Cassidy Hits 64.06 G/T Au Over 9.0m at Sanu Filanan, Kouroussa Gold Project, Guinea
05 Septiembre 2007 - 12:41PM
Marketwired Canada
Cassidy Gold Corp. (TSX VENTURE:CDY) is pleased to announce results from reverse
circulation (RC) drilling on its 100%-owned Kouroussa Gold Project, located in
Guinea, West Africa. Drilling continued to focus in and around the high-grade
Sanu Filanan deposit. Highlights include 25.97 g/t Au over 20.0 metres in
KRC1378, 2.94 g/t Au over 48.0 metres in KRC1379, 17.05 g/t Au over 9.0 metres
and 64.06 g/t Au over 9.0 metres in KRC1381, and 12.21 g/t Au over 9.0 metres in
KRC1404. True thicknesses are estimated to be 70% of reported lengths. Drilling
has been suspended for the remainder of the wet season, resuming in early
October.
Sanu Filanan
Seventeen RC holes totalling 1853 metres were completed over the northern
section of the Sanu Filanan zone, to extend, define and upgrade the gold
resource. One hole, KRC1378, drilled at the south end of Sanu Filanan,
intersected 25.97 g/t Au over 20.0 metres, thus upgrading the resource in that
area. Similarly, KRC1379, extended broad, high-grade mineralization (2.94 g/t Au
over 48.0 metres) to surface in the central portion of the deposit. KRC1381 was
successful in highlighting two high-grade intervals on the northwest extension
to the zone. KRC1381 intersected 17.05 g/t Au over 9.0 metres on the western
limb and 64.06 g/t Au over 9.0 metres on the original Sanu Filanan trend. Thirty
metres to the northwest, KRC1404 intersected 12.21 g/t Au over 9.0 metres on the
western limb and 7.40 g/t Au over 5.0 metres and 2.35 g/t Au over 6.0 metres on
the original trend. KRC1403 was collared too far north to intersect the western
limb but did intersect 2.85 g/t Au over 8.0 metres on the original trend.
Table 1 Sanu Filanan Results
------------------------------------------
Hole ID From (m) To (m) Length (m) Au (g/t)
------------------------------------------
KRC1374 60.0 74.0 14.0 0.98
------------------------------------------
and 78.0 80.0 2.0 0.71
------------------------------------------
and 87.0 91.0 4.0 1.10
------------------------------------------
and 112.0 113.0 1.0 4.28
------------------------------------------
and 123.0 124.0 1.0 1.49
------------------------------------------
and 131.0 138.0 7.0 7.17
------------------------------------------
KRC1377 55.0 60.0 5.0 0.92
------------------------------------------
and 103.0 104.0 1.0 3.99
------------------------------------------
KRC1378 33.0 53.0 20.0 25.97
------------------------------------------
and 68.0 69.0 1.0 2.43
------------------------------------------
KRC1379 1.0 49.0 48.0 2.94
------------------------------------------
and 53.0 55.0 2.0 1.02
------------------------------------------
and 59.0 75.0 16.0 0.90
------------------------------------------
and 79.0 83.0 4.0 1.46
------------------------------------------
KRC1380 3.0 20.0 17.0 0.88
------------------------------------------
and 34.0 36.0 2.0 0.60
------------------------------------------
and 97.0 109.0 12.0 2.20
------------------------------------------
KRC1381 6.0 15.0 9.0 17.05
------------------------------------------
and 60.0 63.0 3.0 0.69
------------------------------------------
and 114.0 123.0 9.0 64.06
------------------------------------------
KRC1387 5.0 16.0 11.0 1.17
------------------------------------------
and 20.0 23.0 3.0 0.72
------------------------------------------
KRC1388 3.0 6.0 3.0 4.05
------------------------------------------
KRC1389 11.0 13.0 2.0 1.98
------------------------------------------
KRC1400 68.0 74.0 6.0 0.86
------------------------------------------
and 84.0 86.0 2.0 0.79
------------------------------------------
KRC1403 62.0 70.0 8.0 2.85
------------------------------------------
and 123.0 124.0 1.0 9.26
------------------------------------------
KRC1404 16.0 25.0 9.0 12.21
------------------------------------------
and 33.0 34.0 1.0 2.36
------------------------------------------
and 118.0 123.0 5.0 7.40
------------------------------------------
and 127.0 133.0 6.0 2.35
------------------------------------------
KRC1408 34.0 37.0 3.0 0.88
------------------------------------------
and 102.0 105.0 3.0 0.92
------------------------------------------
and 112.0 114.0 2.0 2.30
------------------------------------------
The western limb of the northwest section of Sanu Filanan remains open and
demonstrates the potential to identify additional high-grade lodes adjacent to
the Sanu Filanan deposit. Other intervals of gold mineralization in the Sanu
Filanan - Sanu Folo intersection also highlight this potential.
Sanu Filanan East
Nineteen RC holes totalling 1821 metres tested the 300 metres of prospective
ground between the Sanu Filanan and JJ Vein deposits. Previous drilling had
suggested the possibility of narrow but high-grade zones between the two main
mineralized structures. Latest drilling has confirmed this potential. Highlights
include 14.49 g/t Au over 5.0 metres in KRC1302, 12.20 g/t Au over 2.0 metres in
KRC1291, and 2.20 g/t Au over 7.0 metres in KRC1284. Significant mineralization
adjacent to the Sanu Filanan and JJ deposits would enhance the mining economics
of the deposits. More definition drilling is required to bring this
mineralization into resource.
Table 2 Sanu Filanan East
Hole ID From (m) To (m) Length (m) Au (g/t)
------------------------------------------
KRC1281 28.0 31.0 3.0 2.37
------------------------------------------
and 39.0 40.0 1.0 1.06
------------------------------------------
KRC1283 37.0 43.0 6.0 1.10
------------------------------------------
KRC1284 4.0 11.0 7.0 2.20
------------------------------------------
KRC1285 4.0 5.0 1.0 1.35
------------------------------------------
and 9.0 10.0 1.0 1.21
------------------------------------------
KRC1287 24.0 30.0 6.0 1.33
------------------------------------------
KRC1291 10.0 12.0 2.0 12.20
------------------------------------------
and 23.0 24.0 1.0 1.53
------------------------------------------
and 67.0 69.0 2.0 2.76
------------------------------------------
KRC1292 27.0 28.0 1.0 10.40
------------------------------------------
and 88.0 89.0 1.0 2.00
------------------------------------------
KRC1293 7.0 8.0 1.0 44.00
------------------------------------------
and 36.0 44.0 8.0 0.70
------------------------------------------
and 68.0 69.0 1.0 15.20
------------------------------------------
KRC1294 8.0 9.0 1.0 1.10
------------------------------------------
KRC1295 79.0 80.0 1.0 3.35
------------------------------------------
KRC1302 21.0 26.0 5.0 14.49
------------------------------------------
KRC1303 8.0 9.0 1.0 0.96
------------------------------------------
KRC1304 57.0 59.0 2.0 1.32
------------------------------------------
and 67.0 68.0 1.0 0.99
------------------------------------------
KRC1305 86.0 90.0 4.0 1.10
------------------------------------------
and 97.0 101.0 4.0 0.55
------------------------------------------
Sanu Filanan Extension
North of the Sanu Folo structure, a program of 24 RC drill holes and several
diamond tails totalling 3052 metres was completed in two main areas. Immediately
north of Sanu Folo, the main Sanu Filanan structure extends to the edge of the
Koekoe gabbro. The best result is 1.44 g/t Au over 8.0 metres in KRC1406. Two
hundred metres further north, Sanu Filanan Extension is a separate zone, widely
dispersed in the saprolite. Recent drilling tested the zone further to depth,
demonstrating the continuity of mineralization to depth and the multiplicity of
zones. Interpretation of this zone is progressing. Highlights include 0.89 g/t
Au over 8.0 metres, 1.41 g/t Au over 4.0 metres, and 1.76 g/t Au over 5.0 metres
in KRC1375.
Table 3 Sanu Filanan Extension
---------------------------------------------
Hole ID From (m) To (m) Length (m) Au (g/t)
---------------------------------------------
KRC1347(i) 151.2 152.0 0.8 1.16
---------------------------------------------
KRC1353 26.0 27.0 1.0 0.96
---------------------------------------------
KRC1375 38.0 46.0 8.0 0.89
---------------------------------------------
and 50.0 54.0 4.0 1.41
---------------------------------------------
and 64.0 65.0 1.0 1.16
---------------------------------------------
and 70.0 75.0 5.0 1.77
---------------------------------------------
KRC1376 12.0 14.0 2.0 1.64
---------------------------------------------
KRC1385 16.0 18.0 2.0 1.66
---------------------------------------------
and 36.0 37.0 1.0 2.02
---------------------------------------------
and 50.0 54.0 4.0 0.50
---------------------------------------------
and 97.0 99.0 2.0 0.71
---------------------------------------------
KRC1390 33.0 37.0 4.0 0.89
---------------------------------------------
KRC1391 16.0 21.0 5.0 0.73
---------------------------------------------
and 26.0 29.0 3.0 0.69
---------------------------------------------
and 34.0 36.0 2.0 3.63
---------------------------------------------
and 114.0 115.0 1.0 4.31
---------------------------------------------
KRC1392 2.0 3.0 1.0 1.44
---------------------------------------------
KRC1394 44.0 49.0 5.0 0.73
---------------------------------------------
and 54.0 55.0 1.0 1.34
---------------------------------------------
and 59.0 62.0 3.0 1.11
---------------------------------------------
and 69.0 70.0 1.0 1.16
---------------------------------------------
KRC1395 26.0 28.0 2.0 0.68
---------------------------------------------
and 33.0 35.0 2.0 0.82
---------------------------------------------
KRC1396 17.0 18.0 1.0 1.62
---------------------------------------------
and 99.0 102.0 3.0 0.62
---------------------------------------------
KRC1397 54.0 56.0 2.0 0.55
---------------------------------------------
and 61.0 63.0 2.0 1.34
---------------------------------------------
and 84.0 85.0 1.0 1.37
---------------------------------------------
and 92.0 94.0 2.0 0.96
---------------------------------------------
and 105.0 106.0 1.0 1.61
---------------------------------------------
and 118.0 119.0 1.0 1.16
---------------------------------------------
KRC1398 6.0 9.0 3.0 0.73
---------------------------------------------
KRC1399 119.0 121.0 2.0 0.75
---------------------------------------------
KRC1405 33.0 34.0 1.0 1.85
---------------------------------------------
and 45.0 47.0 2.0 0.94
---------------------------------------------
and 132.0 135.0 3.0 0.75
---------------------------------------------
KRC1406 90.0 98.0 8.0 1.44
---------------------------------------------
(i) diamond drill core
An updated location map will be posted on www.cassidygold.com shortly.
The Sanu Filanan deposit consists of near surface, potentially open-pittable,
mainly oxide resource, outlined over a strike length of 900 metres. In September
2006, RSG Global Consulting estimated an indicated resource of 161,000 ounces of
gold in 1,552,000 tonnes grading 3.2 g/t Au and an additional inferred resource
of 205,000 ounces in 2,811,000 tonnes grading 2.3 g/t Au. An independent
technical report describing the details of the resource study is posted at
www.sedar.com.
Next Steps
The current phase of resource drilling is now complete for the remainder of the
wet season. Drilling is planned to resume in October. RSG Global Consulting has
been retained to complete resource modelling and deliver an updated resource
estimate by early October. SENET (Pty) Ltd. of South Africa and RSG Global
Consulting have been retained to complete a Scoping Study for Kouroussa based on
the updated resource. Completion of the scoping study is projected for January
2008. An Environmental and Social Impact Assessment (ESIA) program is planned to
begin in October 2007.
Sampling and Assay Procedures
RC drill samples were collected from the cyclone and split using a 1 in 8 riffle
splitter down to approximately 2.5 kilograms in size. A rock saw split HQ size
drill core samples over sample lengths of 0.5 to 1.5 metres. All samples were
sent to the SGS analytical laboratory in Siguiri, Guinea for further sample
preparation and fire assay using a 50-gram sub sample. Along with SGS internal
quality control procedures, external field duplicates, blanks and certified
standards are undertaken over 5% of all sampling. Quality control/quality
assurance is closely monitored by RSG Global Consulting personnel.
Christopher J. Wild, P.Eng, VP Exploration for Cassidy Gold Corp, is the
Qualified Person for this release.
On behalf of the Board of Directors, Cassidy Gold Corp.
James T. Gillis, President & CEO
This press release may be accessed at Cassidy Gold Corp.'s website:
www.cassidygold.com and at www.sedar.com.
If you wish to be placed on Cassidy Gold Corp.'s e-mail press release list,
please contact us at cassidygold@telus.net.
Cassidy Gold Old (Tier2) (TSXV:CDY)
Gráfica de Acción Histórica
De Sep 2024 a Oct 2024
Cassidy Gold Old (Tier2) (TSXV:CDY)
Gráfica de Acción Histórica
De Oct 2023 a Oct 2024
Real-Time news about Cassidy Gold Old (Tier2) (TSX Venture Exchange): 0 recent articles
Más de Cassidy Gold Corp. Artículos de Noticias