well as a 3km by 1km area ('COS') close to diamond drillhole #3
(DD23COS001), where the geochemical analysis of half the rock chip
samples exceeded 8% TiO(2) .
The three diamond drillholes, completed in September-October
2023, intersected strong, sediment-hosted titanium mineralisation
throughout the length of each hole, including thick, higher grade,
bedded intervals, with the bottom of each hole stopped in
mineralisation (announced 29 November 2023).
Sampling of the near-surface tops of the diamond drillholes was
impractical due to weathering and the friable nature of the near
surface sedimentary core samples. Therefore, one of the main
objectives for the second RC drill programme was to drill-test this
near-surface zone and demonstrate up-dip extensions of the
high-grade mineralised sandstone dominant beds that were
intersected by the diamond drilling.
The RC programme included 10 drillholes in the TOM area, which
is at the southern end of the overall giant mineral system (refer
Figure 4). All of the drill holes at TOM were strongly mineralised,
with half of the drillholes having mineralisation grading over 5.0%
TiO(2) .
RC23TOM002, which intersected 168m @ 6.91% TiO(2) from 12m
depth, was drilled to target the shallow up-dip interval of the
higher-grade bedded mineralisation previously reported in diamond
drill hole DD23TOM001, which intersected 297.1m @ 6.10% TiO(2) from
111.4m. The RC drill interval confirms that the higher-grade,
broad, sandstone-bedded mineralisation comes to surface at an
interpreted 65 degree dip angle, as depicted in Figure 5.
The most significant drillholes from TOM, which are all aligned
along the western side of the TOM target and bound an area of
greater than 1km by 1km, include:
-- RC23TOM002 intersected 168 m @ 6.91% TiO(2) from 12m;
-- RC23TOM003 intersected 180 m @ 6.14% TiO(2) from 0m;
-- RC23TOM004 intersected 154 m @ 5.38% TiO(2) from 0m; and
-- RC23TOM005 intersected 154m @ 5.13% TiO2 from 0m.
Figure 4: TOM area drilling locations over aerial image
Figure 5: TOM Cross Section 6726500 N showing interpreted
geology and confirmation of up-dip extension of higher-grade TiO(2)
mineralised sandstone-rich bed. West-East section looking
North.
The RC programme also included 13 drillholes into the COS area,
which is located in the central western portion of the giant
mineral system (refer Figure 6). All of the drill holes at COS were
strongly mineralised, with several of the drillholes intersecting
intervals of mineralisation grading over 4% TiO(2) .
RC23COS011, which intersected 154m @ 4.53% TiO(2) from 0m, was
drilled to target the shallow up-dip interval of the higher-grade
bedded mineralisation previously reported in diamond drill hole
DD23COS001 which intersected 173.2m @ 5.76% TiO(2) from 18.6m.
The more significant drillholes from COS, which are generally
aligned to the western half of the COS target include:
-- RC23COS004 intersected 154m @ 5.50% TiO(2) from 0m;
-- RC23COS005 intersected 148 m @ 6.18% TiO(2) from 6m.
-- RC23COS006 intersected 154m @ 5.18% TiO(2) from 0m;
-- RC23COS007 intersected 154m @ 5.79% TiO(2) from 0m ; and
-- RC23COS009 intersected 154m @ 5.01% TiO(2) from 0m.
Figure 6: COS area drilling locations over aerial image
Future Work
The planned third programme of RC drilling is scheduled to start
later this quarter, consisting of an additional 40 drillholes for
approximately 6,000m, which will test new areas identified as
potentially having high-grade, near-surface TiO(2) mineralised beds
as well as follow-up testing of the known areas of interest which
have confirmed thick, high-grade, near-surface bedded TiO(2)
mineralisation with 6 to 7km strike extent.
It is additionally planned to continue and expand the
mineralogical studies that have been initiated towards defining
representative host mineral assemblages, with results expected to
provide important information towards economic assessment,
including potential processing routes and to accelerate the overall
development of the Pitfield Project.
Significant Drill Results
Hole ID Depth From (m) Depth To (m) EOH (m) Interval (m) Grade Intercept
(TiO(2)
%)
90m @ 4.00% TiO2 from
RC23COS002 6 96 96 90 4.00% 6.0m
--------------- ------------- -------- ------------- --------- -----------------------
60m @ 4.00% TiO2 from
RC23COS003 10 70 70 60 4.00% 10.0m
--------------- ------------- -------- ------------- --------- -----------------------
154m @ 5.50% TiO2 from
RC23COS004 0 154 154 154 5.50% 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
148m @ 6.18% TiO2 from
RC23COS005 6 154 154 148 6.18% 6.0m
--------------- ------------- -------- ------------- --------- -----------------------
154m @ 5.18% TiO2 from
RC23COS006 0 154 154 154 5.18% 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
154m @ 5.79% TiO2 from
RC23COS007 0 154 154 154 5.79% 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
154.0m @ 2.77% TiO2
RC23COS008 0 154 154 154 2.77% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
154.0m @ 5.01% TiO2
RC23COS009 0 154 154 154 5.01% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
154.0m @ 4.98% TiO2
RC23COS010 0 154 154 154 4.98% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
154.0m @ 4.53% TiO2
RC23COS011 0 154 154 154 4.53% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
126.0m @ 2.42% TiO2
RC23COS012 28 126 154 126 2.42% from 28.0m
--------------- ------------- -------- ------------- --------- -----------------------
148.0m @ 2.38% TiO2
RC23COS013 0 148 148 148 2.38% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
146.0m @ 3.32% TiO2
RC23COS014 2 148 148 146 3.32% from 2.0m
--------------- ------------- -------- ------------- --------- -----------------------
148.0m @ 3.4% TiO2
RC23KAD001 0 148 148 148 3.40% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
148.0m @ 3.28% TiO2
RC23KAD002 0 148 148 148 3.28% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
118.0m @ 3.30% TiO2
RC23KAD003 0 118 118 118 3.30% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
148.0m @ 4.06% TiO2
RC23KAD004 0 148 148 148 4.06% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
148.0m @ 4.62% TiO2
RC23KAD005B 0 148 148 148 4.62% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
134.0m @ 3.34% TiO2
RC23KAD006 14 148 148 134 3.34% from 14.0m
--------------- ------------- -------- ------------- --------- -----------------------
146.0m @ 3.59% TiO2
RC23KAD007 2 148 148 146 3.59% from 2.0m
--------------- ------------- -------- ------------- --------- -----------------------
148.0m @ 4.33% TiO2
RC23KAD008 0 148 148 148 4.33% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
148.0m @ 2.54% TiO2
RC23MUT002 0 148 148 148 2.54% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
148.0m @ 4.48% TiO2
RC23MUT003 0 148 148 148 4.48% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
142.0m @ 4.35% TiO2
RC23MUT004 0 142 142 142 4.35% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
148.0m @ 4.57% TiO2
RC23MUT005 0 148 148 148 4.57% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
120.0m @ 4.77% TiO2
RC23MUT006 8 128 128 120 4.77% from 8.0m
--------------- ------------- -------- ------------- --------- -----------------------
168.0m @ 6.91% TiO2
RC23TOM002 12 180 180 168 6.91% from 12.0m
--------------- ------------- -------- ------------- --------- -----------------------
180.0m @ 6.14% TiO2
RC23TOM003 0 180 180 180 6.14% from 12.0m
--------------- ------------- -------- ------------- --------- -----------------------
154.0m @ 5.38% TiO2
RC23TOM004 0 154 154 154 5.38% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
154.0m @ 5.13% TiO2
RC23TOM005 0 154 154 154 5.13% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
154.0m @ 3.83% TiO2
RC23TOM006 0 154 154 154 3.83% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
154.0m @ 4.99% TiO2
RC23TOM007 0 154 154 154 4.99% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
154.0m @ 3.83% TiO2
RC23TOM008 0 154 154 154 3.83% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
142.0m @ 2.84% TiO2
RC23TOM009 0 142 142 142 2.84% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
148.0m @ 3.84% TiO2
RC23TOM010 0 154 154 154 3.84% from 0.0m
--------------- ------------- -------- ------------- --------- -----------------------
138.0m @ 4.41% TiO2
RC23TOM011 6 144 144 138 4.41% from 6.0m
--------------- ------------- -------- ------------- --------- -----------------------
136.0m @ 2.28% TiO2
RC23MTS019 4 136 136 132 2.28% from 4.0m
--------------- ------------- -------- ------------- --------- -----------------------
140.0m @ 4.49% TiO2
RC23MTS020 8 148 148 140 4.49% from 8.0m
--------------- ------------- -------- ------------- --------- -----------------------
60.0m @ 4.34% TiO2
RC23MTS021 6 66 66 60 4.34% from 6.0m
--------------- ------------- -------- ------------- --------- -----------------------
72.0m @ 4.51% TiO2
RC23MTS022 4 76 76 72 4.51% from 4.0m
--------------- ------------- -------- ------------- --------- -----------------------
Table 1. Significant Intercepts from RC Drilling Programme #2.
Competent Person Statement
The technical information in this report that relates to the
Pitfield Project has been compiled by Mr Andrew Faragher, an
employee of Eclipse Exploration Pty Ltd, a wholly owned subsidiary
of Empire. Mr Faragher is a Member of the Australian Institute of
Mining and Metallurgy. Mr Faragher has sufficient experience that
is relevant to the style of mineralisation and type of deposit
under consideration and to the activity being undertaken to qualify
as a Competent Person as defined in the 2012 Edition of the
'Australasian Code for Reporting of Exploration Results, Mineral
Resources and Ore Reserves'. Mr Faragher consents to the inclusion
in this release of the matters based on his information in the form
and context in which it appears.
Market Abuse Regulation (MAR) Disclosure
Certain information contained in this announcement would have
been deemed inside information for the purposes of Article 7 of
Regulation (EU) No 596/2014, as incorporated into UK law by the
European Union (Withdrawal) Act 2018, until the release of this
announcement.
**ENDS**
For further information please visit www.empiremetals.co.uk or contact:
Empire Metals Ltd
Shaun Bunn / Greg Kuenzel Tel: 020 4583 1440
S. P. Angel Corporate Finance LLP Tel: 020 3470 0470
(Nomad & Broker)
Ewan Leggat / Adam Cowl / Kasia
Brzozowska
---------------------
Shard Capital Partners LLP (Joint Tel: 020 7186 9950
Broker)
Damon Heath
---------------------
St Brides Partners Ltd (Financial Tel: 020 7236 1177
PR)
Susie Geliher / Ana Ribeiro
---------------------
About Empire Metals Limited
Empire Metals is an AIM-listed (LON: EEE) exploration and
resource development company with a project portfolio comprising
copper, titanium and gold interests in Australia and Austria.
The Company's strategy is to develop a pipeline of projects at
different stages in the development curve. Its current focus is on
the Pitfield Project in Western Australia, which has demonstrated
to contain a newly recognised giant mineral system that hosts a
globally significant titanium discovery. The Company is also
advancing the Eclipse-Gindalbie Project in Western Australia, which
is prospective for high-grade gold and also kaolin used to produce
high-purity alumina, an essential component in lithium-ion
batteries.
Company also has two further exploration projects in Australia;
the Walton Project in Western Australia, and the Stavely Project in
the Stavely Arc region of Victoria, in addition to three precious
metals projects located in a historically high-grade gold producing
region of Austria.
This information is provided by RNS, the news service of the
London Stock Exchange. RNS is approved by the Financial Conduct
Authority to act as a Primary Information Provider in the United
Kingdom. Terms and conditions relating to the use and distribution
of this information may apply. For further information, please
contact rns@lseg.com or visit www.rns.com.
RNS may use your IP address to confirm compliance with the terms
and conditions, to analyse how you engage with the information
contained in this communication, and to share such analysis on an
anonymised basis with others as part of our commercial services.
For further information about how RNS and the London Stock Exchange
use the personal data you provide us, please see our Privacy
Policy.
END
DRLBIGDBGBDDGSB
(END) Dow Jones Newswires
January 22, 2024 02:01 ET (07:01 GMT)
Empire Metals (AQSE:EEE.GB)
Gráfica de Acción Histórica
De Oct 2024 a Nov 2024
Empire Metals (AQSE:EEE.GB)
Gráfica de Acción Histórica
De Nov 2023 a Nov 2024
